What do you need to get done between now and then?

[XJourney]

Well I wanted the honor of starting the first thread.

So what does your Jeep/RV/Tow Rig need to have done before you can go to NW fest? I know it is kinda early to think that far ahead, but lets here it anyway.

1 5 new Maxxis tires in the 33" flavor,

2 In order to fit those tires I have to install 2 more inches of lift.

3 I need wheels that don't make my tires rub on everything.

4 Replace my coax cable on my CB after Evans killed it.

5 I would "LIKE" to finish my bumpers someday.

6 For Michael, finish the 71 Super Beetle for the fifth year in a row

I have no car trailer and no RV to tow my jeep, So I am wheeling hardcore style, drive there and home AGAIN.

What about you?

[Matt98XJ]

1: 2 new rear tires. Replaced the front a month ago, but didn't have the money for the rears.
2: Alloy shafts for the rear 44, and regearing to 5.13.
3: Finish my front 44. Still needs shafts, and a locker.
Thats about it.

[CanMan]

2 new TSL's. Maybe 4.

Better than stock X member.

SYE and DS.

Chop back half of roof off.

Maybe add some sort of cage if the roof gets chopped off.

Remove doors and carpet.

Relocate rear shocks.

Diff guards F&R.

A few more things...

Then have enough $$$ to try to make it to Serria Fest.

[ECKSJAY]

New serp belt
Annual oil change
Finish rear deck for cargo area
Install stereo
Finish bling LED dash lights
Practice wheeling at the mall
Visit Alaska
Kick Chuck Norris' tail in Roshambo
Pick up case of sardines
:looser:

[PDeeXJ]

Remove doors

I suppose I'll need some tow points, maybe even a hitch.
Full size spare.
Coil spacers for a 2 inch lift.
And get this 6mpg thing figured out....

[Sniggs]

1: 2 new rear tires. Replaced the front a month ago, but didn't have the money for the rears.
2: Alloy shafts for the rear 44, and regearing to 5.13.
3: Finish my front 44. Still needs shafts, and a locker.
Thats about it.
missed one there, Skippy! (whispered) membership:shhh:

[Matt98XJ]

missed one there, Skippy! (whispered) membership:shhh:

Only members are allowed on the run?

[ECKSJAY]

Only members are allowed on the run?

Members invite a non-member, usually. ;) You either have to be invited along or join at the event. Last year we waived event fees to those who signed up for 2 years at the event. :)

[IXNAYXJ]

Hmmm. I think I'm ready. Hell, the Jeep's even packed.

-----Matt-----

[KyletheJeepguy]

Im new here.... what, when, and where is NWfest?

[CanMan]

Im new here.... what, when, and where is NWfest?

Hope to see you there!

http://www.naxja.org/forum/showthread.php?t=904994

[Kilted XJer]

beef up or replace front bumper
2 more inches of lift
locker for d30
rock sliders
spare parts

[XJourney]

Hmmm. I think I'm ready. Hell, the Jeep's even packed.

-----Matt-----

You would be in great shape if it were next weekend. But it isn't, you have things to fix, they just haven't broken yet. ;)


Hans

[workaholic]

1: finish gathering parts and install my 4.5" lift
2: get 4 tires to mount on my 15x8's (preferebly at least a 31")
3: regear my axles and hopefully put at least one locker in
4: MAYBE come up with some new bumpers that dont stick out so damn far.
5:finish stereo install
6:Membership
7:MAYBE install my stroker (if its built, no biggie if it isn't done i'm in no hurry for it)
8: come up with some sort of rocker protection, too bad almost nobody makes them for MJ's

Tom

[KyletheJeepguy]

Thanks for the info, i already have passengers coming along. is the $30 forest pass per person or per vehicle? how much is it to get into the event? I need the full bill so I can let everyone know how much to give me. And in regards to this thread, I need:

Lockers
Steering upgrades (stabilizer, tie rod, extended track bar)
new rubber (I need some new 33s or 35s if anyone has them for $500 or less)
new steering box
winch and kc's (probably not anytime soon)
rear disk brake conversion (any thoughts on the best way for this? I know, I know Mark, keep it in the tech section...:dunce: )

-Kyle

[CanMan]

The forest pass will cover one vehicle. No need to get one for each person.

[mojojojo]

Glad i am not the only one thats so excited that i am already packing :clap:

1. gears front and rear
2. Aussie's front and rear (if i ever get the rear from northridge):mad:
3. get the D44 installed
4. Crusher diff covers front and rear
5. install belly pan x-member
6. gas tank skid still needs installed
7. still can't get my NSS to work. if i do then i'll put on the after market back-up lights i got.
8. if time and money permit...rear disk conversion on the 44.
9. whatever breaks between now and then
10. probably some other misc. stuff i am forgetting, but 1-7 should clean the parts outta my garage.

[Blkxjkrawler]

Well, now my quarter guards and tail lights are done, the list reads like this

Install front Aussie locker and new axle shafts
Some sort of HD steering
on board air
new exh manifold
new radiator, possible aux trans and ps coolers
storage box/drawer/shelf/cabinet for cargo area
track down some spares
If the below doesnt happen reinforce front recovery points.

What I'd really like to have happen but wont:
Fab Front, rear bumpers and rocker replacements, get winch.
dont break anything else in between.

[GreenbeltXJ]

Matt's axles
33in. rubber
Rusty's HD track bar and mount
Rusty's steering box reinforcement
Sell old axles and locker

Hopefully all will be done before march mud fest.

[SpazMoid]

1: Buy Membership
2: Ask off from work
3: Custom Fab New Front / Rear Bumpers
4: Install Both Winches that are sitting in my garage
5: Get extended TB
6: Install Detroit Locker
7: Fab new rockers
8: Buy new bigger Tent

Are dogs allowed at this? If not I may not be able to come, I have 2 Purebread Akita's about 115lbs each.

[workaholic]

1: Buy Membership
2: Ask off from work
3: Custom Fab New Front / Rear Bumpers
4: Install Both Winches that are sitting in my garage
5: Get extended TB
6: Install Detroit Locker
7: Fab new rockers
8: Buy new bigger Tent

Are dogs allowed at this? If not I may not be able to come, I have 2 Purebread Akita's about 115lbs each.

I was wondering the same thing I have a 65lb pit bull I would love to bring, just not sure what I would do when we are out on the trail :dunno:

Tom

[adamusmc2002]

I suppose I'll need some tow points, maybe even a hitch.
Full size spare.
Coil spacers for a 2 inch lift.
And get this 6mpg thing figured out....

I've got a hitch for cheap... it's a 1 &1/4", but it'll work. I used it as a rear recovery point for a year and a half. If interested, PM me, 20 bucks and it's yours.

Adam

[90exjay]

Hmm lets see

Install d44 in rear w/4.88's
Install non-disco d30 w/4.88's
Purchase some body armor,rails and thor's.
Purchase cb, thats not chrome and hideous.
Mount fullsize spare on rim.

That should just about do it, oh yeah buy bumpers and winch.:doh:

Sean

[XJCasper]

Looking at the list and talking to Jamez yesterday, maybe we should talk/pay John to open the shop for a Sat or Sun locker install day.

[WaXJ_Skier]

1. Get Membership (I get paid in 24hours so consider it done)
2. front tow points
3. Get lift (likely done durring march RE 3.5" or 4.5")
4. bigger tires (31s or 33s havent decided yet depends on how lift goes)
5. locker for D30 up front (hopefully sometime in the next 3 months)
6. get rid of rear d35 and lower gears for d30 and d35 replacement (gonna be close if I can pull that by june)
7. winch for front
8. rear locker

so I should be able to get 1-5 done by june. 6 is iffy and 7 and 8 are probably going to be for late summer early fall. Unless of course I find some sweet deals and don't blow too much money on females between now and then. oh yeah almost forgot herculine inside of jeep and get rid of gas smell entirely (making sure of course not to touch hootus while herculining).

[Avanteone]

Looking at the list and talking to Jamez yesterday, maybe we should talk/pay John to open the shop for a Sat or Sun locker install day.


hahaha... I may be down, as long as it's not like the Gearfest clusterfawk ;)

Let's see.... what do I need to do.... get Matt's axles off my rig (hopefully Saturday).... build new axles... dunno, I guess that's about it, should be done by March mudfest :)

On a side note, does anybody have one of those fancy DVD projectors? It'd be cool to be able to sit around camp and watch wheeling movies at night. :laugh2:

J

[WaXJ_Skier]

On a side note, does anybody have one of those fancy DVD projectors? It'd be cool to be able to sit around camp and watch wheeling movies at night. :laugh2:

J

I almost bought one last month but the decision came down to projector or Jeep. I think I made the right decision.

[XJourney]

On a side note, does anybody have one of those fancy DVD projectors? It'd be cool to be able to sit around camp and watch wheeling movies at night. :laugh2:

J

That is what we did last year at NWfest. Well except it was 20 guys around a laptop.:jester:

[WaXJ_Skier]

That is what we did last year at NWfest. Well except it was 20 guys around a laptop.:jester:
I could bring my 22" lcd and surround sound system if somebody wants to bring a generator

[workaholic]

I could bring my 22" lcd and surround sound system if somebody wants to bring a generator
I may or may not own a 2500w generator ;) only thing is its loud so i'm not sure how that would work.

Tom

[Avanteone]

I could bring my 22" lcd and surround sound system if somebody wants to bring a generator

I will be there /w full hookups, generator, etc ;) I'll try and dig up some pics of my version of "roughing" it for those who don't know me. :)

J

[4x4Fox]

rear disk brake conversion

-Kyle[/QUOTE]

Brakes do I need brakes. How can you wheel with brakes. I thought that what low gears were for?

1) Put doors back on
2) put axles back on
3) Take off the pink "off Road Princess" sticks my son's-n-laws stuck on my jeep :smsoap:
other then that I'm good.

[GreenbeltXJ]

Matt's axles
33in. rubber
Rusty's HD track bar and mount
Rusty's steering box reinforcement
Sell old axles and locker

Hopefully all will be done before march mud fest.

axles on!
rusty's crap in the mail, should be here this week

[WaXJ_Skier]

1. Get Membership (I get paid in 24hours so consider it done)
2. front tow points
3. Get lift (likely done durring march RE 3.5" or 4.5")
4. bigger tires (31s or 33s havent decided yet depends on how lift goes)
5. locker for D30 up front (hopefully sometime in the next 3 months)
6. get rid of rear d35 and lower gears for d30 and d35 replacement (gonna be close if I can pull that by june)
7. winch for front
8. rear locker

so I should be able to get 1-5 done by june. 6 is iffy and 7 and 8 are probably going to be for late summer early fall. Unless of course I find some sweet deals and don't blow too much money on females between now and then. oh yeah almost forgot herculine inside of jeep and get rid of gas smell entirely (making sure of course not to touch hootus while herculining).

scratch #1 off the list

1. Get Membership
2. front tow points (working on it now)
3. Get lift (likely done durring march RE 3.5" or 4.5")
4. bigger tires (31s or 33s havent decided yet depends on how lift goes)
5. locker for D30 up front (hopefully sometime in the next 3 months)
6. get rid of rear d35 and lower gears for d30 and d35 replacement (gonna be close if I can pull that by june)
7. winch for front
8. rear locker

[cleatus92]

Go to local pull and save yard and pick up a 231.
Install 231
Then install the reason for the 231 swap, a TnT Y-link system.
Get alignment then wheel'er some more.
Cleatus92
Trevor

[GreenbeltXJ]

Originally Posted by GreenbeltXJ
Matt's axles-done
33in. rubber-not going to happen:bawl:
Rusty's HD track bar and mount-done
Frame Strengthener & Trac-bar Mount Brace-done
Rusty's steering box reinforcement-need to get rite drill bit
Sell old axles and locker -locker sold...who needs an 8.25??

Hopefully all will be done before march mud fest

[WaXJ_Skier]

I may or may not own a 2500w generator ;) only thing is its loud so i'm not sure how that would work.

Tom

so we run a few hundred feet of exstension cord and put the generator in a remote location

[Avanteone]

so we run a few hundred feet of exstension cord and put the generator in a remote location

According to the most recent posts, doesn't sound like there's gonna be any camping... but if there is, I'll be there and my generator is near silent ;)

J

[WaXJ_Skier]

According to the most recent posts, doesn't sound like there's gonna be any camping... but if there is, I'll be there and my generator is near silent ;)

J
but that takes all the fun out of running retarded amounts of cable

[2xtreme]

My NEED list is short:
1. Install brake controller on both tow rigs (not sure which we will bring yet).
2. Since we sold the Motorhome, we might need to buy a bigger tent, and update the camping stove;)
3. The XJ doesn't NEED anything.

My WANT list is much longer:
1. Finish the tube fenders.
2. Install pressure switch for OBA.
3. Install rock lights.
4. Install shaved/trussed D44 with 4.88's and spool.
5. Install more flexible rear spring pack.
6. Install front locker with 297 shafts (new hubs at same time).
7. Build gutter slider and "A" pillar support.
8. Move and build new TB and move steering to OTK.

Michael

[ECKSJAY]

According to the most recent posts, doesn't sound like there's gonna be any camping... but if there is, I'll be there and my generator is near silent ;)

J

Where'd it say that? We've already got the spot lined up... :D

[WaXJ_Skier]

Where'd it say that? We've already got the spot lined up... :D


I think he got this thread confused with the walker valley thread

[ECKSJAY]

I think he got this thread confused with the walker valley thread

Either that or the inactivity over here. :D

[GreenbeltXJ]

I think he got this thread confused with the walker valley thread

well, i did too, but i guess i will definatly be set up for northwest fest

[Avanteone]

Yup, got this corn-fused /w the Walker thread.

I'll be caming at NWFest, I'll have my trailer and generator... bring your power strips and extension cords :) hahahaha

[Avanteone]

Actually made a little progress today. Got my spring perches and shock mounts on my rear axle and got it bolted into the rig ;) My Super 8.8 kit is SUPPOSED to be here Monday.... we'll see :)

[Blkxjkrawler]

My Super 8.8 kit is SUPPOSED to be here Monday.... we'll see :)

OOOHHH, John post up some pics when you get it in, and maybe of the install I'm very interested in seeing these.

Front locker and Drop Brackets are in/on.

still to do:
straighten/Reinforce front recovery points
OBA (PLZ)
JCR 1ton steering (maybe), or at least align again
got the airsoft measured out and bagged, now just gotta get them in the trxus.
Eleventy scrillion other small things.

[Avanteone]

Super 8.8 is here. I'll get pics of the install.

J

[zachxj01]

1. membership will get done soon
2.find a way to get across country w/o a tow rig in 2 days because i graduate high school 2 days before it and dont wanna miss that
3.install dif covers sitting on my floor
4. paint and install bumpers w/ tow points sitting in garage
5. finish sliders and install
6. perhaps a rear locker atleast
i doubt i will make it lol

[cleatus92]

Go to local pull and save yard and pick up a 231.
Install 231
Then install the reason for the 231 swap, a TnT Y-link system.
Get alignment then wheel'er some more.
Cleatus92
Trevor

Done. Got the Y-link on, the T-case in, and for good measure threw an Aussie in the front. As well we Aussie Locked my dads front and installed a DPG skidplate.
Cleatus92

[90exjay]

Hmm lets see

Install d44 in rear w/4.88's(done)
Install non-disco d30 w/4.88's(soon to be done)
Purchase some body armor,rails and thor's.(half done)
Purchase cb, thats not chrome and hideous.(done)
Mount fullsize spare on rim.(oops forgot about this one,soon to be done)

That should just about do it, oh yeah buy bumpers and winch.:doh:

Sean

[Avanteone]

Made some progress:

http://www.naxja.org/forum/showthread.php?t=912406

[mojojojo]

Glad i am not the only one thats so excited that i am already packing :clap:

1. gears front and rear
2. Aussie's front and rear (if i ever get the rear from northridge):mad:
3. get the D44 installed
4. Crusher diff covers front and rear
5. install belly pan x-member
6. gas tank skid still needs installed
7. still can't get my NSS to work. if i do then i'll put on the after market back-up lights i got.
8. if time and money permit...rear disk conversion on the 44.
9. whatever breaks between now and then
10. probably some other misc. stuff i am forgetting, but 1-7 should clean the parts outta my garage.

:repair: #5 & 6 in the next cpl weekends, 7 is on order, 8 is being replaced with the duel booster swap from a 95'. 10 turned out to be U joints and a SYE. everything else is done, done, done! party1:

[WaXJ_Skier]

scratch #1 off the list

1. Get Membership
2. front tow points (working on it now)
3. Get lift (likely done durring march RE 3.5" or 4.5")
4. bigger tires (31s or 33s havent decided yet depends on how lift goes)
5. locker for D30 up front (hopefully sometime in the next 3 months)
6. get rid of rear d35 and lower gears for d30 and d35 replacement (gonna be close if I can pull that by june)
7. winch for front
8. rear locker

add 3 and 4 to the list

1. Get Membership
2. front tow points (working on it now)
3. Get lift (likely done durring march RE 3.5" or 4.5")
4. bigger tires (31s or 33s havent decided yet depends on how lift goes)
5. locker for D30 up front (hopefully sometime in the next 3 months)
6. get rid of rear d35 and lower gears for d30 and d35 replacement (gonna be close if I can pull that by june)
7. winch for front
8. rear locker

[ECKSJAY]

My list just started over. :D

[XJCasper]

My list just started over. :D

Considering my recent experiences, that sounds scary.

Anyway.

1) Hey Matt, want to go look at a car tomorrow?

[black89xj]

1. Money for Gas
2. More Money for Gas
3. Still More Money for Gas
4. Yet Still More Money for Gas

[ECKSJAY]

1. Money for Gas
2. More Money for Gas
3. Sell a lung for Gas
4. Yet Still More kidneys for Gas

Fixed that for ya. ;)

[CanMan]

1. Money for Gas
2. More Money for Gas
3. Still More Money for Gas
4. Yet Still More Money for Gas

5. Stay away from Michaels winch!

[CanMan]

A little of an update.



2 new TSL's. Maybe 4.

http://i112.photobucket.com/albums/n187/12GaugeXJ/100_3862.jpg

Better than stock X member.

Ordering the TnT HD replacement one next month, or might 'beef' up a stock one.

SYE and DS.

http://i112.photobucket.com/albums/n187/12GaugeXJ/100_3865.jpg

Lengthened front shaft by Bill @ Aukeen Driveline.

http://i112.photobucket.com/albums/n187/12GaugeXJ/100_3866.jpg


Chop back half of roof off.

Wont Happen this year. :( But will more and likley be hatchless.

Maybe add some sort of cage if the roof gets chopped off.

Might start at the end of the summer.

Remove doors and carpet.

Doors will stay on, possibly half doors for the front. Carpet might stay, but probably not.

Relocate rear shocks.

Next weekend.

Diff guards F&R.

RuffStuff ones next month.

A few more things...

Got some rock lights, and newer rear brakes.


Then have enough $$$ to try to make it to Serria Fest.

Won't happen, gas prices way too high, should of expected it. Next year hopefully.

[WaXJ_Skier]

add 3 and 4 to the list

1. Get Membership
2. front tow points (working on it now)
3. Get lift (likely done durring march RE 3.5" or 4.5")
4. bigger tires (31s or 33s havent decided yet depends on how lift goes)
5. locker for D30 up front (hopefully sometime in the next 3 months)
6. get rid of rear d35 and lower gears for d30 and d35 replacement (gonna be close if I can pull that by june)
7. winch for front
8. rear locker

1. Get Membership
2. front tow points (done)
3. Get lift
4. bigger tires (32s on)
5. locker for D30 up front (in progress)
6. get rid of rear d35 and lower gears for d30 and d35 replacement (in progress)
7. winch for front
8. rear locker

5 or 6 will be done by NWFest

[ECKSJAY]

Parted out Jeep.

Just need to go for a few familiarization runs in the new Jeep and I'll be set.

Need a 4-prong socket for the Dana 44 front end and a set of Allen sockets. :eyes:

[XJSlater]

Since i'm not a member and am not 18, am i SOL for this year??
if so, thats a bummer

[2xtreme]

Parted out Jeep.

Just need to go for a few familiarization runs in the new Jeep and I'll be set.

Need a 4-prong socket for the Dana 44 front end and a set of Allen sockets. :eyes:

I get the sense you might be holding out on us?
Michael

[Avanteone]

I get the sense you might be holding out on us?
Michael

Yes. Yes he is. :nono:

[CanMan]

I get the sense you might be holding out on us?
Michael

Its a perty well set up rig. I believe he is even getting it today. ;)

[ECKSJAY]

Its a perty well set up rig. I believe he is even getting it today. ;)

http://www.naxja.org/forum/showthread.php?t=919414

:D:D:D

[fubar XJ]

So I can join at this event, right? I've been lazy, putting it off, not remembering when I'm writing bills out, etc. It'd be great to just hand someone some cash and be done.

As far as what I need to get done:

1. Finish boxing rear bumper & build tire carrier
2. Install front bumper, including framerail doublers
3. Install & route wiring for winch
4. Install TJ flares

[WaXJ_Skier]

So I can join at this event, right? I've been lazy, putting it off, not remembering when I'm writing bills out, etc. It'd be great to just hand someone some cash and be done.

As far as what I need to get done:

1. Finish boxing rear bumper & build tire carrier
2. Install front bumper, including framerail doublers
3. Install & route wiring for winch
4. Install TJ flares


paypal = instant red

[fubar XJ]

I don't have paypal, I'm a friggin' Luddite when it comes to that stuff.

Can I pay someone at the event, or am I going to have to mail a check?

[MY92XJ]

heres my list after memorial weekend:

replace transfercase
replace rear driveline
replace rear yolk
replace driver
add roll cage
add new springs
get bigger tires
add air lockers
change gears
build more body armor
add a long arm kit
rob a bank so I can pay for all this

[ECKSJAY]

rob a bank so I can pay for all this

I'm telling. :D

[CanMan]

I'm telling. :D

Shhh... Im in on it with her. But she don't know it yet. :D

[PornstaR]

heres my list after memorial weekend:

replace transfercase
replace rear driveline
put in wils transfer case, driveline, and u-joint
replace rear yolk
replace driver :laugh2:
add roll cage
add new springs AND SHACKLES
get bigger tires
add air lockers
change gears
build more body armor
add a long arm kit
rob a bank so I can pay for all this

Fixed it for ya.....

and Phil I pmed ya.

[MY92XJ]

Shhh... Im in on it with her. But she don't know it yet. :D

I know nuttin :anon:

[MY92XJ]

[quote=PornstaR]Fixed it for ya.....quote]

thank you so much :D

[mojojojo]

Glad i am not the only one thats so excited that i am already packing :clap:

1. gears front and rear
2. Aussie's front and rear (if i ever get the rear from northridge):mad:
3. get the D44 installed
4. Crusher diff covers front and rear
5. install belly pan x-member
6. gas tank skid still needs installed
7. still can't get my NSS to work. if i do then i'll put on the after market back-up lights i got.
8. if time and money permit...rear disk conversion on the 44.
9. whatever breaks between now and then
10. probably some other misc. stuff i am forgetting, but 1-7 should clean the parts outta my garage.

:repair: #5 & 6 in the next cpl weekends, 7 is on order, 8 is being replaced with the duel booster swap from a 95'. 10 turned out to be U joints and a SYE. everything else is done, done, done! party1: .

1-7 DONE !
2 ended up including gears as well. DONE !
8 turned out to be the duel booster swap. DONE !
9 turned out to be drive lines and SYE, also DONE !
10 has ended up being a winch and new front bumper to mount it to. 14 days and counting.

see ya guys there :wave1:

[XJourney]

Well I wanted the honor of starting the first thread.

So what does your Jeep/RV/Tow Rig need to have done before you can go to NW fest? I know it is kinda early to think that far ahead, but lets here it anyway.

1 5 new Maxxis tires in the 33" flavor,

2 In order to fit those tires I have to install 2 more inches of lift.

3 I need wheels that don't make my tires rub on everything.

4 Replace my coax cable on my CB after Evans killed it.

5 I would "LIKE" to finish my bumpers someday.

6 For Michael, finish the 71 Super Beetle for the fifth year in a row

I have no car trailer and no RV to tow my jeep, So I am wheeling hardcore style, drive there and home AGAIN.

What about you?

I hate you Mojojo in a jealous kinda way :rattle: Having a new daughter has severely cut into my jeep time.

1. Never had time to do #2. So I got a sweet :wierd: set of FREE BFG A/Ts One word FLOTATION

2. NOPE, Parts sitting in the garage

3. DONE

4. NOPE, never made a new mount. Going to the old stand by, handheld.

5. NOPE, need to do more trimming this weekend to run the BFGs.

6. NOPE. no explanation needed

7. Reinstall locker. Saturday

8. Finish building track bar. Saturday

9. Flex out and cut off whatever gets in the way. Saturday

[JBweld]

9. Flex out and cut off whatever gets in the way. Saturday

I'll bring the sawzall, plasma cutter, and a BFH. We'll get those 35's to fit.:eyes:

[Avanteone]

I guess maybe I should fix my reduced-capacity fuel tank and skid before this event ;)

[XJourney]

I'll bring the sawzall, plasma cutter, and a BFH. We'll get those 35's to fit.:eyes:

I don't need any trimming for 35" toyos. They are barely smaller then a 33" BFG :shhh:
I would love to use the plasma but I don't have 3 phase :looser:

You still riding with me?:cheers:

[JBweld]

I don't need any trimming for 35" toyos. They are barely smaller then a 33" BFG :shhh:


Whatever Toyo hater! Besides, you shouldn't be talking smack about tires considering what you rolling on. :gag: hehehe

[XJourney]

Besides, you shouldn't be talking smack about tires considering what you rolling on. :gag: hehehe

Got snow???????:yelclap:

[mojojojo]

I hate you Mojojo in a jealous kinda way :rattle:

don't hate me. it's a lil easier to get 'er done when you got no life :tears:


and now that i've spent my retirement on the heep, i need to sell it to get gas money to get to NWfest :rattle:

[WaXJ_Skier]

and now that i've spent my retirement on the heep, i need to sell it to get gas money to get to NWfest :rattle:
gas prices are going down ATM:party:

[black89xj]

1) Find someone to slum with at Liberty

2) Change oil and grease fittin's

3) Put gas in it and point it east over the hill!

[XJLaredo]

I need to put in my rear locker.
Also need to put a spring under my gas pedal to make it harder to use.:gee:

[CanMan]

I need to put in my rear locker.
Also need to put a spring under my gas pedal to make it harder to use.:gee:

What the hell did you break now?

Wanna do the locker Sunday if you need a hand?

[IXNAYXJ]

What the hell did you break now?A tire. So much for the vaunted MT/R sidewall....

-----Matt-----