• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

8.8 rear driveshaft & yoke

B

barillms

NAXJA Forum User
Location
Eastern Ohio baby!
Just got an 8.8 today. What to expect as far as the rear driveshaft goes, as well as the 8.8 yoke? It now has a round flange yoke, what to replace it with? Where to buy the new yoke?
 
use a yoke adapter from a 91-97 ford ranger or go buy the adapter from ford part number E9TZ-4782-B. or go to MORE part number 221379. you will also need to fix the brake situation if you plan on putting it into a xj if you are jsut email me at [email protected] and i can send you what needs to be done since i have been retrieving the same info for like 1-1/2 months now
 
Before you go buy a new flange adaptor...

Some rare explorers came with 1310 U-joints...

Have you thought about running stronger 1330 u-joints instead?

You can also buy a 1310/1330 combo u-joint.

options options options
 
Gil BullyKatz said:
...Some rare explorers came with 1310 U-joints...

You can also buy a .. combo u-joint.
Click to expand...
I run the flange adaptor off the Explorer that my current axle came from. It uses the 1310 u-joint. I simply had the TW Shaft made with yokes that use the same 1310 joint.

Before I purchased the TW shaft, I ran an off-set (combo) u-joint.

Les
 
You must log in or register to reply here.

Similar threads

O
SYE vs Fixed Yoke spline geometry
Replies
7
Views
3K
RCP Phx
R
E
SYE manufacturers....I can't find a clear answer.
Replies
9
Views
444
Trouble
T
R
Daystar transmission mount
Replies
5
Views
1K
Rotorwash
R
W
Rear Driveshaft length
Replies
2
Views
3K
75SV1
7
B
Passenger Side Riding Low - Any remedies?
Replies
1
Views
2K
Tim_MN
Tim_MN
Back
Top