Recent content by txlen

i have a idea i did on mine..i used the fan off the dodge viper and it works great!!..it'a alot thinner than the ford fan too....

ok..so you want to sell the complete D35 rearend with 4.56 in it...gears and all, and an open diff D30 with 4.56 in it is that what you are saying????..Len

the check valve helps purge air out of the system...the reason you were not seeing a reading on the gauges was that the sending unit wasn't touching coolant...so it gets an inaccurate reading...so thats why you need to make sure and get all the air outta the system..Len

ok...ok..i'm full of hot air...i have 31/12.50X15's on my rig on 10inch wide rims....i run 22psi in the front and 20psi in the rear...how i do my setups is wet a spot on the paved or concrete road..drive thru it slowly onto the dry...look at how much patch is touching the ground...lower it down...

ok..here's a thought for you...does it get hot sitting still after you first start it in the morning??...1st check the fan clutch, is it moving air??...do you hear the fan whirring and pulling air????, then grab the upper radiator hose..is it hot??..and touch the lower..is it cool or alot cooler...

ok..ok..i'm waiting....

what year did this come out of????..i have a 97 will this fit it and will you ship it to texas??...i'm interested in the front to...are you gonna sell the carrier and the gears for the front too??..Len

is this the dana 30 front axle??....will it fit in the front of a 96???...Len

lets see...i'm a viper mechanic for a living...i installed a fan setup off a viper to see how it would work and fit.....seeing it keeps a viper cool..i figured a 4.0 was no big deal...when it sat in the stall at work with the a/c on no probs at all..ran around 170-180 degrees....idled there for...

i tried using the electric fan set up...it worked fine in stop and go traffic...but when i got on the hwy it started heating up real quick!!..it never ran that hot before!!!!...put the stock stuff back on....no more over-heating..can anyone answer that for me????....Len

do you still have this stuff??...whats shipping to 78148???...Len

i traced it down to the trans controller thats hidden below the glove box...the terminals were loose!!...i disconnected the batt and pulled off the plug and squeezed the terminals tighter...peinstalled and viola!!!....it works perfectly!!!...i'm a mechanic here at the local dodge dealership and...

ok...i'll go check....

lol..sorry...didn't get your p/m..lol..where do i get that at???....i do have yahooo mess or aol mess...my name is txlen on yahoo.. and salen1 on aol.....or e-mail me at [email protected]???...Len

cool..!!..do ya take paypal or what do i need to do to get them??.......Len