Search results

hey guys, Im starting on the cooling system, with my project. Its got a rebuilt chevy 350 in it. I have a 160 t stat, electric cooling fans, and Im wondering what radiator I should use. I'll probably do some hood vents also to help with overheating. I have heard novak adapters, but I can't...

hey guys, anyone have any experience with what headers to use for a small block in a comanche? or maybe even an older cherokee? I am using the advanced adapters motor mounts. I just tried a set from summit, they are block huggers and exit straight down, but their is not enough room for them...

hey guys, I need to order driveshafts soon and I am curious to learn about how yokes are measured. I always hear numbers like 1410, 1350 and so on but don't really know what it means. I have 3/4 ton chevy axles under my jeep and an np 205 t case. just wondering how it works. also I was...

its time to move on, so this has got to go. 1997 jeep cherokee sport 4x4 148k, green exterior, gray cloth interior 4.0L, auto, np231 d30 front, 8.25 rear (4.56 gears) RE 5.5 inch lift with longarms BFG mud terrains set of 5, 33x12.5x15 mounted to Black steel wheels (soft...

had a few good ones, thought Id share here I am at turtle ridge orv park on drummond island . . . . . . . . . . . .. . . . . . . . . . . . with the wrong vehicle and heres some fun at the shop last night, back to backs. I needed to hook the strap lower on the quad I was just pullin...

whatcha guys think? I used 2x4x1/4, and 3/16" for the boxes, 2" reciever hitch and 2 weld on tow points, all in all took about 3 nights of work. I'm pretty happy with it.

Hey guys, Im looking to get a new steering box for my project, I am leaning towards the psc box, becuase Ive heard a few bad things about agr. I will be turning 38's in the mud and on tight trails. no rocks. also 90% offroad 10% on. I would like to set it up for hydro assist when funds...

hey guys, I just got a new project, and I'm working on the steering right now, Im trying to decide what the best way to go with it is, It's a comanche on 38's, its going to be a trail truck mostly, but sometimes driven on the street. I'm doing high steer on the front, and need to get the...

Just went to discount tire today to see how much some new 35's to fit my new axles were gonna be, and I got a reality check. Due to the extremely large disk brakes I have, I need to run a 17" rim. Also, it needs to be a 6x5.5 chevy bolt pattern, with a huge center bore so the rim will fit...

Alright, I know this is gonna be a longshot but I figured I mine as well try. I need some 35x12.5x17 tires and wheels, I would like a set of 5 with rims (any kind) but would settle for 4. Needs to be chevy 6 lug (6 x 5.5) with about 4.5 to 5 inch backspacing. I would really like some bfg...

whats up guys, Im about to get myself into a dana 44 swap front and rear, and was wondering about the brakes. They have discs all around, and from what it looks like, the hard lines on the axles will bolt right up to the stock cherokee brakes, Ive still got the stock master cylinder, but I do...

Ive been looking at doing a full internal cage, and was looking at the rockhard kit, but its a bit pricey for me, what other option are there, I can weld but I really like the bolt together one, I am looking at stiffening up the unibody cause I want to put the streetbeatcustoms ragtop on. I...

Ive been looking at compressors to power 2 arb lockers and possibly inflate a tire occasionally. these are the 2 I am looking at...

Whats up guys, Ive got some questions about wheel sizing, spacing and the affects of certain backspacing. heres whats happening, I've got some built dana 44's with a wms of about 65 inches, stock axles are like 61 1/2 or something, so I'll be about 2 inches wider on each side than stock, I...

Im looking at air compressors to power my new arbs, and Im kind of at a loss, I would like to be able to operate the front and rear lockers seperately, and I would like the compressor to be somewhat quiet while driving, (so mounted under the hood). Im looking at these two: 1)...

Like it says i need a rear hatch, I got rear ended the other day and its pretty banged up, and is stuck shut, does anyone have a 97+ rear hatch in green? or maybe know of a junkyard that might have one? All the junkyards around hear are all older model xj's. let me know what ya got.

I've got a set of stock alloy wheels and tires off of my jeep, I no longer need them and they have been sitting around for way too long. Tires are Cooper cobra's size 225-70R15 (I think) set of 4 with a fullsize spare on a black steel rim. Tires are white walls, and still have about 40-50%...

so basically my steering is shot, I need new steering. I was going to get the rugged ridge/ omix ada kit. but they are backordered for a while, and I wasn't too happy with their service anyway, so I am thinking of building my own. I have heard a lot of guys use chevy 1 ton tie rod ends. In...

what are some good vehicles to pull a set of 60's from? I have been lookin for the the 70's ford trucks, but It is pretty difficult to find an f350 that old from around here. seen a few 3/4 tons, but I want to run a 60 front. Im planning on buying a complete truck, and grabbing the axles...

decided to get down their one more time before it gets too cold, ended up being a really nice day, it wasn't too muddy down their, so we just rode the trails and had some fun, brought a quad, bike, and my cherokee, and my buddies 87 yj. heres the pics. first stop of the day, mcdonalds...