Ball joints and u joints

I decided to start with these since I don't have too much cash just yet. For U joints I was going to use the Spicer 5760X for the axle u joints and Spicer 1310 or 1330 u joints for the drive shafts. That is my first question, do I need the 1310 (3 7/32" wide) or the 1330 (3 5/8" wide)? Are all 4 axle u joints the same?

For the ball joints I was looking at http://www.4wd.com/productdetails.aspx?partID=13832 for the upper and http://www.4wd.com/productdetails.aspx?partID=13833 for the lowers.

This is a stock 96 XJ sport 4x4 and I just need reliable replacement parts for now, no crazy wheeling parts.

So I think Im looking for:
2- 5760X's for the axles
4- 1310's or 1330's for the driveshafts
2- upper ball joints
2- lower ball joints

Any help is appreciated

Need to know what year and if you have ABS to tell you what axle u-joints you'll need.

96 with ABS

Thank you

you can save a few bucks on the ball joints at RockAuto

SPICER Part # 5001058B More Info
Front Suspension; Upper

$13.12

SPICER Part # 5051117B More Info
Front Suspension; Lower

$13.12

www.rockauto.com

you only have 2 axle u-joints. and the d/shaft uses 1310s.

What I meant to ask was if all 4 DRIVESHAFT u joints were the same. Sorry about that

yessir-- best I remember, they're all the same on the driveshafts