Search results

I had the same symptoms... Went through a ton of trouble and some cash. Check your fuel pressure, your fuel pump dying out has of your symptoms. I pulled my pump and found that the fuel tube had corroded away inside the tank, along with the filter screen being clogged up. Anything below the...

Check fuel pressure. Mine started jumping on the rpms when the fuel pump began to die. High temps could be a super lean condition brought on by not enough fuel pressure and the computer is going bonkers trying to compensate. Might not be the issue, but lots of same issues I had that led to...

These are the first set that was being sold for use in the 4.0 the Olds V8 version (PN S50026A). I used to have the whole V8 kit, but I lost the extra two sets since I first installed from moving twice. Dave

As the title implies, I am going to make an adapter to install my Renix EGR onto the newer intake. The Why: I am PCS'ing again (twice in 5 months...:gonnablow) and the new State requires visual and tailpipe (idle and load). I am also tired of seeking out the less desirable inspection centers...

Adjustable 1.6 roller rockers $250 OBO. Nothing wrong with them, just switched out heads and I am running Mopar rockers. PM me and we can work out shipping... Should be less than $14 for priority box Dave

I forgot how fun Battlewagon was to drive. Now that I am back in the 'garage' tune zone with this motor the power has stepped back up. I still need to retune my AF with the O2 analyzer so I can dial in the adj MAP. It was nice to burn the tires a bit from a dead stop, haven't done that in a...

New pump installed. Pressure right at 44lbs! Yay,party1: I may readjust up to 49 psi to get my full 30lbs out of my injectors... Still deciding and will have to run some tests to see what major differences will be. Oh, and yes in the photo is the infamous renix fuel rail working just fine on...

New spectra pump next to old for reference... Yummy

Wow! Can of worms indeed! Look what I found in my gas tank. This pump died at every location possible. I especially love how the feed tube is not connect/failed rubber.... Notice the missing worm clamp? Mmm that is gunna be fun fishing out! the filter sock is totally black, yes a few years ago I...

On you problem with the tranny mount on the CM. I bought the tranny mount for a YJ which is centered as opposed to the offset XJ mount. It mounted perfect. Before that it was just a smidge off, like 1/8 to 1/4" to the side. I think I have the PN somewhere and I will post it. You think RC would...

Ha! Too funny you mention the grounding. I am currently following that thread and fixing grounds. I used the search and found it. I have replaced all the big stuff with battery cable stuff (firewall, battery to firewall, head to firewall, block to firewall, and rad cover to firewall) now hitting...

Well zero residual pressure is yummy 2 minutes after shut down And 9-10 lbs during operation is not good either Fuel pump shows up tomorrow

To true on the tranny building heat. I usually steer folks to get that first before spending big cash on a new rad set. My AW4 would heat up fast on the rocks and towing the boat. I cannot say which did more for my rig, the new rad or separate tranny cooler.

Price aside. The flex o lite is a good cooler. I have it and have the external trans cooler. I lost my serpentine belt on the highway driving across Arizona in May and the rig did not overheat. That cooler is extremely efficient and will keep it at 160 when you remove the T-stat. I had the new...

Well I have the dreaded 'stalling' condition when my rig gets to running temp (185-195ish). I am writing about the fix while I am waiting for parts to come in the mail. This is such a can of worms since battle wagon's motor has been modified in almost every system. I have the full Renix system...

Hitch and bumper gone

Not new by any means. Just a full kit minus the mounting brackets. We ended up having to cut the brackets. Kit is assembled Hub and rotor (all bearings and seals are still good and intact), '73 ford front disc brake calipers with good pads and the non braided tubing. Without the brackets I...

$200.00 sound good. For all the stuff, brackets, calipers, rotors, hubs, bolts and things. I can have it ready after Sunday Dave