Search results

My last set did not do this. It's on all 4 tires and they haven't been rotated yet so most likely not an alignment issue. It's mostly confined to the inner and outer lugs of all tires but the centers also have it to some degree. AFAIK I am not rubbing on anything other than some slight rubbing...

I just finished putting on 5" lift, and clayton long arms. I set caster "roughly" with an angle finder to 5* but the laser alignment showed actual caster of 7.2* I know this is within the values for the FSM, but is a bit above what clayton reccomends. It should be an easy enough fix, I just...

2000XJ, no start, no spark, strong cranking condition. 4L When using the autorange on my fluke 88v, I get 450kilo ohms. I've heard you want it set to 1-10kOhm and look for 0L scale but my meter does 600.0 Ω, 6.000 kΩ,60.00 kΩ, 600.0 kΩ, 6.000 MΩ, and 50.00 MΩ. and it reads OL for 6kOhm and...

Noticed a big puddle of coolant on the ground today and opened the hood to find some coolant running down the engine, grabbed the the upper radiator hose plugs in and a geyser of coolant shot out. Fixed that no problem with a new hose from NAPA. Now just I ran to the store and when I key off I...

I'm curious to see if anyone has used these quickfist rubber clamps to secure their fullsized co2 in their cargo area. Pictures would be helpful.

I have been having some problems with my a/c since I got the jeep. It works ok, but likes to cycle on/off with some belt squeal. A while back I put some r134a into it without checking the pressure, re-tensioned the belt, etc. Well I looked at it today and appears I have overcharged it to about...

I did run a search before posting but there are so many threads out there about sliders that I was not able to find an answer. I have my AJ's rails painted and ready to mount. My question is regarding the rear leaf spring hanger. I am assuming that it is not supposed to mount through the...

Guy on a gun forum posted this for help trouble shooting a whining/chirping noise coming from his front end. I'm thinking front d/s u-joint or cv joint in the double-cardan but was wondering what you guys thought? http://www.youtube.com/watch?v=ti96LVC_V-A&feature=player_embedded

Happens while moving and while standing still. Doesn't matter whether the jeep is on or off i hear a creaking or squeaking sound. Did a search everything i found pointed to ujoint or ball joint but would it still do this even with the jeep is stationary and off? lubed tie rod ends and made sure...

My front seat had been squeaking for a while and i had meant to look into it but apparently it gave up and that sheet of metal that it bolts to on the seat itself broke off and it now rocks forward when braking. I have a 2000xj with manual seats and was wondering what years would be a direct...

I have been leaking oil ever since i bought this jeep. It is not a whole bunch of oil, just an occasional drip that goes down the back of the block gathers along the transmission bellhousing and oilpan and drips off of both. I replaced all the cheap and easy seals oil filter orings, valve cover...

I went up in the snow today, hit pavement and had poor braking power. However they were fine by the time I got home. Can the cold just make brakes act funny? Ice on the calipers or something weird like that? It was strange.

Is the speedo adapter and oring supposed to sit compressed on top of the housing or is it supposed to go inside I have not been able to get it to fit in.

Is this something that I can get at napa or do I have to goto chrysler/jeep parts dept. I am talking about the hard plastic tube going from the elbow fitting at the back of the valve cover and running into the intake manifold.

Want to correct my new gauge cluster with the proper mileage.

Was out camping with some buds and started the jeep to warm up this morning and someone pointed out a rather large sooty footprint my exhaust was making on the snow. Is this normal or do I have something going on? No codes other than the occasional cylinder 3 misfire 2000 xj's are known for.

I've noticed ever since i bought my jeep used, that it kicks into a higher idle every few seconds. I timed it tonight and counted the compressor kicking in 8 times in one minute. It does this ONLY when the a/c is on. Is this low freon? The A/C seems to work very well, but I've picked the jeep...

Got everything for my lift installed but decided to get a new trackbar rather than ghetto it up and drill a new hole for the stock trackbar. I guess what I am asking is: What do I need tool wise and what does the over all process entail. I've never done this before. Are there any tricks I...