-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Light Console
- Thread starter jman
- Start date
- Location
- Minneapolis, MN
The front screws are next to the windshield and near where the visors clip into. Twist the visors out of the way and remove 2 phillips screws. Gently slid the whole console forward towards the windshield. Unplug the 2 wire harness cables.
To install, plug in the wire harness, slip the "beaver tail" into the headliner, hold the console in its place, install the 2 front screws. Now gently push up on the rear of the console, near the rear dome lights, until both sides snap into the rear bracket on the roof.
To install, plug in the wire harness, slip the "beaver tail" into the headliner, hold the console in its place, install the 2 front screws. Now gently push up on the rear of the console, near the rear dome lights, until both sides snap into the rear bracket on the roof.
