Search results

Fall Crawl is next weekend and my XJ has 2 broken front shafts. Anyone have some spare TJ shafts they could part with?

Whatcha got?

I am looking for a feed fuel line from a 4.0L H.O., OBD 1 XJ from the fuel rail to the fuel filter. This in the larger diameter of the two lines. It must have a good connector that hooks to the fuel rail.

I am curently running RE 3" front coils with a spaced and want to ditch them for full 4.5 coils. Whatcha got?

Coils out of an 88, have 124K on them. Gas tank is out of an 87, some rust but didn't leak. Axle is out of an 88 124K, new pinion yoke, 3.55 gears and no brakes. I will throw in some old drums. Come get it with A Lg. Reg. Dunkins ice coffee and I will help you load it. All parts are pick up only.

I am looking for an AX-15 for my 87 2WD Comanche project. Anyone have one taking up space in there shed/garage?

I purchased this for a project I was building but never finished. It was painted and installed but never saw use. My new XJ project has a 4.5" lift and this track bar is just too long. This track bar is BEEFY! It is made to be used with TNT's track bar bracket or you could fab something...

I am replacing the exhaust on my 1988 XJ and need to replace the two nuts that secure the down pipe to the studs on the exhaust manifold. Anyone know what size threads they are?

My XJ is currently sitting at about 4.5" of lift. I know someone selling a nice set of JKS Quicker Disconnects really cheap but I went to the JKS website and they say they fit an XJ with 2-3.5" of lift. Is anyone running these disconnects with more than 3.5" of lift. I don't really see any issue...

I have a 1988 XJ, 4.0L/AW4 that will not turn over. It used to do this every once in a while where you would turn the key and nothing would happen but you would try agin and it would start. Well, recently I swapped out the transmission and forgot to unhook the battery and tapped the starter...

Pulled from a running and driving 88 XJ about 4 years ago. Has been in storage since. $100 Located in Chester, NH.

I am swapping out the tranny on my 88 XJ and am having second thoughts on reusing the old torque converter. Does anyone local have a converter that came out of a drivable vehicle or at least one that is know to be good? The tranny is out and needs to go back in this weekend.

This is going to sound totally noobish but today I was replacing the stock arms on my new XJ project with the a set of fixed LCA I had from my old XJ when I ran into a snag. The LCAs have a slight bend with a long side and a short side. I can't for the life of me remember which way they go in...

I am thinking of selling my YJ D44. It is complete drum to drum out of a Metric ton MJ. Has decent brakes (w/new hardware) and just had the oil changed. 3.07 gears, 5x4.5 bolt pattern and set up for spring under. Looking to get $300 which is the original price I paid before I set it up for a YJ...

I recently picked up a 1988 XJ. The P.O.'s 18 year old daughter was beating on it doing neutral drops and blew the rear axle pinion. Well, the pinion has been replaced and now the tranny is slipping. It only slips badly in D but can be driven by manually shifting the tranny. I am going to do a...

I am in the process of doing a SYE on my NP231 and have run into a problem. After swapping the main shafts and reassembling the internal workings of the t-case everything spins nicely then click the shaft drops down maybe .050 and the chain rubs the syncro sleeve. The chain is tight and the pin...

I just scored a D44 front axle for my MJ. I am planning on installing it and retaining my coil spring front end. I pretty much know what is involved in the swap but I am just looking for articles from people who have done this swap already and retained the coil spring front suspension. I did...

I am looking for the header panel with everything that goes on it.

Anybody have a link to TNT Customs website(if they have one)? I have searched over and over with no luck.

Today I will be picking up my new project. It's a 1988 MJ long bed, 4.0L, AX5, D30/D35. It is in pretty good shape a little rot over the rear wheel wells and one small hole on the rocker under the door but that is pretty much it. I will be useing some of the suspension out of my old XJ and doing...