XtremeJ
NAXJA Forum User
- Location
- East Otis, MA
I want to do a ford 8.8 conversion. I was wondering if all the carriers are the same or do you have to change them to gear down. Thanks.
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
gears on a Ford 8.8
- Thread starter XtremeJ
- Start date
- Location
- Hartsville, South Carolina
What gears will you be running?
The 8.8 can be found with 4.10's stock. Beware of the 8.8 have the tubes welded to the housing. It has a nasty habbit of spinning the tubes.....
The 8.8 can be found with 4.10's stock. Beware of the 8.8 have the tubes welded to the housing. It has a nasty habbit of spinning the tubes.....
XtremeJ
NAXJA Forum User
- Location
- East Otis, MA
i want to run 4.56s.
Mark WNC
NAXJA Member # 481
- Location
- Western NC
I swapped 3.73s for 4.88s in mine.
Static-XJ
NAXJA Member #492
- Location
- Colorado Springs
Ford has always stayed away from carrier breaks in it's corporate axles.
yellowxj
NAXJA Forum User
- Location
- Ocala, FL.
my 8.8 had 3.07 when I got it and 4.56 went in with out problems
Similar threads
