Search results

I did some searching around and got a bunch of mixed answers on the bushing size for the Rough Country leafs. I have their 4.5" leaf pack and would like to replace the bushings in the front and rear eyes, as well as the ones in the shackle (shackles are stock). Do you guys know if they use the...

My rear tires got a hold of the bumper caps and are starting to rip them off. So, I've been looking for a rear bumper without the tire carrier. Do you guys have any reccommendations for a rear bumper that's priced well and looks decent? (Meaning it lines up with the body lines and isn't just a...

My lift came with adjustable rough country control arms -- the old style before the x-flex joints. The threads on the passenger side arm have finally wallowed out causing a clunking noise in the front end. So, I'm looking at purchasing new lower control arms, but am having trouble deciding...

I noticed a knocking noise coming from my front end and it turned out to be the LCA bushing on the frame side. However, I'm having issues finding correct replacements. The control arms are the old adjustable style (before the flex-joint) with rubber bushings on both ends. Any ideas on where to...

I've searched and looked through numerous threads trying to figure out my problem, however I haven't found anything that has really helped me out. So, I'm posting this thread hoping to solve my problem. A little background -- my jeep had the infamous 0331 cracked head, which I did not catch...

Hey guys, Just ran into an issue with my Jeep. My buddy noticed that my Jeep was making a clicking noise, just sitting in the driveway. Went to go out and check it out. Keep in mind the vehicle is shut off. I went to go start it up, it stuttered some like the battery needed jump but it...

Hey guys, Once my Jeep is at a dead stop, and I go to pull away, it's almost like the transmission stays in neutral. After a second or two, it finally goes into gear. It only does this once I come to a complete stop. Could this be an issue within the transmission or perhaps a sensor of some...

I just installed a new winch bumper with a light bar, and was thinking about purchasing some fog lights within the next month or so. Which fog lights do you recommend? I've been eyeing up the IPF 968CSG's and Hella 500 Black Magic lights. I'd like to spend no more than $150.

Just installed the Rough Country Winch bumper and figure that I'd post some pictures. I have the set of d-ring mounts/d-rings on the way, and am still trying to decide between the light bar or stinger for it.

Hey all, My Cherokee has been diagnosed with the infamous 0331 cracked head at approximately 110,000 miles, therefore I've decided to replace the engine with another 4.0L. But, here lies the question. What year Jeep engines (4.0L) are compatible with the Cherokee?

I'm getting a high pitched noise, almost like a squeeling or hissing coming from what seems to be my exhaust. I first thought it was the serpentine belt, so I had it replaced, but the problem was still there. After checking it more thoroughly, I found that it was coming from underneath the...

Last year I decided to upgrade my lighting and went with Delta H4 E-Code Housing, aftermarket harness, and PIAA bulbs. However, they are not up to my par anymore, and am looking for something brighter. Therefore, I've decided to go with HID's. I was looking at DDM Tuning's 55w HID Kit and was...

Does anybody know where you can purchase the rubber cushions, metal washers, and nut kit that go onto the FRONT shock bolt in order to hold in the fender well? The nut holding the shock onto the fender well came loose and fell off and I lost some of the parts.

I was wondering exactly what I need to do to replace the seal on the tail cone housing of JB Conversion's SYE kit? Do I need to put a sealant between the outer edge of the seal and the housing as well? I emailed them and they gave me the part number "National #472572". This is the seal I'm...

After about a month of having my SYE installed, I noticed that it was leaking slightly out of the tail cone seal where the yoke goes into the it. It's a small leak, not even enough to drip off the t-case but I still want to fix it. So, I thought that perhaps the yoke came slightly loose and...

I was looking around for an alternative headlight wiring harness, I just think the BOR kit is too expensive. I found this harness from suvlights.com. I need the 9003/H4 type, am I correct? Do you think the harness will get the job done?

I did a lot of searching around and I'm stuck between getting either the Hella E-Codes with the 100/80W Hella Premium Xenon Blue bulbs, or the Delta Tech H4 Housings with the bulbs that come with them. I'm also going to purchase the headlight harness from BOR. Which do you guys recommend?

To start the thread off, yes I did search. I looked around on JCR, AJ's, RigidCo, and TnT. I liked TnT's front bumper but the price tag is a bit too steep. With JCR, AJ's, and RigidCo I found that their designs were almost similar. Do you guys reccommend any other quality manufacturer's...

I'm having trouble getting the one link coming down from the transfer case shifter inside the vehicle to pop back into place on the actual transfer case linkage itself. I tried taking channel locks to get the rubber bushing back into the hole, but that did not work. Have any ideas? Here's a...

I was wondering if the speedo gear needs a retaining ring so it does not move around on the spline shaft. There's no mention of it in the instructions but it seems like it'd move around. I believe this is the reason my speedometer is not working due to the fact that it's shifting up and down...