2000bluexj
NAXJA Forum User
- Location
- Mass
I am rebuilding my Tcase linkage as shown on bsfab. I ordered a right and a left hand rod end to make adjustability easier, and some allthread. Anyone know what I didnt realize?
-
Welcome to the new NAXJA Forum! If your password does not work, please use "Forgot your password?" link on the log-in page. Please feel free to reach out to [email protected] if we can provide any assistance.
So, im an idiot
- Thread starter 2000bluexj
- Start date
88manche
NAXJA Forum User
- Location
- Portland, Oregon
its gonna screw in one end and out on the other, essentially just moving the rod?
billyjp2
NAXJA Forum User
- Location
- Indian Orchard MA
the left hand wont work so well
2000bluexj
NAXJA Forum User
- Location
- Mass
The allthread is right hand thread
2000bluexj
NAXJA Forum User
- Location
- Mass
Yep. I ordered the left hand thread based on the same principles of putting a right hand and a left hand on a control arm. What I didnt realize, is you also have to thread accordingly. Damnit. I guess ill drill the threads out of this one and mock it up?
hubs97xj
NAXJA Forum User
- Location
- Fort Wayne, IN
Buy another right, another left, and some more allthread...
2000bluexj
NAXJA Forum User
- Location
- Mass
I have 3 ft of it as is! So i just ordered another rod end Ill just go measure.
joe_peters
NAXJA Forum User
- Location
- Grants Pass, OryGun
Drill out the rod end and install a Heli-Coil or similar product?
Justpunchit
NAXJA Member #1291
- Location
- Jaffrey, NH
I think a Heli-Coil would be just as much as the rod end! haha
ktm racer 419
NAXJA Forum User
- Location
- ROW DIALIN
i welded 2 bolts together and used right and left thread heims
i couldnt find 7/16" fine threaded rod anyway
i couldnt find 7/16" fine threaded rod anyway
