Search results

my clutch pedal went dead on my 91 4.0 5spd while i was driving it the other day so immediately i figured it was the master or slave. i checked underneath and there was fluid all over the drivers side frame rail. so i replaced the master and tried to bleed it and it worked for about 2 miles...

so i searched and searched and gave up. where is the write up on how to change the odometer of your "new" gauge cluster to that of what you originally had? thanks

i sprayed out my tb and got it nice and clean. but now, the jeep won't start. it just turns over and over and over. what is goin on? did i screw up the iac or tps? any insight would be appreciated. thanks

i'm beginning to get frustrated now. first off, my '91 wouldn't start but everything else electrical would work. i replaced the ignition switch and it solved the problem. a week later on cold startups, it would begin to buck and stumble. i replaced the tps and that solved that problem. but...

my temp gauge in my '91 cluster is all messed up, so instead of cannibalizing another cluster just for one gauge, i was thinking of getting a new autometer phantom electric temp and oil pressure gauge and trying to "splice" them into the stock cluster. has anyone done or attempted this? i...

well, my heater has been squealin for quite some time now and on the way home from work, it all of a sudden stopped. is this the motor that i need to replace? how would one go about this? its on a 91 with the 4.0. thanks!

my 7100's don't appear to like climates where it snows and gets wet and are rusting like crazy. what do you do to take care of this. i assume you have to buff them, but which compound do i use and how do you keep this from happening again? thanks

i have a 91 cherokee and have installed an external power steering cooler. i was wondering if anyone knew what size the fittings are for the return line as i keep blowing the hoses off my flared metal lines. i would like to put some hose barbs on to secure it a little better so has anyone put...

so i am going back to a stock steering wheel after i have had the momo on my jeep for years. it is going on my galant vr4 for a much needed steering wheel update. anyways my question is what do i need to make the horn work on the stock setup? is there a rod and spring that contacts when the...

is there a reason why it has always been hard to shift into second with my 5 spd? i know jeep trannies aren't made for racing, but when i shift at higher rpms when wheelin it gets harder to shift. anyone else have this problem? could it be that the tranny is building more pressure at higher...

i burned out my front blinkers below the headlights and so i decided to replace them with led conversion bulbs. i have some in my tails and they look awesome and are really way brighter. i hooked them up and also installed a no-load flasher but they still don't even turn on. what am i missing...

so i have my on board air hooked up and everything works fine, but was wondering about the intake filter. right now i don't have an oiler but i just take the filter off and put a couple of drops of oil in before i use it and it works fine but because everything else in the engine bay is water...

does someone have the part # for the larger dodge 1/2ton replacement tie rod ends? i need to switch a couple out. thanks

i have the goferit tie rod which i believe have the dodge 3/4 ton tie rod ends and because of the larger TRE, they interfere with my swaybar mounts. if i get the HD currie drag link, will this fix the interference problem? will the dodge TRE mate with the currie drag link? thanks

i am looking to replace my steering wheel and was wondering if a '95 and up wheel would bolt to my 91 column to give it a more modern look. i know they had airbags but could you just gut the airbag and put the cover back in place. also, if you have one layin around, lmk. thanks

i am looking for a stock cherokee steering wheel. i have a momo on my jeep now and am looking to go back to stock. i would prefer a black or dark gray leather bound, non-perforated, but let me know what you have. also might be interested in a 95 and up to make my 91 interior a little more...

i did the test to see if my clunking noise is the tcase chain is stretched and it is affirmed. so...i need to replace the chain, it's got almost 170k miles on it. is there any upgraded chain that i can buy or should i get an oem one from the stealership, checkers...junkyard? what have you...

i am looking for the oval firewall access rubber plug that measures approx. 2.5x1.75 and is located right next to the rear most spark plug. anyone have one that they can get rid of. i'm scared to find out what the stealership wants for one. email me at [email protected] if you have...

so i ordered a bushing end for my hd tracbar mount and they sent me the tre. so, their loss is your gain. it is the longer threaded tre that will work for 6". comes complete. 20 plus shipping richie

does anyone know what size bolt is on the axle end of the uca? i lost the stock ones somehow when i took apart the front. i used some calipers but then noticed that the bushing sleeve has reducer bumps in it. any help would be great. thanks, richie