Search results

If it's a humming coming from the front end and it increases with speed it's probably your wheel bearings. I had the same problem back in Feb. I picked up two new hub assemblies from Autozone for $90 a piece and 2 hours later problem solved! hth!

Sold (traded actually)

Rubicon Express (RE 1467) 4* axle shims Here is a link to Rubicon Express Brand new, still in package. $20 plus shipping or will trade for 1.75" poly coil spacers

I have a set from my 96 (in good shape) you can have for $20 plus shipping from 39532. PM me if interested.

I need the axle end track bar nut/bracket. I don't need the bolt, just that nut thats tack welded into the L shaped bracket that goes on the rear of the axle. The bolt threads into it. Thanks!

You will definitely need them, the question is what size shim? Are you going to be running a 4.5" spring with longer shackles? If so 4* shims should do. If you are going to be running a 5.5" rear spring with stock shackles then a 6* shim should do. I actually got exactly 5" of lift in the...

It's a poser pic, but here's my 4" with 31's...

I also used the factory bottle jack to install mine. I attatched the axle end of the lca first then raised the frame end up to see how far I needed to push the axle forward. Doing it this way also allows you to see the hole and know when it's lined up. I put the base of the bottle jack...

The bolt that goes through the spring eye (lower bolt) should be torqued to 109 ft/lbs and the bolt that goes in to the frame (upper bolt) should be torqued to 85 ft/lbs. This is what I have done with mine. I asked this very question on the JU forum and someone replied with these results from...

This is 4" with 31's

Actually it's 96+... that's when DC decided to go with the longer output shaft and slip yoke. Most people think it was 97 because that's when they changed the body and interior. I know because I drive a 96 and did the sye thing!;)

Kilby Enterprises makes a plate holder that connects to the roller failead. It's $25 here's a link to their page... http://www.kilbyenterprises.com/plate.htm hth

Rusty's sells them Front and Rear Sway Bar Drop SW-25 $18.00/pr

Actually if you buy Rusty's HD trac bar frame mount it comes with the new end to work with the bracket. I called him about this last week and he assured me that in order to upgrade the standard trac bar all you had to purchase was the new bracket for $89. hth