Search results

I received this e-mail & I want you to ensure that under no circumstances are you to renew my membership, regardless of any old authority that may exist for a payment to be met by either a credit card or direct debit. I do not wish to be a member any longer. If I find...

My 285/70R17 is on the roof. On a Jeep rack.

How much?

So what does the sender in the thermostat housing do? 1999 Update 4.0l. I have been getting occasional fluctuations in speedo & tacho and the temp gauge drops to 40 (degrees Celsius), and the Scangauge plugged into the OBD2 socket follows it. It will then swing to around 112 deg Celcius and a...

They even work if your XJ is upside down, in Australia. Happy with the service & the product.

Just ordered........good to see a vendor manufacturing products for RHD.

TC is probably 1996........XJ is '98 build. TC has two wire switch in the rear of TC (next to speedo sender), whilst XJ's TC has three wire switch on top of TC. When screwed out of housing, later switch protrudes out of its housing about 5mm more than early one. If noone knows I can live...

Does anyone know either: 1. Will the three wire switch for the "Range Lights" work if screwed into an early TC next to the speedo sender and work as it should? 2. If not, does anyone know which two of the three wires in the late loom will work with the early switch? I have searched and can't...

Received free PCM today from o-gauge-steamer......and it works perfectly. Thank you for trusting a member of this Forum, and I hope you received your postage outlay.

Ask anyone you know that has fitted a locker, even a lunch-box..........they'll have spares. ;) Simple to replace.

o-gauge-steamer, I don't seem to be getting to you by PM. Please e-mail me: [email protected]. if this is convenient.

Some background......all XJs sent to the land of Oz were fitted with a security system. I have a few Jeeps, but I have an early '98 build which I am building for off road. A bit over a year ago I took it to Cape York (6000km round trip), and tried to give it swimming lessons. Had water up to...

Need to check what my export '98 is using. If these are correct, I'll be in touch within 24 hours.

Brian, does this despatch date include the ones you are sending to me in Australia? PM me if you like. Chris Berger.

In Australia the Ford Territory SUV has 17x7 5 on 4.5 wheels. CB needs to be skimmed by .9mm. Will be putting a set on one of my Jeeps soon. Pics to come.

I've replaced the E12s with hex head bolts in the couple I've done. ;)

1998 4.0l AW-4 After a couple of weeks of the torque convertor not locking up intermitintly, it stopped locking up at all. I located the TCU and measured the resistance accross the solenoids.....all three were the same at 14.1 ohms. Checked operation of brake light switch...all okay. I...

Re: Anyone that hasn't adjusted there Throttle Valve cable do it. WOW. I have had a harsh shift, intermittently, from 2 to 3 for some time on my '99. This adjustment seems to have fixed it. Can't believe the difference in driveability. Many thanks to the OP.

Carves, my grey one has a 1/98 US build tag on the door, but is OZ complianced 1/99.....& doesn't have body colour flares, so I don't really know what model it really is. It is, however, back on the road......so my TJ can have a rest. ;)

Just got back from exchanging SKIM modules. Fired up straight away with the matching key held beside it while using the original key in the ignition. The original keyless entry remote appears to still work the locks. Will just tape the key to the module and refit inside the column for now and...