• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by Skeetdog

  1. S

    242 Hd Sye?

    I have the said Tom Woods SYE and had no problems with it until now. Unfortunately it has started to leak and I need to fix it. I purchased it in 2/05 and received it on 5/05, yes it was backordered. Fast forward to today and I just called and let them know that it is leaking badly 3 years...
  2. S

    ghee

  3. S

    Willy's flat fender Cherokee?

    Click Free
  4. S

    "Help with Daylighters"

    I have them wired directly to my battery. They power on fine, but the yellow wire and red wire to the lights get extremely hot after about 2 min. They cool down just as quick. I called KC and they told me to ground them directly to the negtive terminal of the battery, was grounded to the inner...
  5. S

    Steering Box

    I installed a steering box in my XJ and now the power steering pump is making noise. The pump had no issues before the install. Anyone have any ideas what may be wrong and what I can do to solve this problem besides installing a new pump. Could the new steering box (remanufactured) not be...
  6. S

    "Capacity Problem Relating to the Cooling System"

    I did a search and found this. What exactly is a "Capacity problem? What repairs need to be done? When driving during the day with temps 90* and above temp gets up to 240*. I turn on the heat on high and the temp drops to 210*. In the evening with a/c on temp stays at 210* to 220* which has...
  7. S

    "Full Traction Lower Control Arm"

    Thanks for the replies.....I probably go at it after work tomorrow.
  8. S

    "Full Traction Lower Control Arm"

    Its less then a 1/4", its very little. I tried the mallette, no go.. More input please, first install bare with me. Thanks again.
  9. S

    "Full Traction Lower Control Arm"

    Anyone have the 6" long arm lift? My lower control arm won't fit into the bracket. I was wondering what you all did if you ran into this dilema. Any input would be appreciated. I was going to use the dremel and take it down some but, thought I would ask for some input first. Thanks In...
Back
Top