JabosXJ
NAXJA Forum User
- Location
- Chattanooga Tn
Im looking for a set of aftermarket gauges to go in my xj does anyone know of a set that can be bought to do away with the stock gauges.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
looking for gauges
- Thread starter JabosXJ
- Start date
finn188
NAXJA Forum User
- Location
- logandale, NV
have you looked at summit for an A pillar guage mount? seems like that wouldnt be too difficult but i dont think a speedo or tach would fit there. so do you just want to add guages, or replace all of them?
Stihl029
NAXJA Forum User
- Location
- San Diego, CA
Check this link out it is a pretty sweet mod for what you already have.
http://www.go.jeep-xj.info/Whitebground.htm
http://www.go.jeep-xj.info/Whitebground.htm
JabosXJ
NAXJA Forum User
- Location
- Chattanooga Tn
The top part of my cluster has went crazy.The temp is saing it is 260 and the oil pressure gauge will shiw 60 psi and then drop down to 0 and bounce back up to about 60 at a idle so something if gone freaky in the wiring I suppose.So to keep from having to re wire everything I just want to put aftermarket gauges in the place of the factory ones.
Stihl029
NAXJA Forum User
- Location
- San Diego, CA
Have fun with that one. It sounds like you have some electrical gremlins in your rig. could you fill us in on your rig.
JabosXJ
NAXJA Forum User
- Location
- Chattanooga Tn
Not going to rewire. Going to figure out how to replace the gauges with aftermarket ones.