Search results

Sure do. Orig. offer stands @ $20 shipped :wave1:

Sorry been outta town a few days for work. The bracket is the standard XJ front bracket that comes with a ProComp 3" lift.

Used but good condition ProComp track bar bracket. $20 shipped anywhere in the US. :)

Two qty. 1.5" wheel spacers with studs & nuts to fit XJ, TJ and such. $60 shipped :)

My 95/96 setup had the spacer & I used it on my '90 model. Didn't occur to me to see if it was absolutely neccessary, though.

I highly recomend the booster/mc swap for you. If you are pulling the parts yourself, pulling the brake pedal & stoplight switch from the donar XJ will save you some work. As far as I know, the inner workings of the proportioning valves are different between the disc/drum versus disc/disc...

To clarify, the proportioning valves are not any different for rear drum-to-rear drum equipped vehicles. If you are swapping to rear discs from drums, yes the prop valves are different.

I do not think the proportioning valves are any different, but the valve on my booster/mc/valve combo was mounted on a nifty little bracket that tucked the valve up close to the mc instead of mounting it on the fender. Probably personal preference on that one, but I really like it. I did not...

This past weekend I swapped in a booster/mc/proportioning valve from a 95-96 Xj into my Comanche. I had removed the load-sensing valve from the rear during a mild lift to add 31's. I had read several posts & a couple of write-ups on this swap, but found a couple areas that I feel I can add a...

Looking to upgrade my brake system & need 1995-96 XJ brake booster, 1/4" plate, mast. cyl, and prop. valve with all the fittings & lines in between. (NON-ABS system) Shipping to business address at 38141. Hook me up! :)

By adding the lift shackles, you rotated the pinion angle UP a few degrees. Dropping the t-case will not fix this = you will need to get some steel shims to rotate the rear housing back closer to where it should be. HTH

Interested in brake parts (booster, etc.) This rig have ABS or no? Thanks -

Can anyone confirm or deny that there were different length pinion yokes for the earlier/later model 8.25 rear? I read 1/4" someplace but can't find much info on it. Thanks -

Looking for a set of late-model Jeep stock wheels, I like the Ecco style (prefer the darker grey but lighter silver is ok) Other styles considered. No tires, please. Shipping to 38141 (TN) business address. I can provide shipping cartons to you custom made to fit so don't be afraid to ship :)...

Okay I got the BMW valve ($5 - Riiiiight!) When you put yours on, did you use the clamps that came with the kit? Thanks!

By eliminating all the other things that could cause the fuel pressure to bleed down ;) Thanks for the good info - I found a couple threads on the BMW check valve also.

Yeah, the old "long starting time" deal. hasta I searched & found a buncha good info on the situation, and am zeroing in on the check valve in my fuel pump. My question is, approximately how long should fuel system stay preesurized after the vehicle is parked? A few hours? Overnight? Over...

Sorry technically wrong forum but this thing would make a killer trail rig for somebody. I am in No way affiliate with this ad! Diesel MJ

A tent shop can make the canvas/window parts for you. All you'd need is to design & build the metal framework. Aluminum would be sweet - not cheap, tho.

Rescue is Dodge Ram based platform. That dude is BIG as in Suburban big (perhaps not as long) Gladiator is supposedly a 2007 Wrangler variant. It's wider than the current TJ & of course has the different rear frame for the extra wheelbase & bed.