front coils bow

So after wrenching on my XJ for four days now I'm almost done with my lift. I went with the RC 6.5 with the drop brackets. Only problem I see is the front coils are bowed forward. After talking to RC the LCA should be adjusted all the way in. This makes the coils bow not allowing me to install the swaybar disconnects. My question is if I adjust them out, Will this fix the bow or am I going to have problems with my pinion angle? I would search and research it, but I'm on a time deadline needing to be in Florida on Sat.

You'd probably get more help with this on the "MODIFIED" forum? Us newbie stockers don't know much about that lift stuff.

The sway bar brackets will probably need to be relocated, mine did with a RE 4.5 lift. They ghave drop brackets on their site or you could make your own.

Search is your friend.

Do you have upper adjustable arms too? If so you could easily fine tune the pinion angle by extending the uppers further out as you decrease the length of the lower arms.