I'm really new to 4x4s, at least to owning one. I have brand new OME 2" (or something) springs on my 86 XJ, and didn't think I had any driveshaft vibrations. Now I'm unsure, however. Seems like there is a very fast vibration in the car when cruising around 100 km/h (about 60 mph), I don't know where it's coming from, but it feels like it's all around the car, in the floor, steering wheel, doors... not a strong vibration, not immediately noticeable but I can feel it, and don't like it... is it too little to damage/wear out anything, or should I look into it before it's too late?
Also, do you think this vibe (if it's coming from the shaft, I'm suspecting my gearbox mount as well, I think the steel touches sometimes, especially under forward torque) is due to driveshaft imbalance, or u-joint angles? I haven't checked the angles yet, but I got the shaft (and slip-yoke) from another car, which means the pinion yoke isn't balanced in relation to the driveshaft. I could try to turn the joint 180 degrees in the yoke, though... Or maybe I have bent my shaft, even just slightly? Does that happen easily, I noticed some screw-shaped scratches on the shaft, seems like I've touched something with it while driving...
All tips and opinions appreciated.
Also, do you think this vibe (if it's coming from the shaft, I'm suspecting my gearbox mount as well, I think the steel touches sometimes, especially under forward torque) is due to driveshaft imbalance, or u-joint angles? I haven't checked the angles yet, but I got the shaft (and slip-yoke) from another car, which means the pinion yoke isn't balanced in relation to the driveshaft. I could try to turn the joint 180 degrees in the yoke, though... Or maybe I have bent my shaft, even just slightly? Does that happen easily, I noticed some screw-shaped scratches on the shaft, seems like I've touched something with it while driving...
All tips and opinions appreciated.