• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by puhupski

  1. P

    Broken door-hinge welds: cheap n easy fix!

    Thanks for the thread! I use my XJ for fishing trips, and winter driving. I just got in on the road for the winter here in Minnesota after not having driven it all summer, and noticed the sagging door that I had forgotten about. Now that I think about it, I remember when it is -30F here...
  2. P

    Did I get bad shocks ??????

    I just installed Rancho 5000's all around, on a Rusty's 3" AAL. The ride is really rough, and the improvement on washboard seems minimal over those supplied by Rusty's years ago. Yes, they are properly installed. I just expected them to be more responsive. IMHO, they are really only good at...
  3. P

    Removing rear shocks on a 99 XJ

    All 4 of mine broke off. After trying to drill, extract, re-tap, and all that tedious stuff, I used the air hammer to knock off the captive nuts method--it worked great! It took me maybe one minute to blast off all 4 nuts. Used new 10-9 bolts, nuts and washers, very easy. I bought the air...
  4. P

    Front Triangle window replacement

    I just had the exact same thing happen, on a 94. Did you find out any information anywhere? I realize your post is quite old, I hope you got it resolved inexpensively.
  5. P

    Who has the highest Miles on an OEM 4.0L...no head/cylinder work.

    260k on 1994! no engine, tranny, or transfer case work except rear seal on tc. bought it with 242k on it!!!!!!!!!
  6. P

    Things that go 'pop' in the night...

    Have the same problem on 94 4WD, changed both front driveshafts (U-joints on both sides were loose), L and R hub assemblies (both were loose), L and R upper and lower ball joints (some were worn), checked all other joints, on stands and off, no slop visible, checked all bolts, all seemed tight...
  7. P

    progressively weaker starting

    Thanks for the input, it is very much appreciated. When you speak of a draw from the battery, what would really be happening would presumably be a drain from the battery, hence the progressively weaker starts and eventually no start, due to a drop in voltage and a resultant loss in current...
  8. P

    progressively weaker starting

    Greetings, new member here. Have been reading the forum for some time trying to get rid of DW. Recently, I've found that I get weaker and weaker starting, until the starter won't even turn at all, and the solenoid doesn't click. I had the battery tested, it was not too bad, but I bought a new...
Back
Top