Search results

Well i am having a little issue with my steering sytem. Everytime i go over a bump, the steering wheel actually bounces up and down. Not left to right. Ive asked a few people and they said that is definately not good. I tore into the cab trying to find any looseness in the column but didnt find...

After doing a lift swap from my 92 to my 97 i ran into this little problem. After it was all complete i had one last thing to do. Put the driveshaft on. Man oh man was that a nightmare!! Even though im using the same axle, t-case and lift kit from the 92, the drive shaft seems to be a little...

I have a 5.5 RE XD kit. And was wondering if i should install the bumpstops that came with the kit. Pros and cons?

How far do i tighten the center pin on the leaf spring?

97 xj 4.0 auto When im stopped and not moving my temp gage reads normal at 210. Then when i accelerate, it goes all the way down. Could this be a faulty gage? :cry:

This has been a pain in the ass for me to get exploded views of the 93 np231 and the 97 np231. s well as the 93 AW4 and the 97 AW4. Let me get to it now. Lets say u unbolt the 242 off the 97 AW4. And u look at the output splined shaft on the 97 AW4. Then u do the same on the 93 AW4 with the...

Hmmmmm, which one? :sunshine:

Whats the diff between a 92 xj hood and 97 xj hood? Will they work on eachother? :repair:

I have a 97 4.0 auto. And was stopped at the end of my street going to turn onto the main street. When i put my foot on the gas to go, It went and then immediatly felt like it was stalling. But i dont have a manual (stick). Then when i put the pedal all the way to the floor it caught and...

Is this correct angle? RE 5.5 lift-SYE-8.25-4.56-33x12.50 Strange hum rumble at 70 MPH coming from rear. Just had the gears done at a professional shop. Just had the driveshaft ballanced and new u-joint. They said everything else on it was tip top. And on the middle picture i noticed a gap...

A while back when i had to fix the fuel pump floater, i undid the bolts that hold it up in the unibody out. And the part that holds it up in there.....was gone. Instead there was a door hing spacer wedged in there to hold it up. Has anyone had to fix something like this. This is rediculous...

I have been experiencing some probs with my back up lights. When i put it in reverse the back up lights are not coming on all the time only sometimes. The tranny is engaging like normal so could this just be a wiring issue? I have a 97 with an AW4.:confused1

I was wondering if siera gears are any good? I have siera 4.56 in the rear and dana in the front. At about 70 mph i hear a rumbling noise (not violent) in the rear and kind of a humming sound. not smooth sounding. But when i take it back down to 65 the noise goes away for the most part. I just...

I was wondering when to replace the o2 sensors? Is there a specific milage? Ive got a 97 and never replaced them. I wonder if it will run more efficiantly with new ones in? just a thought.:eeks1:

I have a 97 AW4. I was just wondering if the 97 and 92 AW4 are the same length. Reason being is that i took the 231 out of the 92 and put it on my 97. I had the lift and t-case with the wack and tap SYE and custom driveshaft on the 92 and swapped everything over including the rear 8.25. So if...

What is the difference between getting your TB machined or putting a spacer on? Besides spacer making your TB touch the hood, what are the pros and cons and performance gains between the 2? :confused1

I have a 97 Xj with a over head console that tells me how many miles per gallon i get. How does it figure that? From the speedo gear in my t-case? Is it accurate? I know the best way is just to do the math on the trip meter but id still like to know where it gets its info from.:confused1

I have a 97 XJ and the temp gage says i am at around 195. That is insane since its like 105 and up around here in cali right now. I didnt believe it so i hooled it up to the drb at work and it was TRUE 195!! I also have a 92 but it seems to run hotter at around 210 and 220 in the same heat. I...

Just had my rear 8.25 re-geared to 4.56. I took it off, sent it in, got it back, put it back in. Drove down the road and at about 45 or 50 started to feel some vibration coming from what feels like my driveshaft. But i have a SYE kit on it so i dont know why it would be my driveshaft. A friend...

I have been eyeballing the jeepers creepers throttle body and was wondering if i have to change my spark gap, plugs, wires etc. I live in Cali and wonder if it will pass smog? :greensmok