• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Search results

  1. R

    Cheap homebrew leaf pack

    Cheap homebrew leaf pack tech writeup and pics A long time ago I posted about using a Dodge Van leaf spring main leaf. I thought I might revisit that mod. Initally I used S10 leaves below the stock main spring, which netted a lot of lift, but had the shackle pointing straight down or slightly...
  2. R

    crank radial runout

    ok, I've got this posted on the oem list, but was wondering if anyone in here knew what the radial runout tolerance is on the crank snout. thanks joel
  3. R

    Crankshaft runout

    Does anyone know how much runout is allowed on the nose of the crankshaft? I'm not worried about the main journal runout, but i'm concerned about the nose of the crank. Thanks Joel
  4. R

    Alternate leaf spring donors

    Ok, here it is. Any dodge van from 79-97 will work in an XJ, The distance from the center pin to front eye bushing is 23 inches, which is exactly the same as the stock cherokee. The rear half ot the dodge spring is between 30.5 and 31 inches pin to eye. (some 1 tons are 30.5 and 30.75) the...
  5. R

    !@#%$#%$# Crossmember

    When I built my long arms, I modified the stock crossmember to get mount the lca's, (notched the crossmember on both sides and welded in rect tube, welded the side seams, welded this, welded that, ect, ect..... When I started to fab it, I laid out the angles and started cutting,...then realized...
  6. R

    91 XJ Progress pics

    It has been a while since my last post, and I just wanted to share some pics of the 91. At this point the interior is 95 percent done, and the last couple of major things to do are front and rear bumpers, and strengthening the long arm mounts... Here is a list of all the mods I have...
  7. R

    CAD or blueprint?

    Does anyone have a CAD or blueprint or offset drawing of the stock XJ suspension? I was thinking about building some scale prototypes. It's either that or I'll have to cut the body off one and flip it over :) but I think my wife would appreciate it if I didn't have a full scale XJ chassis...
  8. R

    91XJ project

    rusted out 91xj, hit in the front and rear: cut out the rotten rockers and replaced them with 2x6x3/16 rect steel I made custom coil spacers 3.5" and put in zj v8 non uc coils used the middle 2 leaves from a 95 s10 pickup, only kept the top and bottom leaves from the original pack...
  9. R

    ok,3rd try, check out my heavy duty rocker replacements

    Hey I think I solved the red X problem,lemme know what y'all think.... :)
  10. R

    now we have no more red x's(rocker replacement

    let me know what you think, 2x6x3/16 rect steel tube
  11. R

    one rocker replacement done

    finally got one side put up, what do you all think? 2x6x3/16 rect steel tube
  12. R

    pic test

Back
Top