Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Hey Man,
Can you get a cat from Jeg's or Summit parts. They have replacement cats for a high performance set-up and they run around $150.00, and they reduce
back pressure and increase flow.
www.Jegs.com
Replace the O2 senser with a resister the value you need for the correct running value and...
I am wondering also the degree of shim to put in the rear with a 3" lift on a 44 rear.
It is a '87 Limited
I am looking for the rest of the set-up using Dakota leafs, on rear and F-150
front springs.
Thank you Guys,
WVridgerunner
Hey Man,
I was in the fix for the injector swap, got the injectors from E-bay and they were junk. Just MY luck to get #$%^&*. \
Put in the old ones with a new O-Ring kit from ADVANCED AUTO the o-rings cost me $11.00 for the set.
I didn't like the 5.0 set took them out and in the box on the...
Tom,
Thank you for the info, I'll get some today.
I was told the injectors could have stuck "OPEN", have you heard of that?
I have two other injectors from the buy off E-Bay, Thats cool, I only have $33.50 in the whole injector set. So the headache is not so bad.
I am changing the others out...
Used injectors YES
New Plugs and wires
Haven't changed injectors YET
No chance of crossing the wires, Tagged the injectors
Ran down Vacuum Hoses Correct
I had figured the injectors have some old gas in the injectors dried
I will change them and get back to all Tues. Nite
Tom, what is BG44k and...
Hey Bro's,
Happy New Year and hope ALL had a Good Chirstmas too.
I have just replaced the injectors with a set from a Mustang #19 lbs,
I also changed the timing chain but put the old in just as the old one was, mark to mark, now my problems are that it is missing on two cylinders,#3 and #6. The...
I was replacing the o-rings in my 87XJ and I went to the Jeep dealer and they said that the BROWN o-rings are the same for the top and the bottoms of the injectors, the old kits were two colors and they changed to Brown o-rings and they are all the same and Will fit both the tops and bottoms.
I...
Hey Bro'
I just got the #19 lb mustang injectors from e-bay and got them all and O-rings sent to my door for 32.50 total.
Go to e-bay to the motor parts , go to the Mustang section , look for Fuel Injection parts and you are there. I bid on three sets and got one for me and one for a Bro' I...
I have a 87 and the cooling system has turned to a replace and repair all in the area of the repair, new rad.,therm.,water pump,timing chain and seal (had a oil leak).
If in the area work it all over, at least make it burn when they P***.
Just the OLD DOG in me!!!!!!
I have a 87 and have 30x9.50 Mich on stock rims and have had 500lbs of concrete in the rear and had no rubs in rear, just had to move the steering stops a few turns to keep the front happy.
--------------------------------------------------------------------------------
I am a new member of this site. I have a 87 XJ and have put a new TPS on, I "eyeballed" the placement of the old unit. I don't have the preformance that should be there, no overdrive when on the road, but when you...
I am a new member of this site. I have a 87 XJ and have put a new TPS on, I "eyeballed" the placement of the old unit. I don't have the preformance that should be there, no overdrive when on the road, but when you slow down at a coast it changes to OD.
My question is what is the procedure to...