Front is drivers side drop front w/ arb, 5:13 gears, detroit in the rear, new moser shafts all the way around, new u-joints, brakes and bearings, diff guards and crome covers. $3000 (posting for a friend, but will answer questions if you have any) Axles located in Northern Colorado.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
Built D44 axles
- Thread starter Abner
- Start date
XJ_Matt
NAXJA Forum User
- Location
- Oceanside, CA
Is this the HP D44 Front? A bolt in to XJ?
Matt
Matt
4WDXPRT
NAXJA Forum User
- Location
- Spokane, WA
How much for just the front Dana 44?
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
width? lug pattern? steering included? flat top knuckles? hp or lp? manual hubs? leafs, coils, radius arms? how do you have a chrome cover and a diff guard?
Billy
Billy
Sorry forgot some details
They are not a bolt in for an xj, they have a few tabs that need to be cut off.
the front is a lp from a wagoneer so about 62" WMS if i recall
the rear is from a scout, note sure on WMS
They are 5 on 5.5 with new warn hubs in the front.
The diff covers are the tube type.
knuckles are stock, current tie rod included (w/hiems)
Not willing to separate at this time.
They are not a bolt in for an xj, they have a few tabs that need to be cut off.
the front is a lp from a wagoneer so about 62" WMS if i recall
the rear is from a scout, note sure on WMS
They are 5 on 5.5 with new warn hubs in the front.
The diff covers are the tube type.
knuckles are stock, current tie rod included (w/hiems)
Not willing to separate at this time.
JeepFreak21
NAXJA Forum User
- Location
- Cameron Park, CA
Abner said:
Aren't waggy's usually 6 lug?
Billy
Big Red
NAXJA Forum User
- Location
- Roscoe, IL 61073
JeepFreak21 said:
If they're stock they should be, like Toyota's, Chevy 1/2 ton etc.
