trannie cooler

Has anybody ran an external trannie cooler on the passanger side of the radiator and plumbed the rubber hoses down the passanger side also?
Mine has a HUGE trannie cooler that takes up 65% of the AC Condenser but the lines run under the motor, on top of the steering box and across the radiator into the cooler. I was wanting to simplify the install and run them down the pass side but it is TIGHT in there in relation to the mechanical fan and stuff.

Pics would be great if anyone has routed the lines this way.

Thanks

Brian, If you have the room Do It! Its just pressure and return, nothing mystical.

as long as you can secure them well enough....then you should be good to go

Ended up running 1 hose under the front support brace and the other down along the alternator. They seem to be far enough away from anything that could cut them.
Jeep runs GREAT now and is on the road although it has no shocks.

BTW, I never realized how damn hot the power steering fluid got until i put on a cooler and felt the warmth of that. WOW!!!