- Location
- REDLANDS, CA. (SoCal)
Long arms is not the answer I'm looking for.
I ripped off a lower control arm bracket so I'm in the process of plating the front of my frame rails both inside and out with 3/16. The face of the frame is 1/4". Although long arms may happen one day I've wanted to try drop brackets so now is my opportunity.
My replacement upper brackets are made and will be positioned 4" lower and 3/8" forward. For the lower mounts I am reusing the factory adjusters for camber.
These are not bolt on and all factory mounts have been removed. Control arms are all RE flex adjustable.
I ripped off a lower control arm bracket so I'm in the process of plating the front of my frame rails both inside and out with 3/16. The face of the frame is 1/4". Although long arms may happen one day I've wanted to try drop brackets so now is my opportunity.
My replacement upper brackets are made and will be positioned 4" lower and 3/8" forward. For the lower mounts I am reusing the factory adjusters for camber.
These are not bolt on and all factory mounts have been removed. Control arms are all RE flex adjustable.
Last edited: