scott in NH
NAXJA Forum User
to have a upper and lower passenger side ball joints installed?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
What should it cost?
- Thread starter scott in NH
- Start date
AZ Jeff
NAXJA Forum User
- Location
- Gilbert, Arizona
Well, I have not paid to have this done, but here is my thinking:
labor cost to remove and install 2 balljoints on same side: 3 hours labor @ $65/hour = $195
material cost for 2 ball joints (with markup): $125
labor to align front end: $50
misc. shop charges: $50
Total bill: $410
Since my estimating may be grossly off, figure anywhere from $350 to $500 for one side.
labor cost to remove and install 2 balljoints on same side: 3 hours labor @ $65/hour = $195
material cost for 2 ball joints (with markup): $125
labor to align front end: $50
misc. shop charges: $50
Total bill: $410
Since my estimating may be grossly off, figure anywhere from $350 to $500 for one side.
1986xj
NAXJA Forum User
- Location
- Smithsburg, Maryland
In the stack of reciepts that came with mine are 2 from Pep boys showing $285 for one side and $320 for the other side a few months later... and this was in NYC.
HTH,
Mike B.
HTH,
Mike B.
scott in NH
NAXJA Forum User
Thanks, I'm up in New Hampshire and am hoping to find someone to do it for $200 to $250 but needed some numbers to make sure whatever I do get quoted was in the ballpark. I never have anybody do the work on my Jeep so I don't have a feel for what it should cost.
