HavvkXJ
NAXJA Forum User
- Location
- other side of the pond ;)
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
speedometer gear
- Thread starter HavvkXJ
- Start date
Wiggleworm
NAXJA Forum User
- Location
- Crystal City, Mo.
HavvkXJ
NAXJA Forum User
- Location
- other side of the pond ;)
thx, purchased from eBay with long shaft - 35 tooth speedometer gear.
Rgds
Rgds
HavvkXJ
NAXJA Forum User
- Location
- other side of the pond ;)
Well well, the 35 tooth speedo-gear is not correct for D300 - so I was told recently.
A question - where can I find a proper speedo-gear for D300 unless there is another way to have the speed shown correctly on 33".
Rgds
A question - where can I find a proper speedo-gear for D300 unless there is another way to have the speed shown correctly on 33".
Rgds
831_xj
NAXJA Forum User
- Location
- Santa Cruz
HavvkXJ
NAXJA Forum User
- Location
- other side of the pond ;)
831_xj - thx for a link, Q though - have you used it in your XJ ?
on the other hand it states on their www "..SGI-5 is intended to correct only the signal feeding the electronic speedometer.."
on the other hand it states on their www "..SGI-5 is intended to correct only the signal feeding the electronic speedometer.."
831_xj
NAXJA Forum User
- Location
- Santa Cruz
Yes it works with the xj. I'm going to be using it with my 241or since it's from a jk which uses its speedometer readings from the front axle
831_xj
NAXJA Forum User
- Location
- Santa Cruz
There are a few other options but the Dakota is the cheapest option.
- Location
- San Diego
Won't work on his. No electric speedo
HavvkXJ
NAXJA Forum User
- Location
- other side of the pond ;)
confirmed with Dakota Digital - it will not work with my XJ'90 & d300. Below reply from DD.
Quote
"The SGI-5 will only works for electronic speed signals. If everything is cable operated it will not work."
Unquote
Quote
"The SGI-5 will only works for electronic speed signals. If everything is cable operated it will not work."
Unquote
Similar threads
