• Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.

Fittin' 35's on only 6" of lift????

RockRod

RockRod

NAXJA Forum User
Location
Janesville Ca
I have a 2001 XJ. Currently have a temp. 3" lift and 31's.
I'm going to cut the fenders as high as I can before the body seams.
I want to fit 35's on my next 6" Lift. I'm trying to avoid going 8", but if I have to I have too. Just looking for some of your experiences or problems.
Also, so I don't waste another thread. What springs you running if your at 8" of lift. See ya, Brannon
[email protected] :party:
 
you can absolutely run 35s on 6"s, that's the height I, and I think most on this board, would recommend.

Since it's a 2001, I'm gonna assume you want to keep it looking pretty decent, get some Bushwacker cutout flares for it, and extend the bumpstops a little bit and you're good to go.

There are MANY other issues in going from 3" to 6" as well as going from 31s to 35s, I hope you are aware. This is going to cost you several thousand dollars to do it right, unless you have fabrication skills and like junkyard parts.
 
Yeap!

Going Rusty flares and I know about the $$$$, thats why I threw the temp. lift on. I myself think 6" is the perfect lift for an XJ, but I need 35's....
Thanks for the info, keep em' coming... :clap:
 
Rock rod i hope ya dont plan on playin in the rocks with the rustys flares. they dont take kindly to contact with anything. i had to trim my rustys flares to fit my 33s i would recomend TJ flares. they dont stick out as much as bush wakers and i think if you use 4 rear ones it looks super clean its what i did with mine. im runnin 5.5 front and 6.5-7 in rear and have trimed quite a bit and could fit 35s no prob. btw mines a 98

http://www.jeepnorthwest.com/tech/tjflares/tjflaresrear.html
how to do your TJ flares there

my jeep with rustys flares
http://community.webshots.com/photo/62224278/62225953jjmZRS

with TJ flares
http://community.webshots.com/photo/68239174/72954245bhylzW
 
5" and 35's

matthew

242380_96_full.jpg


242380_110_full.jpg


242380_113_full.jpg
 
Thanks for the info???

COXJ said:
Rock rod i hope ya dont plan on playin in the rocks with the rustys flares. they dont take kindly to contact with anything. i had to trim my rustys flares to fit my 33s i would recomend TJ flares. they dont stick out as much as bush wakers and i think if you use 4 rear ones it looks super clean its what i did with mine. im runnin 5.5 front and 6.5-7 in rear and have trimed quite a bit and could fit 35s no prob. btw mines a 98

http://www.jeepnorthwest.com/tech/tjflares/tjflaresrear.html
how to do your TJ flares there

my jeep with rustys flares
http://community.webshots.com/photo/62224278/62225953jjmZRS

with TJ flares
http://community.webshots.com/photo/68239174/72954245bhylzW
Click to expand...
I noticed in the "Crack" pic ya had no rear flares?? Would the TJ flares faired ok in that situation.. The Bushwackers seem to bulky. Is the TJ flares considered "the" flare. I hate doing things twice :roll:
 
Four rear TJ flares??

RockRod said:
I noticed in the "Crack" pic ya had no rear flares?? Would the TJ flares faired ok in that situation.. The Bushwackers seem to bulky. Is the TJ flares considered "the" flare. I hate doing things twice :roll:
Click to expand...
I forgot, you said four "rear flares" Do you have a pic of that?? LOL
 
Thanks COXJ

Appreciate the help without the a-hole remarks some people offer.
Any recommendations on where to get some... I've posted on some 4x4 sites in the wanted section and emailed some Ebay dealers to see if they would sell four rears... Thanks again :cheers:
 
best place to find them is on a TJ web page pople take them off and replace them farily regulary. look for about $25 each it took me about a month to find 4 rears and it does matter left to right on them also.

WIll
 
Found sme....But?

COXJ said:
best place to find them is on a TJ web page pople take them off and replace them farily regulary. look for about $25 each it took me about a month to find 4 rears and it does matter left to right on them also.

WIll
Click to expand...
So do I need two Driver side rear flares and two Passenger side flares??
Also, do I use stock mounting hardware, or use the money at the hardware store since I need L brackets and I'm sure other hardware????
Thanks Again, Brannon :peace:
 
RockRod said:
Appreciate the help without the a-hole remarks some people offer.
Click to expand...

I understand you're new to this site, but if you're refering to Cheapxj and his 3" lift w/36's remark, then you may feel a little embarassed when you see this:
scoutin00.jpg
http://www.naxja.org/forum/showthread.php?p=141863#post141863

The above link is where he explains how he did it.

Crazy? Yes, but do-able. :smoker:

Steve
 
The best way I found to mount the TJ flairs is to use 1/4 - 20 bolts with big fender washers. I put the washers on the in side of the sheet metal so if the flair gets hung it will just pull the flier off with very little damage to the jeep. I have yet to rip mine off and its amazing how much abuse the flairs can take.
 
I was not reffering to anybody on this site...

WI88XJ said:
I understand you're new to this site, but if you're refering to Cheapxj and his 3" lift w/36's remark, then you may feel a little embarassed when you see this:
scoutin00.jpg
http://www.naxja.org/forum/showthread.php?p=141863#post141863

The above link is where he explains how he did it.

Crazy? Yes, but do-able. :smoker:

Steve
Click to expand...
This site rocks on Forums... I was referring to other sites... :peace:
 
RockRod said:
This site rocks on Forums... I was referring to other sites... :peace:
Click to expand...

:rolleyes: Whoops! My bad!! Sorry for my misunderstanding. Most people would not believe that you can do what he did without first seeing his setup.

Steve
 
You must log in or register to reply here.

Similar threads

V
Engine rebuild guidance
2
Replies
34
Views
6K
RCP Phx
R
Root Moose
Mild Lifting with OEM Parts
Replies
12
Views
1K
Tim_MN
Tim_MN
M
New and need help
2 3
Replies
41
Views
9K
Evan03
E
M
Best 4.5" Lift Ride Quality
2
Replies
36
Views
7K
75SV1
7
K
How does backspacing affect handling? 3.75 vs 4.5 backspacing for 31 x 10's?
Replies
11
Views
4K
XJEEPER
XJEEPER
Back
Top