Search results

From what you have posted it does sound like there is an issue. Using a good multimeter a fully charged 12V battery is about 12.7 Volts. When running (charging) the system should be reading less than 14.7 volts but over 14V

If you are in Lakewood and zoned R-1-6 then you can look up zoning details here: http://www.lakewood.org/Documents/Planning/P-DA/Zoning_Ordinance/LakewoodZoningOrdinance-Adopted02-10-2014.aspx See section 17.5.5: Accessory Structures and Elements (page 5-27) for details on what you are looking...

In Lakewood you do not need a permit for a shed up to 120 sqft. Sounds like you were looking at Jeffco's codes....are you managed by Lakewood or unincorporated Jeffco? If you are unsure you can look it up on their website. If your address pops up you are bond by that AHJ's codes. Jeffco...

If you come out this way you will learn that strangely enough, that isn't unusual, lol. It could hail, tornado, snow and be 80 degrees in the same day here without hardly surprising people.

I did the same thing when I learned about Prime. I figured out what I paid in shipping and it has more than paid for itself. Plus, I used to look around for the free shipping in the past and wait 5 days. 2 day shipping on practically everything is really nice. The problem is that I think I buy...

You may likely already know about the factory dent, but I feel compelled to ask...are you certain it is a dent the Drive shaft created and not the factory DS clearance "Dent"?

There is a lot of discussion about what twist is best, and really it comes down to your particular ballistics and usage. 1:7 is a faster twist then 1:9. Think about a heavier bullet needing a faster twist to help stabilize it better for flight. 1:9 can provide better ballistics and terminal...

I personally am not familiar with JSE surplus, but I also have never heard anything bad. It looks like it is 416R SS barrel. SS used to be all the hype, though I am not sure the opinion today. The "R" makes is a bit softer than 416 for the machining process. I believe 416R is G2G. This barrel...

Oops, missed that post. Then based on what you have said, here is my suggestion for whatever it is worth. First off, it does not sound like you want to bother with Class 3 weapons (SBR, Cans, etc.) It also does not sound like you need super, long range target shooting accuracy. In your case it...

Forgot to mention that one reason I like to support companies like PSA and Spikes is because they support our rights. Things like this: http://www.spikestactical.com/salesinformation.html

PSA is great. I use them all the time. I would recommend doing a little research on ar15.com. Most everyone says they are G2G: http://www.ar15.com/forums/t_3_118/562032_.html http://www.ar15.com/forums/t_3_118/543180_.html http://www.ar15.com/forums/t_3_118/537515_.html I have been particularly...

Ordered steering and panhard kits...great deal, thanks! :cheers:

For anybody keeping track, Gen 2 mags shipped today. Gen 3 and 20LR back ordered. So Gen 2 is taking about 6 weeks to ship from order date. Pretty good considering

Just voted, lol..dead tie! Team Petty Cash 165 50% Duct Tape Motorsports 165 50%

Thats a god point, I totally agree with you. I prolly should of said something more like a "Softer compound tire" or something to the effect.

Oh and in regards to your question about contact area/PSI...I tent to think more in the terms of float, or dig, or grab rather then pressure per inch. Generally wider tires "float" and "grab" better. That's why I think you see narrow tires on mudders or sometimes snow bashers. Narrow tires...

I think the big comment here is "for Colorado". You can argue details for other areas, but for here there is just something about being able to air a 12.5" tire way down and just float down long bumpy access roads/trail heads which otherwise just woulda rattled your nugin. (how the **** do you...

EDIT Edit: I am thinking they will be close and Kasteins assertions are good things to look at. My guess is that the abs sensor/tone ring in each unit bearing is going to throw the dimensions off to work with the XJ d30 stubs Oh and just to add the JK Unit Bearings are kinda crappy compared...

Jk is 5 on 5

Based on what you said, I am really happy with the Remington 700 based on overall availability, cost, and quality. Alot of people like the fat bull barrel but that gets heavy for tromping through the wood so just a standard barrel. I have I .300 Win Mag but keep in mind that is one expensive...