• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Search results

  1. A

    Offset and 31's? Looks/Performance

    I ran 31X10.50 on a 3" lift with wrangler rims (5.25 BS). Only a slight rub at full lock.
  2. A

    My new MJ interior

    Very Nice!!!!!! :)
  3. A

    31x10.5x15" on stock rims?

    I ran 31X10.5 on stock rims and 3 inchs of lift for a while. Only a little rumbing on the lower control arm at full lock. Bot bad :gag:
  4. A

    What to buy with $100

    Rusty's air tube and a K&N air filter :)
  5. A

    CB antenna mount

    Very Nice :)
  6. A

    Comanche stock height measurements?

    I did a spring over on my 1990 MJ. It had an AAL (3") before I started. I but 4.5 coils and a 1 3/4 BB in the front and it is still slightly lower in the front. The best part is it doesn't have any DW or vibrations. No drive shaft mods.
  7. A

    ok, lets talk about money

    $5,800 worth of Mods on a 1990 MJ. 6 inch lift and 33s. I am in the process of adding a Dana 44 so the spending never stops. Work in progress!!!!!!!!!!!!!!!!!!!
  8. A

    What does everyone think of this antenna mount?

    I'd suggest a wilson magnet mount
  9. A

    MJ lift question

    Rusty's has a MJ SOA kit that will give you every thing you need. I had a AAL in the rear and 3" coils in in the front. When I did the SOA in the rear I added 4.5 coils and 1 3/4 BBs. It is still higher in the back. I would suggest deciding on the tire size before you lift. If you want to...
  10. A

    3" lift and 31x10.5: Will 4" backspacing work?

    I ran 3 inches of lift with 5.25 BS for a while. There was a little rubbing on the lower control arm at full lock. I did not think it was to bad! Then inchitus set in :laugh3:
  11. A

    whats in a good quality CB antenna

    Wilson 1000 connected to a cobra 29. You can put a super modulation kit in the cobra for a few bucks and out talkd most CBs with a linear amp!!! Cannot beat this combination.
  12. A

    exhaust? who,s heard what ? and how's it sound

    I have a flowmaster 50 and if I did it again I'd go with the 40. It isn't very loud at all. I believe there are sound tracks on the flowmaster web site too!
  13. A

    Hodge's Renix Stroker Build up.

    Sounds good - keep us posted
  14. A

    Do I need anything else for this lift????

    The 3" lift on my MJ did not have any thing but coil springs and AAL stuff. It did fine!
  15. A

    Help!!!

    I hope your bro is ok and it is a cheap/easy fix for your XJ
  16. A

    Which kit for 4.5" of lift

    I have bought several items from Rusty's (including their 4.5 lift kit) and talked to them on the phone several times. I have no complaints. I have a year of driving and all is well. I would suggest calling each company and ask them all the questions you want and formualting your opinion from...
  17. A

    Stock Fender Flares

    Spray the nuts with PB Blaster or WD 40 for a couple of days. I took mine off by a 1/4 turn forward and a 1/4 turn back and then a 1/2 turn forward and a 1/4 turn back. (if you get the picture) So - on and so on - slow and easy. If you just unscrew you stand a chance of breaking the bolts...
  18. A

    Loss of Fuel Economy

    Is it possible your catalytic converter is pluged up???? :wierd:
  19. A

    exhaust? who,s heard what ? and how's it sound

    I have the flowmaster 50 and it's not too loud and if I had it to do again I'd put in a 40. :wave:
  20. A

    gas choices, who uses what

    Cheapest and lowest octane :laugh3:
Back
Top