• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Recent content by Guzzi

  1. G

    Wet Crank Position Sensor

    Hi, At the time of posting I hadn't as I was waiting for everything to dry bit. So, of course I eventually grabbed the can of WD40, unscrewed the distributor cap and gave it a good squirt and left it hanging to dry/fume off. Went out an hour later and all OK. No matter how often this happens...
  2. G

    Wet Crank Position Sensor

    Hi, Finished cleaning the engine bay on my '96 XJ Sport. Had used a pressure sprayer to apply degreaser and rinsed of with low pressure water hose. Went to start Jeep and turns over fine but doesn't start. This has happened exactly the same way a few years ago and was the Crank Position Sensor...
  3. G

    Thermo Fan won't turn off

    Hi, Thanks to all for the great feedback suggestions. Took a punt and invested the princely sum of $12 in a new relay and it seems to have cured the problem. The old relay could be made to work by taking the cover off and un-sticking it but I believe that once it got hot from use/engine bay...
  4. G

    Thermo Fan won't turn off

    Hi, Sorry about the info. oversight! 1996 XJ 4.0 6cyl with 230,000kms Engine mods include Hi flow water pump and thermostat housing, ADRAD Radiator. Thanks for the reply, I will do the swap around this evening and will post findings. Guzzi
  5. G

    newer door speakers

    Hi, Just replaced mine with Kenwood 6" splits. The six inch speakers (round) fit in just fine with a little trim "trimming" and give much better bass response. Did not have to drill new mounting screw holes, screwed in just fine to the old holes with only a very slight angle to them. When...
  6. G

    Thermo Fan won't turn off

    Hi, All the threads I have looked at talk about the thermo (electric) fan not coming on. My problem is that it won't switch off. Happened once before and I walked away expecting it to shut off once it had cooled down enough, I had been having overheating problems but since solved by replacing...
  7. G

    Airlift air bag suspension assist installation

    Hi, Installed the Air Lift suspension kit over the weekend and very pleased with the results, It has lifted the back end back up to the standard ride height with minimum air pressure and will lift it about 1" higher if more air pressure is used (30psi). I believe it has improved the ride...
  8. G

    Airlift air bag suspension assist installation

    Hi, Thanks guys for the input much appreciated. I did undertake that act of last resort and got out the installation instructions for a closer look and they do indicate that they should be installed with the suspension adjusted back to the "factory" ride height. So, they aren't primarily...
  9. G

    Airlift air bag suspension assist installation

    Hi, Does anyone have experience installing these? I have a 96 Sport with the standard UpCountry suspension which was fine until it sagged (1") and the shocks faded. I have fitted Rancho RSX's all round, a great ride improvement especially on twisty tarmac. I do not want to lift the...
Back
Top