Search results

I have a stock 2001 engine bay but I am just seeing thread. If you need any pics of anything, text me 520-six six one-1638 and happy to take some shots for ya. Im crawling all over it the next few days anyways.

In response to clydefrog,,,, there is no debate that the bumper checks all the boxes on what you want. I agree with that. I am just pointing out to others, that they should know going in that you will either 1) need to buy more hardware and parts (if you are 2000 or newer or have a skid plate...

Oh one mor new development. Exhaust rattles against bumper. Yaaaay Sent from my iPhone using Tapatalk

I dont usually push out derogatory info on the web. I usually find it to be a waste of time. This bumper however needs to be redesigned and I thought I could save others some time. I should point out that I have been in cherokees for about 20 years and know them pretty well. I am also a...

95 cherokee, 4x4, 4.0, se installed a small 2 inch lift, springs up front, full leafs in back. Threw on some 31 1050's bought 4 shocks (with more extension) and only installed fronts and havent had time to install rears. You know, its been raining alot and Im a nancy. Here is the dumb...

I have broken a couple of studs on my cherokee. And every time I go to Checkers, I seem to get the wrong one. Either not enuff splines or seems a little too long. Anyone know what part number etc I should ask for? 95 cherokee, SE, 4x4 with drums in back.

"Looks good, any provision for winch mounting?" Yes front "drop down" is pre set to add plate for winch.

Hey all, I am starting a new project and wanted to get input from everyone. I have noticed while digging around here that it seems the first thing we all do is add a lift and tires then move onto bumpers etc. (assuming it is running right). Maybe I am wrong but the 1000 "check out my bumper"...

I have a 96 XJ SE. It came factory with no center console (floor). Just shifter, 4x4 lever and Ebrake between the seats. Center mount not offset. I got tired of not having any storage or an armrest so I bought one online used from ebay. Slid right in except for having to take a little off...

Ya know, now that I am thinking about it more, I had to replace the manifold and part of that process said I needed to bleed the fuel. When I hit the valve it just dripped out instead of spraying from pressure like I thought it would. However, then when I went to emission test it, they said my...

Thank you for the response. Will try it at end of day. Jeep will have been sitting long enuff at that point. Thanks again

Hi everyone, I have a 1996 4.0 with 135k miles on it. It runs strong, no issues at all. However, when I start it, it seems to take a bit. Probably 5 cranks and then pops off. This only happens when it has been sitting for awhile. Meaning if I stop, go in somewhere for a half hour and come...

Ok, thanks everyone. I thought the belt was D### tight. I will check it again,,, If no dice, will check the other pulleys, thank you.

96 Cherokee 4.0 . Bought my Cherokee, runs like a champ. However, I get a squeal ONLY when the a/c is turned on. Took off belt (looks like new) and replaced it with a brand new one. A/C works perfectly. Squealing goes away as engine heats up, but it is crazy annoying. Assuming I am...

HUBS97, If you re read my post I CLEARLY state that I am only providing the cheapest and if he wanted more performance to look elsewhere for more educated posts. Wasnt butt hurt and not trying to correct you, I thought you meant with parts or other issues it ended up being cheaper. That was...

"If $100 is that big a deal to you, don't fix anything- ever." Now there is some sage advice. Thank you. From this day forward I will not fix anything if it costs over $100. EVER! I will also never recommend a fix cheaper than $100...

Im not sure how that is the cheapest route? I dont think it comes close to $67 with gasket including shipping does it? When I was asking about this one of the forum guys said "well it lasted for the first 13 years, so would you be happy with another 13 years?" That is when I decided to get...

I just had to install a header. From what I have read on this site, minimal gains can be had with the 4.0 and as such I decided not to go with performance as much as price. If you want performance, skip this reply and go to those with more knowledge. If you are looking for price, here is the...

I am in the middle of doing this now. I actually just took it off last night as my new header was scheduled to be in today. Some things to offer: If you really reasearch on here, you will get some great advice and tips that will make the job easier. MAKE SURE you hit all of your bolts with...

I suppose because I like the idea. It is stark, sturdy and cheap. Since it is steel I will be able to fab in compartments and if I dont like them I will just grind them out. Finally, if it looks terrible, to take it out will leave 4 small slits in the carpet (for the bolts) and that will be...