Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to the new NAXJA Forum!
If your password does not work, please use "Forgot your password?" link on the log-in page.
Please feel free to reach out to [email protected] if we can provide any assistance.
Cut the metal line right before the rubber/metal crimp with a small tubing cutter. Cut off the crimped section from the rubber line. Flare the end of metal line and use a fuel injection clamp, 14-16mm. No need to buy hose unless the hose is damaged, dry rotted, etc...
I really like the fuel...
It's 99.5 and lower.... It doesn't have any other mid year changes. Production date is 3/99.
You probably have a non-OEM O2 sensor and one that is not a direct fit bosch type, which is what I have. The 99 FSM vehicle side connector colors match your 98 and my 99.
There should be a slightly...
The chain is starting to slip under heavy load. The speedo sensor o-ring wasn't there when I bought the jeep and the fluid level was down to about 1/2 qt! The damage was done, so now I'm looking for a case. The yard is $100-$125... checking to see if anyone here wants to get rid of a decent...
Seeing that Chryco trannys are complete garbage, why would I trust them with fluid? The smoother the shifting= slipping= the more wear you put on the clutch bands = the faster your tranny will wear out. I would just do a drain and fill every year with DexIII/IV/V/VI or whatever # they are on...
Yeah, a big pipe wrench and stand on it. Some bouncing action might be required also- just make sure you don't land on anything sharp when you fall after it breaks loose.
Front hitch in nice shape. Includes front mounting bolts and spacers. $80
AJ's rock rails. Stanard type. Straight, no hits, but does have some rust. Need to be cleaned up and painted. $120
Pick up only- Located in Saratoga County, 12019