NWFest, what needs to be done. [Archive] - NAXJA Forums -::- North American XJ Association

juniorXJ

January 26th, 2009, 15:56

okay so its that time of year again. time to start thinking about what needs to be done before NWFest. we think about these things now so we can have time to test them before hand. so here are my plans, not too big.

D44 rear, 4.88 locked and disks
D30 front, 4.88 locked
protofab front bumper
35" KM2s.

the list isnt too long. not including the random stuff to make it all work. so what are your plans prior to the most awsome wheelin' weekend i have a chance of making it too.

vortex

January 26th, 2009, 16:04

I cannot at NWFest Drive until next year so my list is a years worth...

-PJ-

Metal Thrasher

January 26th, 2009, 16:05

Front QuikLock install.
Rear 8.8" LS friction disc R&R
Permanent mount for Hi-Lift
Get CB properly tuned

Bunch of other things on the long list but those are the pre NWFest requirements.

Ba-Riedo

January 26th, 2009, 17:10

Tube doors
Touch up paint
New rear bumper
Tune CB
2 low kit is a possibility

-Alex

rooneypower

January 26th, 2009, 17:20

onboard air via A/C pump
repaint
possible 44 front (if deal doesn't fall through)
2 low kit
e brake
and other goodies i cant mention quite yet...:)

Keil

Ba-Riedo

January 26th, 2009, 17:27

onboard air via A/C pump
repaint
possible 44 front (if deal doesn't fall through)
2 low kit
e brake
and other goodies i cant mention quite yet...:)

Keil

Meow, make sure you add building my rear bumper to your list.:shhh:

-Alex

fourplayoffroad

January 26th, 2009, 17:48

D44 front ARB 5.13's trussed
ford 9" rear ARB 5.13's trussed and shaved
if tax return allows then i'll also be getting 37's or 38's
finish dovetail front
finish half doors
build new front and rear bumper's
hopefully a cage ( need tubing bender )
also if tax return allows i've been thinking about the teraflex 4:1 kit have any of you ran this or heard about it?

Bruno™

January 26th, 2009, 19:09

Front bumper
Winch(?)
Rear Bumper
Rear Locker(?)
And as Keil said, some thing(s) not be be said yet.

-Lyle

P.S. Keil, PM and we can swap secrets, ;) Haha.

Ba-Riedo

January 26th, 2009, 19:12

Front bumper
Winch(?)
Rear Bumper
Rear Locker(?)
And as Keil said, some thing(s) not be be said yet.

-Lyle

P.S. Keil, PM and we can swap secrets, ;) Haha.

So basically your gonna re empty your bank acct?:confused1

-Alex

Muddy Beast

January 26th, 2009, 19:13

Well if I sell my bike by then...

D30 E-locked with 4.55
8.8 detroit or auburn locked with 4.55 and disc brakes
Winch
Tophat roof rack
A little more lift and 33's

~Scott

P.S. Alex, expect him to have a way nicer rig by NWfest, including a cage. :)

Bruno™

January 26th, 2009, 19:18

So basically your gonna re empty your bank acct?:confused1

-Alex

Its empty? :D

-Lyle

Ba-Riedo

January 26th, 2009, 19:19

Its empty? :D

-Lyle

:laugh: Call and check, but when I went to make a withdrawal earlier with your card I got denied.:eyes:

-Alex

Bruno™

January 26th, 2009, 19:31

:laugh: Call and check, but when I went to make a withdrawal earlier with your card I got denied.:eyes:

-Alex

Damn, better start up my blackmarket operation again...

-Lyle

Bruno™

January 26th, 2009, 19:34

P.S. Alex, expect him to have a way nicer rig by NWfest, including a cage. :)

:sure:

-Lyle

Muddy Beast

January 26th, 2009, 19:46

:sure:

-Lyle

:shhh:

:yelclap:

NW-ZJ-SCOTT

January 26th, 2009, 19:57

Yank motor, replace gaskets/ Both manifolds/blow by system
Complete exhaust
Work done to my front bumper, extend the mounts back, weld in winch plate
Warn winch
33" KM2's
8.8
D30 w/aussie
-------------------------
Add tow receiver and Load leveler to Durango. find someone to barrow trailer

WaXJ_Skier

January 26th, 2009, 20:08

Rear Disc brakes
New Rig
Bumpers F/R
241OR Swap
Cage

XJourney

January 26th, 2009, 20:26

Change fluids
Gas
Pack

Ba-Riedo

January 26th, 2009, 20:31

Change fluids
Gas
Pack

:roflmao:Winner.

-Alex

Bruno™

January 26th, 2009, 21:43

Change fluids
Gas
Pack

Damn, cant compete with that...:laugh2:.
Not even a new air freshener scent? :D

-Lyle

WaXJ_Skier

January 26th, 2009, 21:45

Not even a new air freshener scent? :D

I think that was last years upgrade.

CanMan

January 26th, 2009, 21:49

Swap everything over to newish rig.
Make doors removeable.
Gas tank skid.
'Frame' stiffners.
Rocker replacements.
2 new tires.

OR

Just pack.

:greensmok

XJ_ranger

January 26th, 2009, 22:47

the "have" to:
add oil to transmission after last weekend. :laugh2:

maybe find a shop to swap out my empty CO2?

buy a bigger cooler?

the "might":
Boatsides
Winch Mount
Full Hydro
PRP Seats
Re-Valve rear shocks
install passenger side MORE motor mount
new front diff cover
new front tube work

I'll likely not do anything, and just add some gear oil the night before to the tranny. :D

Metal Thrasher

January 26th, 2009, 22:53

the "have" to:
add oil to transmission after last weekend. :laugh2:

I'll likely not do anything, and just add some gear oil the night before to the tranny. :D

We do hope to see you on a few runs before NW Fest. We should have a Mudfest in the Spring and possibly another snow run before it melts ( hopefully with new and better snow...).
But the cooler upgrade is defenitely advised.

Ba-Riedo

January 26th, 2009, 22:55

Yeah Opie and mud, that would work out well.

Opie and the Rockface at Walker = awesome.:D

-Alex

CanMan

January 26th, 2009, 22:57

Opie and the Wall at Reiter = awesome.:D

-Alex

Avanteone

January 26th, 2009, 22:59

I think my list is about the same as last year.....

Hook up trailer. Wash Jeep. Load Jeep.

:laugh:

I see lots of build plans and parts purchases coming up here, keep us in mind for anything you need, parts or installation. Competitive prices on everything and we support those who support us!

John
Auburn Car Repair & Offroad

Ba-Riedo

January 26th, 2009, 23:00

I think my list is about the same as last year.....

Hook up trailer. Wash Jeep. Load Jeep.

:laugh:

I see lots of build plans and parts purchases coming up there, keep us in mind for anything you need. Competitive prices on everything and we support those who support us!

John
Auburn Car Repair & Offroad
253-939-5019

Do I get a discount on 2low kits if I buy and have you install 2 of them John?

-Alex

Avanteone

January 26th, 2009, 23:01

Do I get a discount on 2low kits if I buy and have you install 2 of them John?

-Alex

Sure. PM or call me.

Ba-Riedo

January 26th, 2009, 23:04

Sure. PM or call me.

Pm inbound.

-Alex

goblazers_6

January 26th, 2009, 23:22

Rear bumper
Rocker Replacements/Sliders
Working Lights
Removable Doors

2xtreme

January 26th, 2009, 23:22

My List:
1. I need to patch 1 tire.
2. Sort out 1 "burping" tire.

Most likely:
1. re-paint black on door guards and rock sliders.

Hans, I believe you missed 1 minor "logistical" issue on your list ;)

Michael

TORX

January 27th, 2009, 00:17

I have a few things I need to do.

- Find a full size spare
- Install some 297 shafts (spares would be nice)
- Swap in a new gas tank
- Some random maintenance items (fluids, axle seals)

I have a longer more detailed list too, but that's more for a trip planned for the end of summer. :shhh:

IXNAYXJ

January 27th, 2009, 01:53

Source Staples Easy Button for my ARB.

Show Up.

-----Matt-----

XJCasper

January 27th, 2009, 01:54

Front bumper
Winch(?)
Rear Bumper
Rear Locker(?)
And as Keil said, some thing(s) not be be said yet.

-Lyle

P.S. Keil, PM and we can swap secrets, ;) Haha.

I like this list. It would clean my garage out.

XJourney

January 27th, 2009, 07:25

Hans, I believe you missed 1 minor "logistical" issue on your list ;)

Oh yea I forgot

1 Buy a Tow Rig that I can put my jeep on top of and still tow my travel trailer.

I don't think it is in this years budget.

Hans

fubar XJ

January 27th, 2009, 13:02

Well, I got a head-start by taking care of one item I'd been planning for a couple of months now. Per Goatman's thread in mod tech, I replaced the crappy factory linkage rod between the t-case tab and the fulcrum assembly. You know, that thin "Z" shaped piece of garbage that flexes under operation, bends the ends so you don't get full throw, and ruins the wimpy plastic inserts in the tab and fulcrum? Yeah, that's gone now. I picked up a few things between NAPA and Tacoma Screw to assemble a stout rod out of 3/8" heim-jointed female insert rod ends, a length of all-thread, a couple of jam-nuts, and a pair of 3/8" grade 5 bolts with metal crimped locking nuts.

Pretty simple if a little bit time-consuming. Removed both the t-case tab and fulcrum piece, welded the 7/16" bore/1/2" shoulder plastic insert holes shut and re-drilled them at 3/8", re-installed them in the Jeep, assembled the heim-joint ends and all-thread cut to length to match the factory piece's length with jam-nuts to ensure the length stays constant, assembled it in place with the grade 5 bolts and metal locking nuts. Now I have a firm shifting lever and t-case function seems solid. I'll need a couple of trail runs to confirm, but it should be good to go.

XJ_ranger

January 27th, 2009, 21:21

We do hope to see you on a few runs before NW Fest. We should have a Mudfest in the Spring and possibly another snow run before it melts ( hopefully with new and better snow...).
But the cooler upgrade is defenitely advised.

Yeah Opie and mud, that would work out well.

Opie and the Rockface at Walker = awesome.:D

-Alex

I'm not much of a mud guy, but I'd love to get out on another snow run

I'm not sure what Rockface at Walker and the wall at Reiter are, but I'll point my nose in there and give it the ol' college try... :dunno:

got any pics?

The cooler will likely be the first upgrade :thumbup:

squidd

January 27th, 2009, 22:48

Install my 8.8
find a 4.10 D30 and transfer my aussie into it and swap with current axle
a Winch

mojojojo

January 28th, 2009, 20:38

have to do:

1. new steering box
2. flip tie rod
3. fluids all the way around
4. stock up on spare parts
5. replace winch line
6. adjust trac bar

want to:

1. OBA
2. cage

if money magically falls from the sky...

1. D44 front - locked n geared
2. 35" shoes

Mc2KXJ

February 2nd, 2009, 17:28

New front springs
OBA
Rear bumper/airtank with lines
A way to mount a pony keg in the back and keep it cold

Other than that, I'm pretty damn good.

fubar XJ

February 3rd, 2009, 12:06

Oh yeah, OBA. Good call Rich. No reason I shouldn't do mine as well.

88manche

February 4th, 2009, 22:13

I wanna try and make it this year.

ACTUAL LIST
Air compressor
New tires (probably not)
Spare shafts F&R
Sort out weird engine noise
Fix DW so i can go 80 all the way there
Lockers, gears (probably not)
Pack and go.

WISH LIST
38'' TSLs
9''/44
gears
lockers
Go.

TORX

April 2nd, 2009, 23:11

Update:

- Find a full size spare (DONE)
- Install some 297 shafts (DONE)
- Swap in a new gas tank (DONE)
- Some random maintenance items (Mostly done)
- Install OBA (In progress)

Bonuses: winch, custom bumper, half doors, RS diff covers

NWF is less than 3 months away!

WaXJ_Skier

April 2nd, 2009, 23:15

Rear Disc brakes (This weekend?)
*new* Beadlocks (sometime in the next couple weeks)
New Rig
Bumpers F/R
241OR Swap
Cage

CanMan

April 2nd, 2009, 23:22

Swap everything over to newish rig.

:greensmok

Well... Well... Well...

Looks like the list did get bigger.

Engine
Removeable doors
Rocker replacements
'Frame stiffners'
Shackle boxes
New leaf packs
Gas tank, TC, trans skids
Assemble interior
2 new tires
Trans and PS coolers
Rear seat
Im sure there is more

Mc2KXJ

April 3rd, 2009, 09:42

Well... Well... Well...

Looks like the list did get bigger.

Engine
Removeable doors
Rocker replacements
'Frame stiffners'
Shackle boxes
New leaf packs
Gas tank, TC, trans skids
Assemble interior
2 new tires
Trans and PS coolers
Rear seat
Im sure there is more

Dayam! Now I don't feel so bad about my progress.

Avanteone

April 3rd, 2009, 09:55

CanMan

April 7th, 2009, 21:10

Well... Well... Well...

Looks like the list did get bigger.

Engine
Removeable doors -Got drivers rear done
Rocker replacements
'Frame stiffners'
Shackle boxes
New leaf packs
Gas tank, TC, trans skids
Assemble interior
2 new tires
Trans and PS coolers -Done
Rear Seat -Done
Im sure there is more Got some lights wired and other 'small' things done

XJ_ranger

April 8th, 2009, 11:15

the "have" to:
add oil to transmission after last weekend. :laugh2: - Done

maybe find a shop to swap out my empty CO2?

buy a bigger cooler? - still shopping :(

the "might":
Boatsides - ought to be done this afternoon
Winch Mount - done, waiting on winch parts
Full Hydro - steering box is leaking again... grrrr... still a maybe
PRP Seats - looking more likely.
Re-Valve rear shocks - not likely...
install passenger side MORE motor mount
new front diff cover
new front tube work - not going to happen

Added:
609 front - not even close...

Still need to figure out if I'm going to CalRocs or not...

Avanteone

May 4th, 2009, 20:57

I think my list is about the same as last year.....

Hook up trailer. Wash Jeep. Load Jeep.

OK, so change of plans.

Here's how my Jeep currently sits:

http://img.photobucket.com/albums/v637/Avanteone/SHOP%20WORK/SUBLIME%20PHASE%20II/IMG_9869.jpg

Upgrading rear axle from the built 8.8 to a HP RockJock Dana 60 with 5.13's, ARB, 35spline alloy shafts, cutting brakes, etc. I'll be done in plenty of time, though. Housing will be done this week, get gears and locker setup by the end of the weekend, and be bolting it in beginning of next week. Also ditching the rear TJ Coils and FOA shocks for Radflo 2.5" Airshocks.

John

Pathatten

May 4th, 2009, 21:15

Move 44,000 lbs of toys and houshold goods 3000 miles back to the PNW.

And no more of this.

http://i4.photobucket.com/albums/y109/pathatten/IMG_4663Custom.jpg

PAT

Muddy Beast

May 5th, 2009, 07:29

Well if I sell my bike by then...

D30 E-locked with 4.88 (sitting in garage prepped for paint)
8.8 LSD with 4.88 and disc brakes (sitting in garage prepped for paint)
Winch (not for awhile)
Tophat roof rack (maybe for my birthday this month)
A little more lift and 32's (RE 4.5 kit on, 32's mounted and balanced waiting for axles)

~Scott

:cheers:

2xtreme

May 5th, 2009, 08:26

And no more of this.

http://i4.photobucket.com/albums/y109/pathatten/IMG_4663Custom.jpg

PAT

Pat,
I think you have some explaining to do :chef: (I assume there were nomes involved?)
Talk!!

We look forward to having you back on the left coast!!
Michael

mojojojo

May 5th, 2009, 19:12

have to do:

1. new steering box (might get to it?)
2. flip tie rod (might get to it?)
3. fluids all the way around (done, gonna need it again i'm sure. its a jeep, lol)
4. stock up on spare parts (spare shafts with big joints - Done!)
5. replace winch line (still hasn't broke yet)
6. adjust trac bar (Done!)

want to:

1. OBA (done)
2. cage (ha ha yeah, right $$$)

if money magically falls from the sky...
(still doing the rain dance, hiya hey, hiya hey. . . .)

1. D44 front - locked n geared
2. 35" shoes

squidd

May 8th, 2009, 02:24

Heres where I sit now. Not sure if I am going to make it.

Needs to be done:
1) install long arm upgrade (fedex delivers day after tomorrow!!)
2) install double shear track bar. (same as above)
3) install shocks (same as abovez)
4) install adjustable bump stops (sitting in the box waiting for the lift)
5) ramp and trim fenders (waiting for all of the above)
6) buy front and rear master install kits
7) install the 4.88 gears in the D30 and the 8.8 (front gears in a box on my computer, rear in the mail, D30 3.73 up carrier and 8.8 notched cross shaft in a box next to the gears)

Done:
35" "shoes" installed
5.5" RE springs installed
ZJ tie rod installed
8.8 installed
ZJ prop valve installed

Seems to get longer the closer we get!!
Anyone goign to have an open seat if I don't make it? :dunce:

CanMan

May 10th, 2009, 11:48

Engine-This coming weekend
Removeable doors-Done
Rocker replacements-Hopefully next week
'Frame stiffners'-Prob not happening
Shackle boxes-Hopefully this week
New leaf packs-Hopefully this week
Gas tank, TC, trans skids-TC skid done
Assemble interior-Done
2 new tires-Hopefully next week
Trans and PS coolers-Done
Rear seat-Done
Im sure there is more

squidd

May 10th, 2009, 19:25

Long QUOTE]1) install long arm upgrade (fedex delivers day after tomorrow!!)
2) install double shear track bar. (same as above)
3) install shocks (same as abovez)
4) install adjustable bump stops (sitting in the box waiting for the lift)
5) ramp and trim fenders (waiting for all of the above)
6) buy front and rear master install kits
7) install the 4.88 gears in the D30 and the 8.8 (front gears in a box on my computer, rear in the mail, D30 3.73 up carrier and 8.8 notched cross shaft in a box next to the gears)

[/QUOTE]
amendum to above list. Got off work at 1:00 AM last night stopped by walley's world and bought one of those cheap 500 watt halogen lights and pulled an all nighter. 8:00Am Long arms on, shocks are on and track bar is on. Just need gears.

TORX

May 11th, 2009, 01:18

- Find a full size spare (DONE)
- Install some 297 shafts (DONE)
- Swap in a new gas tank (DONE)
- Some random maintenance items (DONE)
- Install OBA (DONE)
- Ruff Stuff diff covers (DONE)
- Custom Belly Pan (R&D)
- Bump stop suspension (in progress)

NW-ZJ-SCOTT

May 12th, 2009, 18:41

Yank motor, replace gaskets/ Both manifolds/blow by system and Complete exhaust
fixxrd.. replaced whole jeep..

Work done to my front bumper, extend the mounts back Possible before NWfest
weld in winch plate um...no
Warn winch Yeah.. on unemployment? ha!
33" KM2's Top Priority
8.8 money fell threw.. not gonna happen
D30 Aussied Second to top Priority

Add tow receiver to Durango. find someone to barrow trailer DONE

Im anxious..:party:

mojojojo

May 12th, 2009, 21:02

Im anxious..:party:

towing with a Durango ? whats the trailer weigh ? good luck :explosion

RlCHARD CRANlUM

May 12th, 2009, 21:12

Weld mounts on the HP44 front, then re-gear it to 5.38 with an Aussie locker.
Weld spring perches on the rear 60, then re-gear it to 5.38 and install a locker.
Figure out the hi-steer.
Find front and rear drive lines.
Figure out a wheel/tire combo.
Hack the wheel wells some more, rig flares and mud flaps.
Weld up the Ballistic Fab 44 and 60 covers.

NW-ZJ-SCOTT

May 12th, 2009, 23:47

towing with a Durango ? whats the trailer weigh ? good luck :explosion
I've been doin some research.. i feel confident in the Drivetrain. other then rear sag, i should be fine.. This Durango is rated at 6400lb towing. WIsh i had the 5.9 to bump it up.. but i'd still rather be safe then sorry on driving my junk 200 miles each way.:dunno:

2xtreme

May 13th, 2009, 12:39

I've been doin some research.. i feel confident in the Drivetrain. other then rear sag, i should be fine.. This Durango is rated at 6400lb towing. WIsh i had the 5.9 to bump it up.. but i'd still rather be safe then sorry on driving my junk 200 miles each way.:dunno:

6400lb towing capability doesn't give you much "wiggle" room.

I sometimes tow my XJ with my 2005 Grand (5.7 Hemi, 4x4, 7700lb tow capability) and people have comented I must be nuts (unibody Grand).

Here is my math for my set up, yours obviously will vary, but consider this:
1. 89XJ weights about 5000lbs with trail spares and mild camping gear, no passengers.
2. Trailer weights 2000lbs empty.
3. Trailer tools, straps, spares, box about 300lbs.
4. equals 7300lb.

There are lighter trails, but not many and not much lighter. There are lighter XJ's, I realize mine is not light. You may not have any extra weight on the trailer. You also might be over-weight and OK with that also.

Only pointing out that 6400lbs towing capabilities is going to be "tight".

On a similar but seperate note you might want to also consider which way to get to Naches because there are several significant hills (both up and down) to get there.

NW-ZJ-SCOTT

May 13th, 2009, 12:48

6400lb towing capability doesn't give you much "wiggle" room.

I sometimes tow my XJ with my 2005 Grand (5.7 Hemi, 4x4, 7700lb tow capability) and people have comented I must be nuts (unibody Grand).

Here is my math for my set up, yours obviously will vary, but consider this:
1. 89XJ weights about 5000lbs with trail spares and mild camping gear, no passengers.
2. Trailer weights 2000lbs empty.
3. Trailer tools, straps, spares, box about 300lbs.
4. equals 7300lb.

There are lighter trails, but not many and not much lighter. There are lighter XJ's, I realize mine is not light. You may not have any extra weight on the trailer. You also might be over-weight and OK with that also.

Only pointing out that 6400lbs towing capabilities is going to be "tight".

On a similar but seperate note you might want to also consider which way to get to Naches because there are several significant hills (both up and down) to get there.

Valid points. I still got some time to think about it. But i have Plenty of Towing experience, just not with this rig. Cant be anyworse then hauling an XJ on a dolly with another XJ for 70 miles.. so we will see..

fubar XJ

May 13th, 2009, 12:58

I've had issues, some of which I've worked out, others are in various stages of planning/work:

Replace toasted rear leaf springs: Done, thanks Jeremy
Replace VSS: Done, speedo still doesn't work
Replace/modify t-case linkage: Done, didn't fix problem. Further mods forthcoming.
Figure out charging/starting issue: Determined to be POS "dead" Optima after only 5 months, taking to 4WP for warranty this week.
Remove gauge cluster, attempt to replace/re-solder speedo to get it working: Pending
Convert useless A/C to OBA: Pending
Replace leaking front axleshaft and pinion seals: Umm, hopefully soon.
Fab bracket for aftermarket cone air filter: Done

I guess I'd better get my ass in gear here.:D

Avanteone

May 13th, 2009, 18:13

mojojojo

May 13th, 2009, 19:31

Ain't she sexy? Getting closer!

:D

http://img.photobucket.com/albums/v637/Avanteone/SHOP%20WORK/SUBLIME%20PHASE%20II/AXLE2.jpg
http://img.photobucket.com/albums/v637/Avanteone/SHOP%20WORK/SUBLIME%20PHASE%20II/AXLE1.jpg

yes, very ! :kissyou:

and for the record. . . . you suck !

http://www.naxja.org/forum/images/icons/icon10.gif

mojojojo

May 13th, 2009, 19:34

Valid points. I still got some time to think about it. But i have Plenty of Towing experience, just not with this rig. Cant be anyworse then hauling an XJ on a dolly with another XJ for 70 miles.. so we will see..

FWIW . . . my durango had the same tow capacity. my jeep = 4500 empty. my trailer alone (10,000 rating) weighed in at 2500. that does not include tools, gear etc... the rear end is actually how they rate the capacity on them. needless to say my durango is no longer in my driveway :nono:

NW-ZJ-SCOTT

May 13th, 2009, 19:55

FWIW . . . my durango had the same tow capacity. my jeep = 4500 empty. my trailer alone (10,000 rating) weighed in at 2500. that does not include tools, gear etc... the rear end is actually how they rate the capacity on them. needless to say my durango is no longer in my driveway :nono:
well, i cant argue as i havnt done it.. I cant get rid of the rig as it fits my family perfect, so i was gonna use it this time as a trial.. maybe i'll tow the jeep up to TSF one of these times and judge the setup then..:hang:

mojojojo

May 13th, 2009, 20:02

well, i cant argue as i havnt done it.. I cant get rid of the rig as it fits my family perfect, so i was gonna use it this time as a trial.. maybe i'll tow the jeep up to TSF one of these times and judge the setup then..:hang:

good call. i would highly HIGHLY recommend testing it closer to home. i payed 1500 to rebuild the tranny in mine. . . . and that was a deal !

NW-ZJ-SCOTT

May 13th, 2009, 20:22

good call. i would highly HIGHLY recommend testing it closer to home. i payed 1500 to rebuild the tranny in mine. . . . and that was a deal !
thats common in the 5.9s.. the 46re has been the main reliability issue with the durangos. I have the 45rfe, witch from research, is alot stronger for towing

ok ok.. end thread jack:wierd:

1987xjgirl

May 17th, 2009, 16:13

I would love to be there would have to pack get time off and most of all get a mild lift before even thinking of coming

Mc2KXJ

May 17th, 2009, 16:17

I would love to be there would have to pack get time off and most of all get a mild lift before even thinking of coming

You have plenty of time; see ya there!

fubar XJ

May 18th, 2009, 10:38

True, it's more than a month away, get busy and get it ready.:D

I managed to get my Optima warrantied through 4WP after determining that it was in fact the reason for my slow crank/hard start issue thanks to Larry at Lynnwood Auto Electric. He gave me a on-the-spot draw test, charge test, and load test to determine that everything was fine except for the battery not taking a charge. He told me he'd get me next time when I asked him what I owed him, can't put a price on service and attitude like that!

Next up is the t-case linkage re-do based on the modification thread that's been floating around the tech board here for awhile. I have the S-10 NP231 shift tab, the rod ends and all-tread rod. I'll tackle that this week, maybe even tonight.

Larry will get my repeat business for my non-functional speedo/odo. After replacing the VSS and disassembling and checking/cleaning the speedo head electrical connections, it's still a no-go. I'll try to get that in to him late this week as well.

Goddamn it's been a long time since this POS was fully-functional and I could confidently wheel it. :smsoap:

NW-ZJ-SCOTT

May 29th, 2009, 13:00

Good news, Finally paid membership dues..
Bad news, 1% chance i'm makin it to NWfest..

looks like im out. Moving/Wedding/work leave no room with finances or time for another expensive weekend.
:'-(

fubar XJ

June 1st, 2009, 06:56

UPDATE: Transfer case issue, SOLVED: Culprit: Disintegrated needle bearings hidden underneath planetary cluster on mainshaft. Cause: Unknown. Prognosis: If it lasted 17 years the first time, it ought to last through NW Fest.

Still to go: Dead speedo, replace leaking front shaft and pinion seals, convert A/C to OBA.

Avanteone

June 1st, 2009, 09:14

My rig is done, back down to washing and loading. :D

fubar XJ

June 1st, 2009, 10:18

I hate you.

Not really. ;)

Avanteone

June 1st, 2009, 10:24

You sure?

http://img.photobucket.com/albums/v637/Avanteone/SHOP%20WORK/SUBLIME%20PHASE%20II/051509_7637.jpg

fubar XJ

June 1st, 2009, 12:49

Alright, hating you again....

Is very nice!:D

Muddy Beast

June 1st, 2009, 17:12

New-ish stuff to do...

Solve overheating issue, replace overflow bottle and possibly radiator.
Change tranny filter/oil
Pay John

~Scott

Avanteone

June 1st, 2009, 17:26

Pay John

~Scott

Yes. Or else I am gonna take YOUR rig wheeling on the Moon Rocks. :D

RlCHARD CRANlUM

June 1st, 2009, 17:46

I'd kinda like to see that.

NW-ZJ-SCOTT

June 1st, 2009, 19:19

Yes. Or else I am gonna take YOUR rig wheeling on the Moon Rocks. :D
hmm. I Call shotgun:viking:

GlueNTape

June 1st, 2009, 21:37

You sure?

http://img.photobucket.com/albums/v637/Avanteone/SHOP%20WORK/SUBLIME%20PHASE%20II/051509_7637.jpg

That is a fine looking axle...

I am making good progress

axles - Gearing a lockers should be done this week
Lift kit - In process of installing - friggin work trips are killing me Should have this wrapped up and dialed in this weekend.
tires - see previous.. want them out of the living room..

Then just slap the rock sliders on and I am Good to go.. Hoping for a trial run June 12th.

Ba-Riedo

June 1st, 2009, 23:10

Flush coolent system, make front doors removeable, fix lower long arm bushings on the axle end.

-Alex

WaXJ_Skier

June 1st, 2009, 23:19

figure out why new radiator hose is leaking
build new track bar
weld new TB mount to axle
fix uca bushing on axle
install front locker
order and install alloy shafts for front
install TJ flares
install xfer case
make xfer case linkage work
switch flange CV to new rear DS
tons of other little crap

RedJeep2.0

June 2nd, 2009, 17:28

Gear box is ripping my jeep

Maybe a new bumper be for NW fest?

We will see...
Working on sliders and top rack

NickThePyro

June 3rd, 2009, 16:33

Install TNT 1ton OTK steering
Install TNT inner and outher steering box braces
Alignment
weld fender gap closed
bump stop front and rear
install KC 130W slim lights
wire power to CB and tune radio
tighten all the bolts and give full once over

looks like ill be making a deposit to ACRO soon

Ba-Riedo

June 4th, 2009, 00:25

OTK steering on a dana 30 is not ideal, but you probably already know that so I won't give you a lecture.

-Alex

NickThePyro

June 4th, 2009, 16:19

OTK steering on a dana 30 is not ideal, but you probably already know that so I won't give you a lecture.

-Alex
Whats bad about OTK?

Ba-Riedo

June 4th, 2009, 19:16

Whats bad about OTK?

Your going to have to do alot of work to do it on a 30, with the material the 1 ton is made out of you really don't need it. Also you won't be able to turn as tightly with OTK.

-Alex

WaXJ_Skier

June 4th, 2009, 22:55

I have the DOM (1.5" OD 3/8" wall) I need for the TB and I have the bracket. Just waiting on the rod ends and RE bracket.

XJ_ranger

June 7th, 2009, 16:44

get Cal Rocs to re-schedule their 3rd event? :wierd:

Matt_West

June 13th, 2009, 15:55

1. Replace rear shocks
2. Replace fuel filter
3. Lube / grease all fittings
4. Remount winch lower in bumper
5. Service rear brakes
6. Straighten steering wheel

Mc2KXJ

June 13th, 2009, 17:04

New front springs Done
Onboard Air Done
Rear bumper/airtank with lines Changed my mind
A way to mount a pony keg in the back and keep it cold I was only joking

Other than that, I'm pretty damn good. This is true

New rear leaf springs ?
Change the LSD in the rear for a Detroit Monday or Tuesday

Bruno™

June 13th, 2009, 17:15

-Install THORs with LEDs
-Install CB
-Trim front fenders more
-Install Hellas...:dunno:

-Lyle

CanMan

June 14th, 2009, 23:24

Engine=DONE
Removeable doors=DONE
Rocker replacements=NOT HAPPENING
'Frame stiffners'=NOT HAPPENING
Shackle boxes=SHOOTING FOR THIS WEEKEND
New leaf packs=SAME AS ABOVE
Gas tank, TC, trans skids=TC AND TRANS DONE
Assemble interio=DONE
2 new tires=DONE
Trans and PS coolers=DONE
Rear seat=DONE
Im sure there is more=MOSTLY DONE

I hate working on Jeeps. :D

WaXJ_Skier

June 14th, 2009, 23:30

progress made this weekend.

Aussie locker installed.
back bed lined
Ruff stuff cover for rear diff painted

ran into a few snags due to the DD not working half the weekend, but i'm making progress.

TORX

June 15th, 2009, 19:53

I'm pretty much done with the major stuff to do. Ran out of time on a few things (belly pan), but got the majority done.

Now I just have to change the oil, torque the suspension, pack, and wash the Jeep before next Wednesday.

Only 9 days to go!

mojojojo

June 15th, 2009, 21:55

to do:
- new steering box (might get to it?)
- flip tie rod (might get to it?)
- fluids all the way around (done, gonna need it again i'm sure. its a jeep, lol)
DONE - stock up on spare parts
- replace winch line (still hasn't broke yet)
DONE - adjust trac bar
DONE - OBA
DONE - disc brakes
DONE - prop valve
- E-brake set up
Half Done - rock lights
DONE - re-wire old stuff
- new front spots ?
DONE - Finish OBA tank
- ZJ Pitman arm
DONE - heat shield
- swap out Dustins front axle shaft

getting closer :D

WaXJ_Skier

June 15th, 2009, 22:52

I ordered front axle shafts today. Apparently IH Scout shafts are what I needed

RedJeep2.0

June 16th, 2009, 01:03

Front locker-done.
Sweet new front diff cover-done.
35inch boggers-done(well Barrowing)
All new rod ends and new v8 tie rod stuff-done.
Rock lights-done.
New front bumper-half done.
Rock sliders-half done.
99 durango steering box- have, just need to box in sub frame.
Frame box-half done.
2 red tops-done.
Zj pitman arm- hiting the yard tomorrow.
Spare front shafts-tomorrow.
New motor mounts-have, almost in.

!!!!!!!!!!!!!!!Little over a week!!!!!!!!!!!!!!!!!

Matt_West

June 17th, 2009, 22:04

Making progress... but adding more to the list:

Original list:
1. Replace rear shocks Done
2. Replace fuel filter Done
3. Lube / grease all fittings
4. Remount winch lower in bumper
5. Service rear brakes
6. Straighten steering wheel Done
New items:
1. Replace fuel pump
2. Replace battery
3. Resolve intermittent auxiliary fan operation Done
4. Add water wetter
5. Pool noodles in fenders
6. Get a second set of eyes to run through a tech inspection

XJCasper

June 18th, 2009, 01:43

Buy beer.
Drink beer.
Buy Tequila.

Oh, wait...
Not going.

Darn.

GlueNTape

June 18th, 2009, 07:54

Lift - DONE
TIRES - ON
Fenders - Trimmed
Rear Bumper - In Process
Front - Done
Rock sliders - Gonna be close..
Gas tank Skid - Close.. might do with out..

Muddy Beast

June 18th, 2009, 10:44

New CSF 3 row radiator - IN
New 195 thermostat - IN
New overflow bottle - IN
Diffs drained and refilled - DONE
Tranny drained and refilled - DONE
Starter grinding - Still working on, possible new starter in the works
Tophat roof rack - Still want one, none available
Pay John - DONE

Nothing left to do but finish my starter stuff, clean the rig out, and find someone to roll with me.

~Scott

Avanteone

June 18th, 2009, 11:44

Nick's rig in for prep, was done Monday.
Rich's rig in for prep, was done yesterday.
Alex's rig in for prep, was done yesterday.
Matt's rig in for prep, here today, should be done today.

I think I've got 1 or 2 more coming in next week.

:D

Mc2KXJ

June 18th, 2009, 12:46

Ba-Riedo

June 18th, 2009, 14:38

Thanks again, John.

This!:yelclap:

-Alex

noutlawjeeper

June 18th, 2009, 22:29

I'll be back soon. Haha

CanMan

June 20th, 2009, 08:42

It drives now.

Just a few things to button up and its ready for next weekend.

:cool:

Matt_West

June 23rd, 2009, 21:38

Well I ran out of time :helpme:... thankfully John at Auburn Car Repair has been kind enough to fit me in last minute and take care of the rest of my list.

Original list:
1. Replace rear shocks Done
2. Replace fuel filter Done
3. Lube / grease all fittings Thanks ACR
4. Remount winch lower in bumper Done
5. Service rear brakes Thanks ACR
6. Straighten steering wheel Done
New items:
1. Replace fuel pump Thanks ACR
2. Replace battery Done
3. Resolve intermittent auxiliary fan operation Done
4. Add water wetter Done
5. Pool noodles in fenders Done
6. Get a second set of eyes to run through a tech inspection Thanks ACR
Additional digressions:
1. Cut and fold rear quarters Done
2. Cut down rear bumper Done
3. Replace two worn tires Thanks ACR

Avanteone

June 23rd, 2009, 21:44

So, in addition to those posted earlier already, and Matt West's rig, I've had Jesse's (wang90xj), Steve (OlySteve), and Doug's (Fubar XJ) rigs through this week.

We should plan a couple more of these events each year. :D :laugh3: