atreyuBLUEXJ
NAXJA Forum User
- Location
- Richmond Virginia
i have a 5.5 inch lift. i wanna add either an inch or 2 to it. will i need new uppers and lowers? its rubicon
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
do i need new control arms?
- Thread starter atreyuBLUEXJ
- Start date
jonboy
NAXJA Forum User
- Location
- beside myself
I dunno, wha'cha got?
You should at least have adjustable uppers
http://www.yuccaman.com/jeep/re_db.html
scroll down to the bottom of the page to see guidelines on CA lengths - not perfect, but ok as starting point and you'll need to tweak from there to get caster issues sorted out
You should at least have adjustable uppers
http://www.yuccaman.com/jeep/re_db.html
scroll down to the bottom of the page to see guidelines on CA lengths - not perfect, but ok as starting point and you'll need to tweak from there to get caster issues sorted out
tealcherokee
NAXJA Forum User
- Location
- CT
.........
you
NEED
longarms
you
NEED
longarms
madmechanic
NAXJA Forum User
- Location
- new jersey
your going to need adlustable upper and lower arms so you can correct your pinion angle , caster and to set your wheelbase.
- Location
- Lafayette, CA
He doesnt need them.......tealcherokee said:
It will ride like crap, but it will work with adjustable uppers. Or use drop brackets.
But long arms would be much better.