Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
So as my screen name suggests I have 1990 XJ 4.0 auto and have been recently dealing with a intermittent rough idle. I narrowed it down to the #2 injector not getting a signal. And when I say it’s intermittent, I mean it depends on how the Jeep starts. If the Jeep’s starts and is running on all...
While I have the head off the Jeep I’d like to have it cleaned up and inspected and new valve seals thrown in. I don’t see a need for a valve job but if the price is right... Looking for recommendations in the area. Willing to drive a little bit for a better service, but again, I’m not looking...
So I’m in the middle of replacing my head gasket and also planned on doing the rings while I was that deep into things. I also had a ton of blowby and was low on power. What brand rings for stock pistons are recommended? The bores look good but I’ll be doing a quick dingle ball hone to freshen...
So it may be asking a bit much but there is a guy on CL trying to get rid of a rear axle I'm wanting to pick up. It's an HO72 so it's big and heavy. Due to our scheduling conflicts and him being unwilling to simply leave it outside for me to pick up during the day(which I can understand), I...
Like title says, Rigidco tire carrier. NO BUMPER! Have no issues with it, just prefer to see out the back and not have over 100 lbs hanging off the back. Comes with new spindle. I also added the gerry can holder and bolts to mount a hi-lift. Held my 35" spare no problem. Would just need to weld...
Recently installed assist on my XJ. PSC ram 3/8" hoses blah blah blah. Still running a D30 locked on 35' with beadlocks.
Never had an issue flat towing before the hydro assist. Now when I do, the jeep wants to turn passenger and stay. I tried unbolting the ram, no dice. Adjusted the toe a bit...
Finally bit the bullet and got a tow rig for the ol jeep. Traded in the rice rocket car. It's an 07 gmc. Lbz, crew cab, long bed, 4wd, leather, bose, OBA, gun rack blah blah blah
like the title says. 95% tread. Has one plug dead center of tread. Also patched on inside. No leaks. Overall good shape. Good spare tire. Won't ship. How's $40?
Last few months ive been working on fabbing a 3-link and making a completely flat belly. I also wanted the crossmember to have a removable center. Here's how it started
2x6x1/4" box. I recessed where the trans mount goes. I then added link mount. The lowers are from Barnes and I made the...
selling some parts i have no need for.
21 spline NP242 w/ RE hack n tap and flange adapter. completely rebuilt a couple years ago. works perfectly. bezel and shift gate available if wanted. $250
RE adjustable superflex arms. uppers and lowers. lowers could use new rubber bushings. not bad...
Looking to go flat belly and my 242 is just too big. I have no use for full time 4wd with an auto locker up front. Maybe even a trade for a 231 w/sye. My 242 has an RE hack n tap and was completely rebuilt a few years ago. Let me know whatcha got
Tom
Selling my used two row all copper/brass radiator. It is a CLOSED system radiator. The best part is that I am also selling with it the Mac's aluminum expansion tank. Those aren't cheap. Both worked fine. No leaks. Kept my jeep below 210 always. Just tired of the burping process. I'll sell both...
Selling a set of four well used 33x10.5 KM2's. Probably about 25% tread left. The edges are rounded. The sidewalls have rock rash. Slightly chunked. They all hold air fine. No patches or plugs. I don't mind splitting them up for spares. $160 for all four. $50 each. Prices OBO. Just want them gone.
as the title says, i have a brand new JCR steering spacer as well as the drivers side frame tie in bracket. this is essentially exactly what the C-ROK steering brace kit is. i already had the C-ROK kit so when i installed my JCR bumper, i saw no need to swap out the same parts. i have the...
like the title says, i have a full set of factory tow hooks with all the brackets and hardware. you would only need two 1/2" x 3.5" bolts for the last hole on each bracket. i also tied both hooks together with a piece of 1/4" flat bar so that they would resist bending when being pulled to the...
I am selling my roof rack since I don't use it anymore. It is just under 4' wide and 5' long. Has four gutter mounts. Expanded metal floor. 3/16" x 1.5" flat bar braces under the expanded metal. So i is kind of heavy. I bought it an it was small so I made it bigger. It is welded. Worked great...
recently removed my truetrac to have a grizzly installed. it works perfectly. i bought it new less than a year ago. jeeperjohn did the install. it is for 3.73 and numerically higher gears. good piece for those with the NP242 that want to retain the use of full time 4wd. theyre nearly $400 new...