Parts swap at WF

[85xjwoody]

Anybody have parts they want to offer to bring along to get rid of? I am starting to get a small collection in the garage and need some room so I will get a list of what I have to offer.
If there is something you need or have to offer post it up. I just might need it.

Kim

[Dano]

xj 44 and D30 with lockright, see classifieds.
alos stock pre96 gas skid (metal for you dumbasses that think i would try to sell a plastic one)

[Rev Den]

Stock D30 shafts, disconnect style.
Stock front steering
Stock front sway bar.

Any takers?

Rev

[RedHeep]

Stock coil springs
2 sets stock leaf springs
Used Rusty's 3" springs coil/leaf pack
Dana 30/35 w/3.55's open/open
Stock front/rear bumpers
1 set (L/R) calipers and rotors
Complete 4.0 HO (needs rebuilt)
'91 intake/exhaust manifold
'94 injector rail with injectors
Stock draglink and tierod
4 31" high tec retreads on bridgestone cases (8,000 miles) w/spare

I've been collecting.

[seanR]

I have two side rear windowS, complete with "go fast" stickers.

[scoobyxj]

Stock coil springs
2 sets stock leaf springs
Used Rusty's 3" springs coil/leaf pack
Dana 30/35 w/3.55's open/open
Stock front/rear bumpers
1 set (L/R) calipers and rotors
Complete 4.0 HO (needs rebuilt)
'91 intake/exhaust manifold
'94 injector rail with injectors
Stock draglink and tierod
4 31" high tec retreads on bridgestone cases (8,000 miles) w/spare

I've been collecting. I might be interested in the spring packs if they don't sag real bad. I need a set of cheep 3' springs to hold me over 'till I can go 4.5" BDS.

Prepmech, If you're still offering those flairs bring them I'll take them off your hands if you're still giving them away.


I have
1: Foglights stock
2: fenderflairs stock (Partroit Blue)
3: seats front (w/o adj. head rest), and rear (both pieces) in V/G condition (could use a cleaning though)
4: K&N air filter for the stock air box ( comes with cleaning/oiling kit)
5: 97+ keyless entry (module with two matching fobs)
6: Depending if I don't use them I may have some Procomp driving lights 2 55W driving, 2 55W flood (both 6' round) 2 100W driving 4x6 (used very little)

Let me know if you're interested 'cause I'm not bringing any of it if no one wants any of it.

[rokclimbertx]

Scooby.... what color are those seats?


swap meet stuff:
warn transformer grill guard & winch mount
TJ fender flares (front, grey)

[RedHeep]

I might be interested in the spring packs if they don't sag real bad. I need a set of cheep 3' springs to hold me over 'till I can go 4.5" BDS.

Prepmech, If you're still offering those flairs bring them I'll take them off your hands if you're still giving them away.


I have
1: Foglights stock
2: fenderflairs stock (Partroit Blue)
3: seats front (w/o adj. head rest), and rear (both pieces) in V/G condition (could use a cleaning though)
4: K&N air filter for the stock air box ( comes with cleaning/oiling kit)
5: 97+ keyless entry (module with two matching fobs)
6: Depending if I don't use them I may have some Procomp driving lights 2 55W driving, 2 55W flood (both 6' round) 2 100W driving 4x6 (used very little)

Let me know if you're interested 'cause I'm not bringing any of it if no one wants any of it.

I don't think they sag much, they are 3 years old or so. I can take measurements if you want. Don't know how much they're worth.

[scoobyxj]

Scooby.... what color are those seats?


swap meet stuff:
warn transformer grill guard & winch mount
TJ fender flares (front, grey) http://img.photobucket.com/albums/v314/scoobyxj/DSCF0865.jpg

http://img.photobucket.com/albums/v314/scoobyxj/DSCF0872a.jpg

http://img.photobucket.com/albums/v314/scoobyxj/DSCF0869a.jpg

The indentation is just where the cushon was laying on the latch for the bottom part. Oh' and the sliders come with them. Might be willing to trade you for the Warn setup.

[scoobyxj]

I don't think they sag much, they are 3 years old or so. I can take measurements if you want. Don't know how much they're worth.What would you say to a bill?

[rokclimbertx]

The indentation is just where the cushon was laying on the latch for the bottom part. Oh' and the sliders come with them. Might be willing to trade you for the Warn setup.


i'll definately bring it with me then... i think i have a picture somewhere of when it was on the jeep i;ll post soon as i find it...

[rokclimbertx]

http://i118.photobucket.com/albums/o94/rokclimbertx/warnguard.jpg

there ya go... finally gave me a reason to sign up at photobucket...

[87manche]

Hey Mark,
You still want that trans and t-case back?
I've also got:
Stock Mj springs
MJ rollpan
A complete MJ D35 with 3.55 gears
a bunch of brake parts
a set of stock steelies (5)
a set of stock MJ flares with all the hardware

[RedHeep]

What would you say to a bill?


Deal.

[sgtmack]

I have a front Draw-tite front hitch and detachable winch mount I could bring.

[scoobyxj]

Deal. Shaking of hands

http://i118.photobucket.com/albums/o94/rokclimbertx/warnguard.jpg

there ya go... finally gave me a reason to sign up at photobucket...

Looks to be what I was looking for. All mounting hardware right too (don't care about bolts)? Trade straight up? Your call.

[scoobyxj]

I have
1: Foglights stock
2: fenderflairs stock (Partroit Blue)
3: seats front (w/o adj. head rest), and rear (both pieces) in V/G condition (could use a cleaning though)
4: K&N air filter for the stock air box ( comes with cleaning/oiling kit)
5: 97+ keyless entry (module with two matching fobs)
6: Depending if I don't use them I may have some Procomp driving lights 2 55W driving, 2 55W flood (both 6' round) 2 100W driving 4x6 (used very little)

Let me know if you're interested 'cause I'm not bringing any of it if no one wants any of it.

7: A Mid sized CB a Unidin IIRC (it's out in the building right now) set up for portable use (cig plug) with a K30 (IIRC) magnet antenna.
8: a black 4" Firestik antenna (however it is tuned by removing wire at the tip so unless it hits dead on, or needs shortened you aren't going to be able to use it)

[85xjwoody]

I have a front Draw-tite front hitch and detachable winch mount I could bring.

I am interested in this. I just might be bolting that up while still on the trailer. Let me know what you think.

Kim

[sgtmack]

Make me an offer Kim. I'll even help put on when we get there.

[87manche]

forgot shackles, I've got stock Mj shackles, they'll need a new bushing.

[rokclimbertx]

Looks to be what I was looking for. All mounting hardware right too (don't care about bolts)? Trade straight up? Your call.


All hardware and bolts... Straight up, sounds like we gotta deal... thanks scooby..

[HaleYes]

I have a set of front TJ flares up for grabs minus the reflexes. Looking for 2 more rear TJ flares if anyone has some.

[ILLXJ]

a set of stock MJ flares with all the hardware

How much you want for the rears? JIM.

[ILLXJ]

I have:
non c-clip D35 shafts
front ds 28-31.25"
2.5L motor parts
interior trim (89)
HL switch (89)
fact. CA's 1 set
stock XJ shackles
stock coil spring isolators
stock coil springs
rear ds 1 @ 33" 1 @ 28"
97+ LH front bumper end cap

More later. JIM.

[87manche]

How much you want for the rears? JIM.
don't even know what they're worth.
You wouldn't by chance have any TJ flare would you?
Most of the bolts broke when I was removing them, but I've got the metal backing plates, you'd just have to drill them out and put some hardware on them.

[rokclimbertx]

TJ front flares? i have a set available... i could use a spare front & rear DS... maybe the 3 of us can work something out?

[HaleYes]

don't even know what they're worth.
You wouldn't by chance have any TJ flare would you?
Most of the bolts broke when I was removing them, but I've got the metal backing plates, you'd just have to drill them out and put some hardware on them.

Jim dosen't have any TJ flares but, I do. I have TJ fronts only.

[jcroffroad]

I have a set of 4 tj flares. Would take $25 for them.

brian

[HaleYes]

I have a set of 4 tj flares. Would take $25 for them.

brian

I'll take all 4 of them.

I only need the rears though.

So, add another set of front TJ flares to my list of tradeable parts.

:D

Hale

[87manche]

I'll take all 4 of them.

I only need the rears though.

So, add another set of front TJ flares to my list of tradeable parts.

:D

Hale
sonofabitch, 40 minutes too late.

[jcroffroad]

Do you want them before WF? I can ship them pretty easily. I might have another set...let me check.

[87manche]

if you've got another set put me down for them.

Jim, your MJ flares cost $25
:D
no need to ship, I'll put them on in the flatnasty parking lot with some zip ties :)

[HaleYes]

Do you want them before WF? I can ship them pretty easily. I might have another set...let me check.
I can wait, I'll just grab them at WF.

Hale

[ILLXJ]

More:
Hi lift mounts
1set of grey flares
5 sport center caps (black)
tan cargo cover
air cond condenser
2 steel sport rims (black)
factory front bumper w/mounts
speedo gears from a 96 32&35 teeth
homemade trail doors

JIM.

[ILLXJ]

Non-Jeep stuff:
small K-mart brand bench grinder
1 set steel car ramps
air compressor compressor--no motor or tank--never used.
http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0269.jpg

JIM.

[HaleYes]

1 roll of barbed wire
2 five gallon buckets
1 youth sized tennis racket
2 cans of un-opened tennis balls
1 12V Power Wheels Battery won't hold charge
3 cans of Ol Roy chopped beef dog food
1 half used large bottle of Tide laundry detergent
assorted nuts and bolts (just ask and I'll look)
Small igloo cooler /w/ small crack
1 crank style pencil sharpener
3 Proto left handed #3 phillips screwdrivers
Girls clothing from newborn to 4T
3 rubbermaid 30gallon trash cans, 1 missing lid
1 push lawnmower wheel
1 cheap noname cutlery set
1 electric tredmill
1 Black and Decker 12v cordless drill /w/ 2 junk batteries and charger.
1 12"x14"x8" used cardboard box
3 empty 2 liter bottles of Sams Choice Root Beer
Last 3 months of USA Today newspaper
2 8x10 picture frames
4 rusty 1" ratchet straps yellow in color
1 Pardridge in a pear tree
2 Turtle Doves
3 French hens
1 stainless steel kitchen sink

More later.


Hale

[87manche]

I want the partridge, but only if it comes with the whole tree.

[seanR]

1 Black and Decker 12v cordless drill /w/ 2 junk batteries and charger.
Dibs....

[scoobyxj]

1 Black and Decker 12v cordless drill /w/ 2 junk batteries and charger.
Dibs.... seconds on the Drill, but if not Okey I have a good battery (PS130) for you if it will fit. I can't find the charger for mine.

Oh' what would you want for the tread mill? My shed is outgrowing my tool.

[HaleYes]

seconds on the Drill, but if not Okey I have a good battery (PS130) for you if it will fit. I can't find the charger for mine.

Oh' what would you want for the tread mill? My shed is outgrowing my tool.

FYI guys!

The list of junk I posted was an attempt to be funny. I have none of that stuff. Well, I could probably scrounge up some of it, but I'm not. Sorry for any disappointment I may have caused.:doh:

Hale

[scoobyxj]

FYI guys!

The list of junk I posted was an attempt to be funny. Hale Well that back fired on you like eating a been burrito covered in habanera sauce didn't it!

[HaleYes]

Well that back fired on you like eating a been burrito covered in habanera sauce didn't it!
Yeah, I guess so....


:twak: to me

[jcroffroad]

if you've got another set put me down for them.

Ok, I have another set for you, $25.

[bshaw]

homemade trail doors
JIM.
got any pics Jim? it's becoming tradition that i buy something off you at WF..... :dunno:

[seanR]

FYI guys!

The list of junk I posted was an attempt to be funny. I have none of that stuff. Well, I could probably scrounge up some of it, but I'm not. Sorry for any disappointment I may have caused.:doh:

Hale
You are an ASS!
I had my hopes up and everything!

[HaleYes]

got any pics Jim? it's becoming tradition that i buy something off you at WF..... :dunno:
Straight from Jim's photobucket album.......

http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0221.jpg

http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0220.jpg

http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0226.jpg

http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0225.jpg

http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0224.jpg

[Pat]

FYI guys!

The list of junk I posted was an attempt to be funny. I have none of that stuff. Well, I could probably scrounge up some of it, but I'm not. Sorry for any disappointment I may have caused.:doh:

Hale

I think it's because you made such a long f'n list! i just read the first three and thought "WTF does he think this is, a yard sale?"

reminds me of a thread i saw once..."what 3 things would to take to the check out line at wal-marts to freak out the cashier?"

[RedHeep]

Any interest in these axles?

D30/35 3.55 open/open from my '91

If not, I'm not going to plan to bring them.

[What Rd]

Straight from Jim's photobucket album.......

http://i6.photobucket.com/albums/y249/ILLXJ/HPIM0221.jpg


How much for Jim's toilet paper?

[What Rd]

2 sets stock leaf springs

I might be interested in a set of these. How flat are they and how much would you give me to take them off your hands? :eeks1:

[ILLXJ]

How much for Jim's toilet paper?

It's gone. You used it all on the last trip.:shocked: :eek::twak: JIM.

[What Rd]

It's gone. You used it all on the last trip.:shocked: :eek::twak: JIM.
Oh yea . . .
I forgot about that attempt at the pavement slab. :shocked:

:D

[RedHeep]

I might be interested in a set of these. How flat are they and how much would you give me to take them off your hands? :eeks1:

They're in good shape. For you, the smartass price of 1 million dollars.

[What Rd]

They're in good shape. For you, the smartass price of 1 million dollars.
Ouch! :scared:
Guess I should have kept mine, eh? How about $20?

[RedHeep]

Ouch! :scared:
Guess I should have kept mine, eh? How about $20?

Deal.

[What Rd]

Deal.
(shaking of hands) thanx :cheers:

[87manche]

Ok, I have another set for you, $25.
sweet!

[seanR]

I looked though the parts upstairs at my shop this AM...
I have a butt load of carriers, rings and pinions, 3:55-4:10 Dana 30, 35, 44, and Cryco 8.25", let me know what you need.
I have a stock drag link.
I still have rear side windows
I also have an 8.75" master install kit because the dumb ass at the NAPA is deaf.
I have a black steely rim, 5 on 4.5, 15" X 8", <4.5" BS, I think...>
A stock Air filter
A stock air box for a 2.5l
2 stock AM FM cassette radios out of a 1990 and 1989
Hell, if the price is right I have a stock AM FM cassette radio out of a 2000 'cause my speakers don't work any more...
If no one takes this schtuff, I will make one hell of a booby prize with it all!

[87manche]

I have a black steely rim, 5 on 4.5, 15" X 8", <4.5" BS, I think...>

this might make a nice rim for when I finally get a real spare.
how much?

[Lawn Cher']

I looked though the parts upstairs at my shop this AM...
I have a butt load of carriers, rings and pinions, 3:55-4:10 Dana 30, 35, 44, and Cryco 8.25", let me know what you need.
I have a stock drag link.
I still have rear side windows
I also have an 8.75" master install kit because the dumb ass at the NAPA is deaf.
I have a black steely rim, 5 on 4.5, 15" X 8", <4.5" BS, I think...>
A stock Air filter
A stock air box for a 2.5l
2 stock AM FM cassette radios out of a 1990 and 1989
Hell, if the price is right I have a stock AM FM cassette radio out of a 2000 'cause my speakers don't work any more...
If no one takes this schtuff, I will make one hell of a booby prize with it all!

You got a 4.10 HPD44 R&P? And if Nate changes his mind about the rim and it is the same as the ones I already got from you I'll take that too.

Nate, I still would like the tranny & T-case back, and that roll pan as well.

[seanR]

I will throw all of it to a box
can you say grab bag....


Someone bring a welder, and I'll make a nifty thing....

[87manche]

Nate, I still would like the tranny & T-case back, and that roll pan as well.
holy shit I get to get rid of the roll pan?!
did we talk price on that or not, I honestly can't remember.

[BRIANHO13]

You got a 4.10 HPD44 R&P? hp/lp don't matter, but I am sure you knew that.

[Dano]

also have 2dr rear solid glass
as well as hatch with defroster.
I am not bringing this stuff unless it is sold prior to weekend
http://farm1.static.flickr.com/139/372058473_fb1d77c50c.jpg?v=0
:gonnablow

[bshaw]

if anyone is interested, i have a lift gate/hatch for a pre 97. it's white, tinted, heated, has a wiper, and speakers. in really good shape, and I'll sell it for really cheap. pm me if interested, i can bring it to WF.

[Lawn Cher']

hp/lp don't matter, but I am sure you knew that.

What? Of course there's a difference between hp & lp gearsets. Are you nuts?

[Lawn Cher']

holy shit I get to get rid of the roll pan?!
did we talk price on that or not, I honestly can't remember.

Didn't I give you extra steering and some other goodies with those axles? I can't believe you're going to nickel-and-dime me for a rusty piece of sawzall edged sheetmetal.

[BRIANHO13]

What? Of course there's a difference between hp & lp gearsets. Are you nuts?

My bad thought you were asking for a 4.10 carrier.

[87manche]

Didn't I give you extra steering and some other goodies with those axles? I can't believe you're going to nickel-and-dime me for a rusty piece of sawzall edged sheetmetal.
it's a cutting wheel edged piece of rusty sheetmetal, and I honestly couldn't remember.
you been away too long, got all thin skinned.
you can have it though, it's just taking up space, but I couldn't bring myself to pitch it.

[Prepmech]

I've got the HP30 disco with 4.56s still sitting in my garage taking up space.

[IntrepidXJ]

anyone got an non-disco HP30 housing, maybe with 3.55 gears laying around? don't need shafts or brakes or anything

let me know

[RedHeep]

anyone got an non-disco HP30 housing, maybe with 3.55 gears laying around? don't need shafts or brakes or anything

let me know

Have the whole axle sitting in the garage. Will bring if you want it. Open/3.55 from my '91. If you don't want the shafts, I'll pull them for me for emergencies.

[Lawn Cher']

it's a cutting wheel edged piece of rusty sheetmetal, and I honestly couldn't remember.
you been away too long, got all thin skinned.
you can have it though, it's just taking up space, but I couldn't bring myself to pitch it.

Sorry, I was in a mood.

[HaleYes]

anyone got an non-disco HP30 housing, maybe with 3.55 gears laying around? don't need shafts or brakes or anything

let me know

Are you just wanting to get away from LP??

[87manche]

Sorry, I was in a mood.
yeah I figured you were PMS'ing.
no biggie, I still love ya :)

[Dano]

also have these 4 for $120 with center caps
http://www.midwestjeepthing.com/jeep/member/images/dano/Jan29_0001.jpg

[seanR]

also have these 4 for $120 with center caps
http://www.midwestjeepthing.com/jeep/member/images/dano/Jan29_0001.jpg
Details....

[Dano]

Details....
15x8 3-4" aprox BS

[Dano]

also have a radiator from a 93 XJ still has hoses connected. good shape

[85xjwoody]

Anybody have any spare 8.25 shafts? 27 spline.

Kim

[bshaw]

Anybody have any spare 8.25 shafts? 27 spline.

Kim
yes. pm me Kim

[w_howey]

anyone got an non-disco HP30 housing, maybe with 3.55 gears laying around? don't need shafts or brakes or anything

let me know


I've got an entire axle, if'n you need it before...

[IntrepidXJ]

I've got an entire axle, if'n you need it before...

i don't need it before.....but i am interested

[RedHeep]

i don't need it before.....but i am interested

Mine's not good enough? :)

[IntrepidXJ]

Mine's not good enough? :)

his is closer, and i wouldn't have to drag it home from WF....i can go get it anytime :)

[RedHeep]

his is closer, and i wouldn't have to drag it home from WF....i can go get it anytime :)

Just messin with you :)

[Broncosix]

Would like to come and bring the following parts that I have lying around, but would have to have some committments to pay for trip. Following parts could be delivered to WF:

1. Complete set of Seats from a 91 grey in color excellent condition no rips/tears, Seats are manual position. $200.00

2. Complete set of Door from the 91 XJ 4 doors no rust grey in color windows and locks are power. $250.00

3. Rear lift gate from 91 XJ grey in color no cracks excellent condition. $100.00

4. Complete Dana 30 and 35 from 91 XJ non-disconnect 3:55 gears stock. $150.00 pair.

5. Rear full width Dana 60 complete axle. Disc brakes, 4:88 gears w/ Detroit locker. $1000.00

Let me know if I should make the trip.

Thanks

[BRIANHO13]

Went to the JY for swap meet parts today (gotta pay for fuel).

got 2 rear xj44 shafts I would replace the studs, but the bearings and splines are perfect $55/pc.

Also picked up mark V rear disc brake stuff for the big bearing ferd 9"
for $200 you get brackets, calipers, hoses and all the hardware.

[BOB]

anybody have a good 33" spare on a rim?

...BOB

[Lawn Cher']

Went to the JY for swap meet parts today (gotta pay for fuel).

got 2 rear xj44 shafts I would replace the studs, but the bearings and splines are perfect $55/pc.

Also picked up mark V rear disc brake stuff for the big bearing ferd 9"
for $200 you get brackets, calipers, hoses and all the hardware.

Interested in the D44 shafts. Prepmech should snatch up that 9" disk stuff.

[HaleYes]

Anyone need front TJ flares?

[85xjwoody]

anybody have a good 33" spare on a rim?

...BOB

I will have a 33" on a rim for a spare and two others without a rim I am bringing along. If you can find a rim I have a spare tire you can have. HTH

Kim

[Rev Den]

Anyone need front TJ flares?

How much?

Rev

[HaleYes]

How much?

Rev

2 RHXJ stickers.

:D

[BRIANHO13]

Interested in the D44 shafts. Prepmech should snatch up that 9" disk stuff.
MArk, there is someone very interested in these, let me know if you want them for sure. HAve prepmech pm me.

[Rev Den]

2 RHXJ stickers.

:D

Sold.

Rev

[bshaw]

again I have a tailgate/liftgate for a pre 97. $40

stock pitman arm. $a beer

stock steering linkage. $a beer

stock tc skid for a 242. $10-sold

stock engine skid. $10

[85xjwoody]

again I have a tailgate/liftgate for a pre 97. $40

stock pitman arm. $a beer

stock steering linkage. $a beer

stock tc skid for a 242. $10-sold

stock engine skid. $10

Engine skid sold:D I will pick up at WF. Thanks.

Kim

[BRIANHO13]

MArk, there is someone very interested in these, let me know if you want them for sure. HAve prepmech pm me.
9" stuff, is sold.

[bshaw]

Engine skid sold:D I will pick up at WF. Thanks.

Kim
just a few mins. to late Kim. :D

[85xjwoody]

just a few mins. to late Kim. :D

No problem.

Kim

[XJ_ranger]

stock pitman arm. $a beer


need this.

[HaleYes]

Rev's got one set of front TJ flares spoken for. I'll have another set of front TJ flares to get rid of as well. Anyone interested?

Hale

[bshaw]

again I have a tailgate/liftgate for a pre 97. $40

stock pitman arm. $a beer- spoken for

stock steering linkage. $a beer

stock tc skid for a 242. $10- sorry this is not sold yet

stock engine skid. $10-sold

[RedHeep]

Brian I'll take that Tcase skid for the 242.

Do I need anything extra to bolt it up?

Josh

[87manche]

Brian I'll take that Tcase skid for the 242.

Do I need anything extra to bolt it up?

Josh
do you have the nutcerts in your frame already?

[RedHeep]

do you have the nutcerts in your frame already?

Don't know, I'd have to look.

I'm just swamped with work and can't make it out to the parking lot. :)

[HaleYes]

Don't know, I'd have to look.

I'm just swamped with work and can't make it out to the parking lot. :)
...but I have time to screw around on the internet.

[RedHeep]

...but I have time to screw around on the internet.

Your tax dollars at work. :looney:

[bshaw]

Brian I'll take that Tcase skid for the 242.

Do I need anything extra to bolt it up?

Josh
Are you talking to me Josh? If so, it's not Brian. It's Jeremy :D. It's yours if your talking to me?

I used self tappers into the frame and a nut/bolt combo in the crossmember. Not hard.....

[HaleYes]

Are you talking to me Josh? If so, it's not Brian. It's Jeremy :D. It's yours if your talking to me?

I used self tappers into the frame and a nut/bolt combo in the crossmember. Not hard.....

Dude, he called you Brian! I wouldn't sell it to him.

Hale

[bshaw]

Dude, he called you Brian! I wouldn't sell it to him.

Hale
:laugh2:
that's okay, just wait until initiation!!

[BRIANHO13]

I almost corrected him, but figured Jeremy would be honored so I left it alone.

[RedHeep]

All you guys type alike.

[bshaw]

All you guys type alike.
I assume that's a yes.....:D
again I have a tailgate/liftgate for a pre 97. $40

stock steering linkage. $a beer

stock pitman arm. $a beer -spoken for

stock tc skid for a 242. $10-sold

stock engine skid. $10 -sold

[RedHeep]

Yessir :)

[Lawn Cher']

I have a stock engine skid for ya Kim if you still need one. I might need one of those tars (that's how they say tires around Flat Nasty,) if I determine that my one that keeps going flat is actually punctured rather than just dirt packed in the bead. I'll let you know.

[85xjwoody]

I have a stock engine skid for ya Kim if you still need one. I might need one of those tars (that's how they say tires around Flat Nasty,) if I determine that my one that keeps going flat is actually punctured rather than just dirt packed in the bead. I'll let you know.

I will take the skid off your hands. Yes, let me know about the tire.

Kim

[ILLXJ]

Pre 97 front drivers side door. Brand new. Primered. No innards-door only. $50. JIM.

[Chadd]

Anyone else happen to have a set of factory skids for a 97 with a 242? Or a couple of good struts for the rear hatch?

[Prepmech]

Cleaning out the garage today, found a few more things...

I have three stock steel 5-spoke wheels off of a '00.

Ford 9" third-member, not nodular, 3.00 gears, open.

going to get thrown away if no-one wants this stuff.
Let me know before Sunday night, leaving for MO Monday morning.

[Lawn Cher']

I'll take the wheels if noone else wants them.

Throw that 3rd member on ebay.

[Lawn Cher']

I will take the skid off your hands. Yes, let me know about the tire.

Kim

Thanks, but my tires are fine... just mud and gravel caked in the bead.

[RedHeep]

Last chance for anything I have. Set of stock leafs still, front/rear stock bumpers, brand new monroe stock shocks, 4 235/75r15's plus spare on stock limited wheels.

Anybody need an intake or exhaust manifold? The exhaust manifold needs new studs.

Make me an offer, help pay for gas.

[HaleYes]

Last chance for anything I have. Set of stock leafs still, front/rear stock bumpers, brand new monroe stock shocks, 4 235/75r15's plus spare on stock limited wheels.

Anybody need an intake or exhaust manifold? The exhaust manifold needs new studs.

Make me an offer, help pay for gas.

What year intake manifold?

[RedHeep]

What year intake manifold?

Pretty sure '94. Came on the engine I bought to replace mine last year. The guy didn't exactly know what year the engine was, it was one of those big engine houses. Has injectors and rail still on it.

[HaleYes]

Pretty sure '94. Came on the engine I bought to replace mine last year. The guy didn't exactly know what year the engine was, it was one of those big engine houses. Has injectors and rail still on it.

Thanks but, no thanks. If I could snag one of the 99+ intakes for cheap, I'd be all over it.

Hale

[RedHeep]

Thanks but, no thanks. If I could snag one of the 99+ intakes for cheap, I'd be all over it.

Hale

That's what everyone says. If I had a 99+, it'd be on the heep.

[scoobyxj]

Last chance for anything I have. Set of stock leafs still, front/rear stock bumpers, brand new monroe stock shocks, 4 235/75r15's plus spare on stock limited wheels.

Anybody need an intake or exhaust manifold? The exhaust manifold needs new studs.

Make me an offer, help pay for gas.
What do you want for the exaust? I've got a buddy that has a cracked one on his 96 ZJ.

Anyone know off the top of there head if there is any difference in the two? I assume they're the same.