PDA

View Full Version : Cherokee Crawl Swap Meet

RedHeep
June 3rd, 2007, 14:31
I'll start. This is what I have/can bring:

'91 HP D30/D35 3.55 open/open
Rockcrusher D35 diff cover
'91 4.0 shortblock (needs rebuilt)
HO intake/exhaust manifolds
'91 factory roof rack

Make offers.
yellowxj
June 3rd, 2007, 18:07
I've got a semi floater D60 w/ 3.73 gears out of a ford van IIRC I could bring...
99NCXJ
June 3rd, 2007, 19:33
i've got lots of zj parts including glass, window motors, ect...
87manche
June 6th, 2007, 13:31
I have:

a crapton of dana 35 parts, all non-c clip.
one carrier 3.55 and lower
one carrier 3.73 and higher
a stupid number of spare shafts (if you still have a D35 and are coming, I will bring you shafts)
2 housings, setup for Mj's (likely going to scrap next week, pipe up if you want one)
stock Mj front springs
about 6 D35 brake backing plates.
about 6 D35 drums (been sitting, should probably be turned to remove surface rust)
Comanche Inner fender liners

I'm sure there's more, I just can't remember right now.
Mark WNC
June 6th, 2007, 20:41
I have a dana 60 front and sterlin 70 rear I think 93 or 94
I can bring if anyone is interested.
Stock 3.55 gears
chopperdonk
June 13th, 2007, 14:09
i have three almost complete cherokees if any on needs anything let me know
RedHeep
June 13th, 2007, 14:22
i have three almost complete cherokees if any on needs anything let me know

Are you coming to the crawl?
chopperdonk
June 13th, 2007, 20:26
yes i will be there friday morning
XJCRAWLER
June 15th, 2007, 20:45
i have three almost complete cherokees if any on needs anything let me know


What years?
chopperdonk
June 16th, 2007, 10:01
I HAVE TWO 93 2WD AND ONE 89
Georgia Mike
June 20th, 2007, 18:36
I need a front driveshaft!!!
:dunno:
Ghost
June 20th, 2007, 22:53
I need a front driveshaft!!!
:dunno:
Why didn't you tell me that when you were here?
Georgia Mike
June 20th, 2007, 23:04
Dunno? Why, do you have one?
Ghost
June 21st, 2007, 05:35
Dunno? Why, do you have one?
Yes, I also have a ax-5 and a 21 spline 231.
The Hard Struggler
June 28th, 2007, 21:28
I have a set of stock 8.8 axles and a set of R.E. 4.5" non ajustable control arms,brand new, went longarms so I don't need them.
RedHeep
June 29th, 2007, 06:47
I'll start. This is what I have/can bring:

'91 HP D30/D35 3.55 open/open
Rockcrusher D35 diff cover
'91 4.0 shortblock (needs rebuilt)
HO intake/exhaust manifolds
'91 factory roof rack

Make offers.

D30 is gone.

How much for the 8.8?

Also WTB set of D30 shafts in a 297 variety.
Georgia Mike
June 29th, 2007, 19:38
I'm probably gonna build an extra set of rock rails and bring them to sell if anyone may be interested.
chopperdonk
July 2nd, 2007, 11:31
how much for a set of rock rails
Georgia Mike
July 2nd, 2007, 22:00
Sorry, I think they've already been spoken for. After the crawl I could build you a pair for $150, if you'd still be interested....
RedHeep
July 3rd, 2007, 07:32
I have a set of stock 8.8 axles and a set of R.E. 4.5" non ajustable control arms,brand new, went longarms so I don't need them.

How much for those axleshafts?
Georgia Mike
July 9th, 2007, 17:40
I also have a Tomken trackbar lowering bracket I'd like to sell if anyone needs it. It's the frame side bracket that drops the trackbar roughly 3".
uncc civilengineer
July 9th, 2007, 19:46
I have some misc. stuff.. any interest:

1. Teraflex front lower BPEs (few months old)
2. (2) 1" QA1 rod ends (1" RHT and 1" bore) (NEW)
MrMom
July 9th, 2007, 19:59
stuff I can bring
over the knuckle DOM heim steering set up needs a couple new heims
Warn TJ winch mount
Auburn 8.25 LS full carrier for 4.10 and up I think
any body looking for anything odd
have lots of odds and ends
87manche
July 9th, 2007, 22:08
all my d35 crap went to scrap the opther day, except two shafts I kept.
I'll be bringing them for the random sap that has a broken d35.