Recent content by marsajo

do you have the rear seat belts with Gray webbing, if you do tell me how much w/shipping to zip 49408Thanks JM

Sorry, but never weld caps in place unless it an emergency. You will need to service them at some point down the road. I would call the place you bought them from, and ask them which ones to use.

do you have the rear seat belts? if the webing is gray I'll take them. Let me know [email protected] Thanks Joe

After looking at the pics what Kejtar said is right I used a small hose clamp to go around the e-brake cable's retainer to hold all the fingers in and hanked them out. Did you get the new hose for the D35 or the D44 the only difference is how they bolt to the axle tube. the D35 has a bango bolt...

Sorry I can't open the pic it says it is a forbidden file? My email is [email protected]

Got it. I used my 99 e-brake cables and have no issues with them.

The only thing from my 99' that I could not use was the rubber line that the D35 used but, the yard I got the D44 from sent a complete unit so the old line was used. I had no issues with any part match up on your list except what I said above. do you have any pics of what you are seeing, to get...

I just put a D44 from a 87' into a 99' 2dr and it all went in great. What do you mean by different?

I use the amsoil, nano fiber, heave duty filter. The thing is built like a tank and it filters great.

Hey, I will give you $20.00 for the drivers’ side rear seat belt if the webbing is gray in color and in good shape or not stained.. Joe

I need a drivers rear sholder belt that fits a 99' two dr. I need it fast I'm going on a trip and my belt was cut from the rear seat latching post. Thanks for your help

Is the front waggy a easy bolt in for the d30?

I use Amsoil 0w-30 and only change it once a year! Thats oil and filter. costs about $56 for the yr.

4wd and Jeep Essentials both sell the spacers. ones $99.00 for a pair you'ii need 2 but not to bad.

After reading your post I went out and removed my drivers door using a Gear wrench with the bit adpt. in it. Was simple as pie. I will have to look into using the bolt trick for my drooping bottom hinge.