Search results

I would by new leaf springs for the rear and a shackle just because its not modifing stock equipment they are designed to keep their hight with wear and tear. you could fit 33's with your lift but you would need to do some triming or cut out fender flares. but if you want more hight go to a six...

33's will fit on a 3" with cut out fender flares just watch on the flex and the spacing on a set of wheels helps.

yea they will fit the original owner of my cherokee had 31's on it stock. they would roll just as long as you didn't do any offroading when pullin a trailor it rubbed in the back. i quickly got smaller tires but the 29's will fit just as long as the spacing on the wheel is correct.

I agree if your goin heavy offroading get some steel braided brake lines. the kit should work fine.

If you get only a 4 in lift you will need to trim to fit 33's i would suggest buying some rusty cut out flares or bushwacker flares to make the cuts look cleaner. and the superlift isn't a bad lift jsut call them and figure out their packages you might get a deal.

the only thing it does is make the angle in the steering the same as stock to keep it out of a bind with the higher you go the more angle added to the steering.

i'd get a drop pitman arm just to keep the stress on stearing to a minimum. Try a JA500 from Skyjacker

once you have rethreaded it. try it with a larger heavier duty washer or you could try a lock washer. and if all else fail WELD!!!! jjk

the Jsrb231a has undergone some changes in hardware which make it easier to install no welding just bolt on