Begster
NAXJA Forum User
- Location
- Cape Cod/Boston, Mass
Hey all, I was just hoping that some of the gear guru's would just take a look at this pattern for me.
HP44
Backlash: 0.007" (spec: 0.006-0.010")
Pinion bearing preload 0.016" (spec: 0.014"-0.019")
Drive:
Coast:
HP44
Backlash: 0.007" (spec: 0.006-0.010")
Pinion bearing preload 0.016" (spec: 0.014"-0.019")
Drive:
Coast: