Recent content by 4linkedXJ

Thats the way a three link is setup. Thats a pretty intuitive design though.

Thanks for the input though. Alot of time was put into the setup on the front of the XJ.

Pics will keep going along with the build, will probably be a month before I'm done. Have to finish the ranger I'm building aswell.

The left upper arm is pre bent to clear the diff upon up travel. and from just the ride in the parking lot to make algnment adjustments it rides quite nice. Unconvential yes, but it works. The lower links are from teraflexs xj longarm kit. Specs on the jeep are d44 in the rear with 4.88s and ox...

Sorry for not saying that it is still being finished up. That steering was on before the 4link and so I left it on to be able to move it around the shop. It's getting either a howe setup or an agr setup. Leaning towards the Howe setup. The pinion angle change is very minimal aswell. If there was...

Yep thats right all the lengths are horrible and itll never work. Or your wrong. It cycles very well, the bracket is from teraflex and the ubolts are just used to hold it in position for mocking up. Of coure its going to be welded it has not even left the shop yet. By the way the upper link kit...

Well I have been working on using a 4link teralflex from a wrangler and this is what I came up with. Welder was acting up when I did those.

Anyone put a triangulated four link on the front of an XJ? To be able to delete the trac bar.