Cross member for an XJ with a crawl box/doubler?

6

600dollarxj

NAXJA Forum User

Location

Dayton Oh/Purdue

• Feb 7, 2008

• #1

If you were running a 231/231 crawl box and transfer case combo wouldn't you want something supporting the transfer case? It would be hanging out there pretty far off the transmission.

If anyone has pictures of this setup do you want to post them up?

 

3

3XJFamily

NAXJA Forum User

Location

Austin TX

• Feb 7, 2008

• #2

Check out these threads on a buddy's MJ with a doubler and long arms - TNT did a custom belly pan for him. . .

http://www.austinjeepclub.proboards46.com/index.cgi?board=tech&action=display&thread=1165380865

http://www.austinjeepclub.proboards46.com/index.cgi?board=tech&action=display&thread=1167965999

 

R

redneck23ms

NAXJA Forum User

Location

fort collins co

• Feb 7, 2008

• #3

gotta register on that site to see the threads

 

3

3XJFamily

NAXJA Forum User

Location

Austin TX

• Feb 7, 2008

• #4

redneck23ms said:

gotta register on that site to see the threads

Click to expand...

Sorry - that's new. Wasn't my intent to make anyone register. The guy is "Reason46" on both boards I'll see if I can get him to post here too. He does some sweet fab work.

 

6

600dollarxj

NAXJA Forum User

Location

Dayton Oh/Purdue

• Feb 7, 2008

• #5

I registered to see them, it was a good idea. He made a bracket that used a 3 of the 6 bolts that hold the transfer case to the crawl box. Then it also mounted to a crossmember using a rubber bushing.