Recent content by AtomicPunk

I was thinking of doing 4.27 in the front but I figured if I could use the rear gears it would save quite a bit of money since the rodeos are all over the wrecking yards here in Arizona with the 4.30 gears. Do you think running 4.27 in the front would cause a problem in 4 wheel drive on a...

Ok, i'm about to do an axle swap, in the rear I'll have an Isuzu rodeo Dana 44 with the 4.30 thick gears (93-97) and the high gear carrier, it's the stock set up. In the front it will be an 86'+ wagoneer dana 44 and I want the matching 4.30 gears. Randy's ring and pinion doesn't seem to sell...

So I've been reading reviews and what not and decided I want to go with the Polk Audio db5251 component speakers, check em' out, http://www.buy.com/prod/polk-audio-db5251-5-1-4-component-system/q/sellerid/18756548/loc/111/204254735.html Anyways, I've looked around on the tweeter location and...

I need a new seat bracket for my XJ, not a seat, just a bracket. So If i got a ZJ bracket can I bolt my XJ seat to it without any modding than bolt it onto my floorboard? And these are manual seats not power, thanks. Also, do any of the power lock actuators work in the 97+ xj from the zjs?

It's a front narrow track wagoneer axle. What i want to know is, what do i have to do exactly to make this fit? I KNOW THERE ARE POSTS ON THIS!!!! But I've found too much conflicting info and i want to know how to do it right. I have a 98' xj with a 5.5 inch rubicon express lift on 33's. I plan...

NO! I've been having overheating issues with my cherokee and finally went to radiatorbarn.com and ordered their 3 core brass one for $190 shipped. I also threw in one of those heavy duty fan clutches from napa from a 97 zj with an inline 6. I now drive on the freeway in phoenix arizona with my...

Ok, I've got a 98 cherokee with a 5.5 inch life. I've started having this problem ever since I put steel bumpers on the jeep. Everytime somebody does something stupid like cuts me off or slows down to 30 in a 45, the rpms jump up and the jeep will accelerate to about 6 inches off their rear...

Before I replaced my o2 sensors, i had ran with them unplugged so i had the O2 sensor codes. When I replaced them the O2 code stayed on. I unplugged the battery for 30 seconds and turned it back on which eliminated the check engine light. My theory was that if anything actually did go wrong the...

OK, replaced the O2 sensors and cleaned out the throttle body. Problem has yet to persist and jeep feels MUCH more responsive. :cheers:

Any results yet?

I gotta wonder, and hear me out, has anybody who's had my problem checked their brakes? My front left brake pad is worn down to the metal, I can hear it grinding while I drive (I'm fixing it this weekend I don't have the money yet). I was just wondering if it was even possible that at some...

Ok, I really don't think it's the Transmission/Torque Converter and I'll tell you why, the symptoms I'm having are described exactly in this thread from cherokee forum http://www.cherokeeforum.com/f2/hesitation-bucking-acceleration-12458/ . Now she drives a 5 speed manual, and is having the same...

Re: Ok this is weird.. new info Ok, it appears I was wrong on my original post. I was driving today on the freeway and the RPM actually jumped, not dropped. It still make the clicking sound, once per jump, but it only jumped once so it's like one click, not several. I did find out that the...

It gets into fourth gear fine, but I don't think it's the transmission. If I gas it and go up tor 4500 RPMs from start it shifts fine, and if I drive normally it also shifts fine. If I crawl up to 70 at 2500 RPMs it will do it and if i gun it up to 70 at 3500-4500 RPMs it will do it. It seems...

It's got 34 inch tires and3.54 gears. And yes, the tranny cable has been adjusted.