Search results

i have a 96 motor with a 5 speed tranny. i can take first gear all the way to 6 grand second gear all the way to six grand and 4 all the way to six grand the problem is in third gear once i get to 2800 3000 the motor falls flat on its face and i have no idea where to start to look for the...

ive got a 96 jeep cherokee manual transmission. when i bought the jeep it had the cluster that did not include the tachometer, so i went to the junk yard and pulled a cluster that did. i knew the oil pressure gage was not going to work but the tempeture gage doesnt work either, do i need a...

i was driving my 96 jeep cherokee the other day when i went over a rather large bump, well as soon as i it the bump my jeep shut off no backfire no spitting sputtering nothing. it cranks real easy, but never start, i have fuel at the fuel rail, and all my lights and everything electrical works...

hey guys im trying to help my buddy get his joop threw emissions, the check engine light is on and its throwing code 72 catalytic converter circuit code if i replace the converter will this fix the problem or am i missing something, i plan on doing the down stream o2 while im there, help need...

when i let my jeep idle the oil pressure light comes on, and when the motor is running and you pull the dipstick out it sucks air in what could be the cause any help ?

i have a 96 xj and have just raplaced the slave cylinder and hose, and i am now having troubles. i can shift gears fine, put it in gear take it out fine, but if i sit with the clutch in and with it in gear, for a little while just a couple seconds sometimes my jeep will start creeping forward...

88 cherokee laredo, electrical problems, blown radiator, no head liner. Runs good, 5 speed tranny, 4wd works, new exhaust, heat and ac work, normal leaks. located in baltimore maryland, 500 dollars, ill be getting a new radiator this weekend, if someone doesnt want it sooner let me know if your...

i replaced my slave cylinder a little bit ago, went out four wheeling and snag my clutch hose on somethig it is now leaking, does n e one know whjere i can get just the hose the dealership sells only the three part combo, master slave and hose, help please, its a 96

i went to rausch creek yesterday with my 1996 cherokee, and it was runnign and wrking good all day, but when i was just sitting still letting the engine idle the oil pressure warning light would come on, i checked the oil level and it is fine, could the oil pump be bad, or a sensor, if i step on...

any one running approxiamitly 5 inches with 32 1150's i was wondering i disconnect the sway if they will rub or should i start the cutting now thank for help ill be getting the lift soon and ill get pictures

i live in maryland, and ive been searching around, for a place to wheel, i know theres rousch creek but i was wondering if there was a place to go where i didnt have to pay maybe just a local spot thanks

does any one know if the water pump off of and 89 xj 4.0 will fit a 96 xj 4.0?

i have a 96 xj with 3 inches of lift on it, stock arms, stock pittman arm nothing relocated ...yet. i just bought a set of 32 11.50's for 300 for all 4. well imagine that they rub, so im gonna do longer shackles out back, and a 1.75 spacer up front. i know i need to do a transfer case drop. get...

ok 96 xj with an 89 xj block and 96 xj intake the serpentine belt rubs the engine block right before the elt gets to the harmonic balencer any ideas on how to fix or any help im at a loss to fix this one thanks

ok so i have a 96 xj that i had 31 1050 on but they were worn out so i started looking for a new set of tires and came across a slightly used set of 32 1150 for a killer deal i was hoping to get away with out them rubbing to bad...wishful thinking. they rub when you turn the wheel about 3/4 so i...

i have a 96 cherokee se 4wd 5 speed im trying to get it threw inspection the guy is telling me i need a new clutch switch, ive searched the forums and im getting confused, did the 96 xj's come with one, if so where is it located, thank you for your time

i have to replace the passenger side upper control arm bushing on my 96 cherokee i was wondering the best way to get it out was

i have to replace the ball joints in my 96 xj i was wondering the best way to go about i have never fooled with the front end but im very mechanically inclined i dont know exactly how to get them out or what i need to take of to do so any help is apprecaited thanks you

i took my jeep out on the road for the first time since i bought it, after i got it running, and i was cruising at like 25 mph and hit a pot hole nothign huge but when i hit it the whole front end felt like it was wabbling around almost like wheel bearings were bad but i checked them and they...

i have 1 1996 xj, i bough it with a blown motor for 400 dollars replaced the motor, and the check engine light is on, i retrieved the trouble codes they are 12, 21 and 42 i know one is the oxygen sensor but the other two im not sure what they mean, any help or tips are appreciated thank you