Recent content by damngreenxj

Oh yeah, I found this (someone posted on another forum) cheapest HD SYE I have seen around http://www.performanceoffroadcenter.com/oscommerce/product_info.php?products_id=153

well if that is the case, and it is right there at the end of the case, then these parts would also change during an SYE install yes? I would love to do the SYE, but the only place for a drive shaft that has been recommended was Tom Woods... but they are expensive as hell... Any chance anyone...

Is this an easy thing to change? I have been checking randomly and often and the fluid level doesn't seem to be too affected by it, but I am sure you can understand I do not want that... This whole change has been one major problem after another... I am about ready to flip out! But at least i am...

Well, that is one hell of an answer... I am going to get the donor vehicles parts for the Tcase, so that should be fine... But for the moment I have a bigger problem. The case is spraying fluid up into the underside of the truck and leaking onto my exhaust... NOT A GOOD SMELL! I imagine at some...

I grenaded the 242, which is what I drove 250 miles with in 4 wheel. I will see if I can get the level from the donor... not sure if it's still there. the pinion is what went in truck along with the TC... gotta fix it still

Not at all. It came out of a 98 XJ. I got the TC for $150, so in all honesty how can i go wrong? It is doing some weird things that I definitely have to figure out, like where the hell 4 low and neutral went! But I will get it sorted out. Any of you guys have these problems at all? Or any...

the truck survived... well for the most part. The pinion bearings went in the front axle. It's on the list ;) Other than that everything else seems fine. Thanks for the heads up on the shift pattern. So now I know I can only get into 4 hi, and not the rest... That doesn't sound like a fun...

I have one I have yet to install... It is as simple as a lead and ground. I have a two wire that needs to be grounded. One wire (black or red) to a 12 V source. Cig lighter, open jumper (stick a fuse in) and go straight to the fuse block. As for install, if your hole is tight enough than you...

biggest waste of $ on the XJ... I would have to say ANYTHING i bought from Pep boys. Too many fights with them about how they believe my Dana 30 is a Dana 44, and my Chrysler 8.25 is a Dana 35... BS no named roof rack. Pretty sure it was a JCW cheapy. Save yourself the time and trouble, get...

Hey guys, just an update. I did the swap and all worked out... kind of. I am getting some funky noises I have to get to the bottom of, I will get around to it. The 242 markings on the case were said (by the dealer) that they have absolutely no ideas what that was about. They would like to say...

Yes I just read that now... Thanks for the heads up, it would have been great to know before I did it though :) I feel like a tard, took me an hour and a half longer. Thanks for the reply !!!! Once again, thank you everyone for your help

I just did this yesterday as well... Yes it does sum it up, it would have been a lot better to read this first... Although i used a 14 MM ratchet wrench for the whole job... worked out fine. Should have taken an hour? It took me two 1/2... and I only found 5 bolts until i was ready to take it...

OK, after an extensive call with the dealer, who still cannot figure out what the sticker marking my T-case means, It is a 242. Sorry for being dumb guys.Hasta The dealer also said that it "should" be interchangable as well. But he is telling me from a computer aspect only looking at codes and...

My case was marked with a sticker that reads clearly NV232J... I did a lot of research on this and couldn't find this number anywhere. When it comes to jeep I am no moron, I do all my own work and have been through that truck time and again for just about everything. The only thing I haven't...

Hey guys, First thing is first. I have a 1999 Jeep cherokee Spor 6cyl 4.0. I just recently tore apart my front axle and transfer case all in one day... Yeah i know... The real question is. I just found out I have a NP232 under neath her, Could I swap that out for a NP231 with minimal to no...