TCase Swap Q's - late model 231 into a 93 w/ 231

P

peleejosh

NAXJA Forum User

Location

Nashville, TN

• Dec 7, 2007

• #1

Are there any issues swaping a late model (97+) 231 into a 93 cherokee? My 93 has the 231 in it. The new 231 has an sye already installed. I know I will need a new driveshaft, but is that all?

Thanks

Josh

 

90Blue_XJ

NAXJA Forum User

Location

In yer postz fixin yer spellinz.

• Dec 7, 2007

• #2

If front yoke is missing then check spline count for matching number of splines.Otherwise should be a direct bolt-in.

 

sjkimmel99

NAXJA Forum User

Location

Phoenix, Az

• Dec 8, 2007

• #3

This article has some good info on the differences - http://www.novak-adapt.com/knowledge/np231.htm

Spline count and how far the input shaft sticks out being the two main items.

 

F

falcon556

NAXJA Forum User

Location

Tulsa

• Dec 8, 2007

• #4

peleejosh said:

Are there any issues swaping a late model (97+) 231 into a 93 cherokee? My 93 has the 231 in it. The new 231 has an sye already installed. I know I will need a new driveshaft, but is that all?

Thanks

Josh

Click to expand...

The rear driveshaft won't fit. 96 and up have the sealed rear.

 

P

peleejosh

NAXJA Forum User

Location

Nashville, TN

• Dec 9, 2007

• #5

I know the rear drive shaft prolly won't work, but the new tcase has an sye already on it, so i am picking up a front driveshaft from the pick and pull.