quick master cylinder question(pic)

I pulled the hose off the cylinder, and when I pump the clutch, I figured that fluid should be squirting out of the hole where the clutch hose was. Well little to none comes out. Does that mean its dead?

Looks empty to me

You know, a while back my plastic line blew a hole in it and I lost pedal(obviously). I got my new hose on and filled the reservoir and thought that I would let gravity bleed the line before hooking it up to the slave. It never allowed fluid down the line. I tried pumping the pedal and couldn't get fluid. I thought that I had maybe screwed the master cylinder up when it ran dry. But the I saw the 1 way type valve in line on the slave side and I put the hoses together. Bled just fine. It was sucking air just as fast as pumping fluid I presume. Put the hose back on it to bleed?